120M2 AWD Motor Grader

The M Series 2 continues the legacy of quality already established by Cat Motor Graders. The extensive validation program, combined with improvements to the manufacturing process, allows Caterpillar to further enhance our quality. The end result of this development process is a motor grader line with breakthrough technologies, tested in the field and built around real applications and real customer needs. M Series 2 Motor Graders meet Tier 4 Interim/Stage IIIB equivalent emission standards.

Request a Quote
Base Power (1st gear) - Net
145.0 hp
Operating Weight - Typically Equipped
41859.0 lb
Blade Width
12.0 ft
Engine Model
Cat® C7.1 ACERT™

Product Specs


Base Power (1st gear) - Net
Engine Model
Cat® C7.1 ACERT™
Speed @ Rated Power
2,100 rpm
AWD Range - Net
114-156 kW (153-209 hp)
AWD Range - Net (metric)
114-156 kW (155-212 hp)
Base Power (1st gear) - Net (metric)
Base Power (all gears) - Net
Tier 4 Interim/Stage IIIB equivalent
Hi Ambient - Fan Speed - Standard
1,000 rpm
Maximum Torque
Standard Capability
109.0° F
Torque Rise
VHP Plus Range - Net
108-141 kW (145-189 hp)
VHP Plus Range - Net (metric)
108-141 kW (147-192 hp)
VHP Plus - gear 1F, Net
VHP Plus - gear 2F, Net
VHP Plus - gear 3F, Net
VHP Plus - gear 4F, Net
VHP Plus - gear 5F, Net
VHP Plus - gear 6F, Net
VHP Plus - gear 7F, Net
VHP Plus - gear 8F, Net
Number of Cylinders
Derating Altitude
High Ambient - Fan Speed - Maximum
1,350 rpm
High Ambient - Fan Speed - Minimum
500 rpm
High Ambient Capability
122.0° F


Operating Weight - Typically Equipped
Gross Vehicle Weight - Maximum - Front Axle
Gross Vehicle Weight - Maximum - Rear Axle
Operating Weight, Typically Equipped - Front Axle
Operating Weight, Typically Equipped - Rear Axle
Gross Vehicle Weight - Base - Front Axle
Gross Vehicle Weight - Base - Rear Axle
Gross Vehicle Weight - Maximum - Total
Gross Vehicle Weight - Base - Total
Operating Weight, Typically Equipped - Total


Blade Width
Moldboard - Height
Moldboard - Thickness
Arc Radius
Throat Clearance
Cutting Edge - Width
Cutting Edge - Thickness
End Bit - Width
End Bit - Thickness
Blade Pull - Base GVW
Blade Pull - Maximum GVW
Blade Down Pressure - Base GVW
Blade Down Pressure - Maximum GVW

Operating Specifications

Top Speed - Forward
Top Speed - Reverse
Turning Radius, Outside Front Tires
Steering Range - Left/Right
Articulation Angle - Left/Right
Forward - 1st
Forward - 2nd
Forward - 3rd
Forward - 4th
Forward - 5th
Forward - 6th
Forward - 7th
Forward - 8th
Reverse - 1st
Reverse - 2nd
Reverse - 3rd
Reverse - 4th
Reverse - 5th
Reverse - 6th

Service Refill

Fuel Capacity
Cooling System
Hydraulic System - Tank
Engine Oil
Transmission/Differential/Final Drives
Tandem Housing (each)
Front Wheel Spindle Bearing Housing
Circle Drive Housing

Power Train

Forward/Reverse Gears
8 Forward/6 Reverse
Direct Drive, Powershift
Brakes - Service
Multiple Oil Disc
Brakes - Service, Surface Area
Brakes - Parking
Multiple Oil Disc
Brakes - Secondary
Dual Circuit

Hydraulic System

Circuit Type
Pump Type
Variable Piston
Pump Output
Maximum System Pressure
Reservoir Tank Capacity
Standby Pressure


Drawbar - Width
Circle - Diameter
Circle - Blade Beam Thickness
Drawbar - Height
Front Frame Structure - Height
Front Frame Structure - Width
Drawbar - Thickness
Front-Top/Bottom Plate - Width
Front-Top/Bottom Plate - Thickness
Front Axle - Height to Center
Front Axle - Wheel Lean, Left/Right
Front Axle - Total Oscillation per Side

Blade Range

Circle Centershift - Right
Circle Centershift - Left
Moldboard Sideshift - Right
Moldboard Sideshift - Left
Maximum Blade Position Angle
Blade Tip Range - Forward
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
Maximum Shoulder Reach Outside of Tires - Left
Maximum Lift above Ground
Maximum Depth of Cut


ISO 3450
ISO 3471/ISO 3449
ISO 6394; ISO 6395
ISO 5010


Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
Front, V-Type, 5 or 11 Tooth - Working Width
Front, V-Type: Working Width
Mid, Straight - Ripping Depth, Maximum
Mid, Straight - Scarifier Shank Holder Spacing
Mid, Straight - Scarifier Shank Holders
Mid, Straight - Scarifying Depth, Maximum
Mid, Straight - Working Width
Mid, V-Type - Scarifier Shank Holder Spacing
Mid, V-Type - Scarifier Shank Holders
Mid, V-Type - Scarifying Depth, Maximum
Mid, V-Type - Working Width


Ripper Shank Holder Spacing
Ripping Depth - Maximum
Ripper Shank Holders
Penetration Force
Pryout Force
Machine Length Increase, Beam Raised


Sidewall Thickness - Inner
Sidewall Thickness - Outer
Drive Chain Pitch
Wheel Axle Spacing
Tandem Oscillation - Front Up
Tandem Oscillation - Front Down


U.S. EPA Tier 4 Interim/EU Stage IIIB equivalent


17.5 R25 Tire (14x25 Rim) Dimension Adjustments – Height to Dimensions 1, 2, 8, 9, 10
17.5 R25 Tire (14x25 Rim) Dimension Adjustments – Length Front Tire to Rear of Machine Dimension 6
17.5 R25 Tire (14x25 Rim) Dimension Adjustments – Width to Tire Centerline Dimension 11
17.5 R25 Tire (14x25 Rim) Dimension Adjustments – Width to Tire Front/Rear Tires Dimensions 12, 13
Dimension changes may vary by brand/type and inflation of tires.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.88 metric tonnes.

Benefits & Features

Operator Station

Comfort, productivity, advanced technology


Angled cab doors, a tapered engine enclosure and patented sloped rear window assure excellent visibility to the work area.

Maximum Control, Maximum Comfort

Caterpillar has built the most comfortable cab in the industry, replacing the control levers and steering wheel with two joystick controls, and lengthening the cab for more leg room. Machine design features, like angled doors, provide excellent visibility.

Operator Comfort

The Cat Comfort Series suspension seat and arm/wrist rests are fully adjustable for improved comfort and productivity. Extra leg room, easy-to-reach long-life rocker switches and revolutionary joystick controls make this the most comfortable cab in the industry.

Standard HVAC System

The high capacity system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.

Low Interior Sound and Vibration Levels

Multiple isolation mounts along with relocated hydraulic pump and valves significantly improve operator comfort and productivity.

In-Dash Instrument Cluster

Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.

Steering and Implement Controls

Unprecedented precision and ease of operation

Ease of Operation

Two electro-hydraulic joysticks require up to 78% less hand and wrist movement than conventional lever controls for greatly enhanced operator comfort and efficiency. The intuitive control pattern allows both new and experienced operators to quickly become productive.

Electronically adjustable control pods help position joysticks for optimal comfort, visibility and proper operation.

Joystick Functions

  • The left joystick primarily controls the machine direction and speed including steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
  • The right joystick primarily controls drawbar, circle and moldboard functions including right moldboard lift cylinder and float, moldboard slide and tip, circle turn, drawbar center shift, electronic throttle control and manual differential lock/unlock.

Intuitive Steering Control

Joystick lean angle mirrors the steer tires’ turning angle. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for comfortable and predictable control.

Electronic Throttle Control

Provides easy, precise and consistent throttle operation. An automatic/manual mode switch offers flexibility for different applications and operator preferences.

Articulation Return-to-Center

Automatically returns the machine to a straight frame position from any angle with the touch of a button.

Auxiliary Pod and Ripper Control (Optional)

Ergonomically positioned to allow simple, comfortable operation for the multiple hydraulic options.

  • Four fingertip controls and a mini joystick maximize control of up to six hydraulic circuits. Individual functions can be programmed with Electronic Technician (Cat ET). The auxiliary hydraulic pod is provided when the machine is configured with three or more auxiliary functions.
  • Infinitely variable roller switches provide precise control of the rear ripper and/or front lift group (when equipped).

Optional Advanced Control Joysticks

Cat Advanced Control Joysticks allow the operator to easily control automated grading solutions, Cat GRADE with Cross Slope, AccuGrade™, and Snow Wing. Both new and experienced operators can also configure auxiliary hydraulic functions (such as ripper, front plow blade, etc.) without taking their hands off the controls decreasing fatigue, increasing productivity.

Emissions Technology

Reliable, integrated solutions

Cat NOx Reduction System

The Cat NOx Reduction System captures and cools a small quantity of exhaust gas, then routes it into the combustion chamber where it drives down combustion temperatures and reduces NOx emissions.

Aftertreatment Technologies

To meet Tier 4 Interim/Stage IIIB equivalent emission standards and beyond, Cat aftertreatment components have been designed to match application needs. System components include a Diesel Oxidation Catalyst (DOC), which uses a chemical process to convert regulated emissions in the exhaust system, and a Diesel Particulate Filter (DPF) that traps particulate matter that is carried into the exhaust stream.

The DOC, DPF and Cat Regeneration System are contained in a Caterpillar designed Clean Emission Module (CEM) that protects the components, minimizes the aftertreatment footprint and simplifies maintenance.

Cat Regeneration System

The Cat Regeneration System is designed to work transparently, without any interaction needed from the operator. Under most operating conditions, engine exhaust is hot enough to oxidize soot through passive regeneration. If supplemental regeneration is needed, the Cat Regeneration System elevates exhaust gas temperatures to remove soot in the Diesel Particulate Filter (DPF). This is a process that happens automatically, but the operator can initiate the cycle when convenient or interrupt regeneration as needed. A soot level monitor can be viewed on the Cat Messenger screen and regeneration indicator lights are integrated into the front console.


Power and reliability

A C7.1 ACERT engine and Cat Clean Emissions Module deliver the performance and efficiency that customers demand, while meeting Tier 4 Interim/Stage IIIB equivalent emission standards.

The C7.1 ACERT has superior torque and lugging capability to pull through sudden, short-term loads and maintain consistent, desirable grading speeds to get work done faster without downshifting. The High Pressure Common Rail Fuel System improves precision and control with full electronic injection that boosts performance and reduces soot.

Hydraulic Demand Fan

The hydraulic demand fan automatically adjusts cooling fan speed according to engine cooling requirements. This reduces demand on the engine, putting more horsepower to the ground and improves fuel efficiency. Swing-out design allows easy access to cooling cores and reduces clean out time.

Power Train

Maximum power to the ground

Automatic Differential Lock

Unlocks the differential during a turn, re-locks when straight, for easier operation and lower power train protection.

Front Axle

The Cat sealed spindle keeps bearings free from contaminants and lubricated in a light weight oil. The Cat “Live Spindle” design places the larger tapered roller bearing outboard where the load is greater, extending bearing life.

Inching Pedal

Allows precise control of machine movements and excellent modulation, critical in close-quarter work or finish grading.

Smooth Shifting Transmission

Several key innovations ensure smooth, powerful shifts.

  • Full Electronic Clutch Pressure Control (ECPC) system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
  • Controlled Throttle Shifting helps to smooth directional and gear changes without using the inching pedal.
  • Load Compensation ensures consistent shift quality regardless of blade or machine load.
  • This standard feature automatically shifts the transmission at optimal points so the operator can focus on the work to help improve safety, productivity and ease of operation.
  • Power Shift Countershaft Transmission and the Cat C7.1 engine maximize power to the ground. Eight forward/six reverse gears optimize productivity.
  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.

Bolt-On Modular Rear Axle

Improves serviceability and contamination control with easy access to differential components.

Hydraulic Brakes

Hydraulically actuated, oil bathed, multi-disc service brakes at each tandem wheel (1) offer the industry’s largest total brake surface area (2) for dependable stopping power and long brake life. The brake wear indicator/compensator system (3) maintains brake performance and indicates brake wear without disassembly, for fast servicing and longer brake service life. The spring-applied, hydraulically released multi-disc parking brake, sealed and oil-cooled for long life and low service, is integrated into the Operator Presence System to prevent unintended machine movement.

Structures and DCM

Service ease and precise blade control

Heavy Duty Durability

The frame, drawbar and one-piece forged steel circle are designed for durability in heavy duty applications. The strong A-frame drawbar uses a durable tubular design. The front 240° of circle teeth are hardened to reduce wear and ensure component reliability.

Articulation Hitch

A large tapered roller bearing at the lower pivot carries loads evenly and smoothly. Sealed to prevent contamination, a locking pin prevents articulation for safety during service or transport.

Aggressive Blade Angle

Allows material to roll more freely along the blade, particularly dry materials or cohesive soils. Better material control gets the job done faster, requires less power and saves fuel.

Fast, Easy Adjustment Means Tight Components

Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime and operating costs. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wear strips between the blade mounting group and moldboard can be replaced easily. Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter, precise blade control and dramatic reductions in service time.


Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts assure reliability and long service life. The link bar allows extreme moldboard positioning for bank sloping, ditch cutting and cleaning.

“Smart” Machine Systems

Advanced diagnostics

Sharing key data among systems helps optimize machine performance and aids serviceability.

  • Cat Messenger, combined with full systems integration, enhances diagnostic capability. Machine system errors are displayed in both text and fault codes for quick analysis of critical data.
  • Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
  • Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
  • Automatic Engine Deration protects the engine and aftertreatment by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

All-Wheel Drive (AWD)

Expanded machine versatility

All Wheel Drive (AWD)

The AWD arrangement utilizes dedicated left and right pumps for precise hydraulic control. The infinitely variable pumps and motors maximize torque in each gear. This delivers the most power to the ground in the industry and increases productivity.

Maximum Net Power

When AWD is engaged, flywheel horsepower is automatically increased up to an additional 45 kW (60 hp) from base power. This offsets the parasitic losses and maximizes net power to the ground for increased productivity.

Hydrostatic Mode

Standard with AWD, this mode disengages the transmission and provides hydraulic power to the front wheels only. The ground speed is infinitely variable between 0-8 km/h (0-5 mph), perfect for precise finish work.

Steering Compensation

Cat Steering Compensation System enables a “powered turn” by adjusting the outside front tire speed up to 50% faster than the inside tire. The result is improved control, less damage to surfaces and a dramatic reduction of turning radius in poor underfoot conditions.

Integrated Technologies

Monitor, manage, and enhance job site operations

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you’ll get more information and insight into your equipment and operations than ever before.

LINK Technologies

LINK technologies, like Product Link™, are deeply integrated into your machine and wirelessly communicates key information, including location, hours, fuel usage, idle time and event codes.

Product Link/VisionLink®

Easy access to Product Link data via the online VisionLink user interface can help you see how your machine or fleet is performing. You can use this information to make timely, fact based decisions that can boost job site efficiency and productivity, and lower costs.

GRADE Technologies

Grade technologies combine digital design data and in-cab guidance to help you reach target grade quickly and accurately, with minimal staking and checking. That means you’ll be more productive, complete jobs faster, in fewer passes, using less fuel, at a lower cost.

Cat GRADE with Cross Slope

Cat GRADE with Cross Slope is an integrated 2D system that provides automated control to one side of the blade to help operators more easily achieve accurate surface cross slope. The system calculates blade slope positioning and adjusts the left or right cylinder to achieve target slope, reducing operator inputs by up to 50%. The operator can select which side of the blade to control automatically and swap direction on the return pass without readjusting the settings. Elevation is controlled manually by matching grade or automatically by adding an elevation control device, such as a sonic or laser. The operator can monitor cross slope in real-time on the in-cab display and make quick adjustments using integrated joystick buttons while keeping hands on the controls.

Cross slope systems are ideal for maintaining accurate cross slope over long distances with greater consistency and less effort. Add AccuGrade for additional 2D and/or 3D control.

Cat AccuGrade™

The dealer-installed AccuGrade system uses a dedicated monitor with a digital design plan for 3D blade slope and elevation control. AccuGrade indicates precisely where to work and how much to cut or fill – eliminating staking and checking. Plug and play capability simplifies upgrading. Choose from sonic or laser for flat planes and slopes, and satellite (GNSS) or total station (UTS) control for large complex designs.

Stable Grade

Optional Stable Grade detects and reduces machine bounce during operation before it negatively affects the desired grade by reducing engine rpm at 15% intervals as needed to stabilize machine bounce. Once the motor grader has stabilized, Stable Grade modulates increased speed back to the set level.


Advanced machine control

Advanced Electro-Hydraulic System

Incorporates a state-of-the-art electro-hydraulic system as the foundation for revolutionary changes in machine and advanced joystick controls.

Blade Float

Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the road, especially useful when removing snow. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.

Independent Oil Supply

Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life.

Load Sensing Hydraulics (PPPC)

The proven load-sensing system and the advanced Proportional Priority Pressure-Compensating (PPPC or “triple P – C”) electro-hydraulic valves provide superior implement control and enhanced machine performance in all applications. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.

  • Consistent, Predictable Movement – PPPC valves have different flow rates for the head (red) and rod ends (blue) of the cylinder, ensuring consistent extension and retraction speeds.
  • Balanced Flow – Hydraulic flow is proportioned so all implements operate simultaneously with little effect on the engine or implement speeds.

Work Tools and Attachments

Equip your machine for the job

Moldboard Options

Standard 3.7 m (12 ft) or optional 4.3 m (14 ft). Left and right side extensions are also available.

Ground Engaging Tools (GET)

A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.

Front Mounted Groups

A front mounted push plate/counterweight or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.

Rear Ripper/Scarifier

Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.

Snow Removal Work Tools

Multiple snow plow, snow wing and mounting options increase machine versatility and utilization throughout the year.


Protect your most valuable resource

Designed with Protection in Mind

Features are designed to enhance operator and job site safety, such as drop-down rear lights and a rearview camera. Among many standard safety features are laminated glass, back-up lights, and perforated tandem walkways and grab rails.

Operator Presence System

The parking brake remains engaged and hydraulic implements disabled until the operator is initially seated and the machine is ready for operation.

Secondary Steering System

Automatically engages an electric hydraulic pump in case of a drop in steering pressure, allowing the operator to steer the machine to a stop.

Hydraulic Lockout

A simple switch located in the cab disables all implement functions while still providing machine steering control. This safety feature is especially useful while roading.

Brake Systems

Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure, further increasing operational safety.

Circle Drive Slip Clutch

This standard feature protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. It also reduces the possibility of abrupt directional changes in poor traction conditions.

Blade Lift Accumulators (Optional)

This optional feature uses accumulators to help absorb impact loads to the moldboard by allowing vertical blade travel. Blade lift accumulators help reduce unnecessary wear and also help reduce impact loading for enhanced operator safety.

Rearview Camera (Optional)

Visibility is further enhanced with an optional Work Area Vision System (WAVS) through a 178 mm (7 in) LCD color monitor in the cab. Developed specifically for rugged applications, this durable camera improves productivity and increases operator awareness of surroundings.

Front and Rear Fenders (Optional)

To help reduce objects flying from the tires, as well as build-up of mud, snow and debris, optional fenders can be added.

Customer Support

Unparalleled worldwide support

Renowned Dealer Service

From helping you choose the right machine to financing and ongoing support, your Cat dealer provides the best in sales and service.

Manage your costs with preventive maintenance programs like S∙O∙SSM analysis, Coolant Sampling and guaranteed maintenance contracts.

Stay productive with best-in-class parts availability. Your Cat dealer can even help boost your profits with operator training.

And when it’s time for component replacement, your Cat dealer can help you save even more. Genuine Cat Remanufactured parts carry the same warranty and reliability as new products at savings of 40 to 70 percent for power train and hydraulic components.


Thinking generations ahead

M Series 2 Motor Graders are designed to benefit your business and reduce emissions.

  • Cat engine and aftertreatment meet Tier 4 Interim/Stage IIIB equivalent emission standards.
  • Integrated machine systems and technologies improve productivity for greater accuracy, lower fuel use and reduced machine wear.
  • Replaceable wear parts save maintenance time and cost, and extend major component life.
  • Major structures and components are built to be rebuilt, reducing waste and replacement costs.
  • Extended service intervals reduce maintenance time/cost and waste.
  • A variety of safety features help safeguard operators and others on the job site.

Standard/Optional Features

Standard Equipment:

  • Power Train
    • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    • Air-to-air after cooler (ATAAC)
    • Belt, serpentine, automatic tensioner
    • Brakes, oil disc, four-wheel, hydraulic
    • Demand fan, hydraulic, swing-out
    • Differential lock/unlock, automatic
    • Drain, engine oil, ecology
    • Electronic over speed protection
    • Engine, C7.1 with ACERT Technology, Tier 4 Interim and Stage IIIB equivalent emission standards
    • Fuel tank, 378 L (100 gal), ground level access and sediment drain
    • Parking brake – multi-disc, sealed, oil-cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8F/6R, power shift, direct drive
    • VHP Plus (Variable Horsepower)
  • Electrical
    • Alarm, back up
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1,125 CCA
    • Breaker panel, ground accessible
    • Cab harness and electrical hydraulic valves
    • Electrical system, 24V
    • Grade Control Ready – Cab harness, software, electrical hydraulic valves, bosses and brackets
    • Lights, roof-mounted roading, reversing, LED stop and tail
    • Product Link Ready
    • Starter, electric
  • Operator Environment
    • Accelerator
    • Air conditioning with heater
    • Arm and wrist rest, electronically adjustable
    • Articulation, automatic Return-to-Center
    • Ashtray and lighter
    • Cat® Messenger operator information system
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauge, machine level
    • Gauge cluster (analog) – fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen
    • Hour meter, digital
    • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
    • Joystick, adjustable armrests
    • Joystick gear selection
    • Joystick hydraulic power steering
    • Ladders, cab, left and right side
    • Lights, night time cab
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio Ready, Entertainment
    • ROPS cab, sound suppressed 70 dB(A)
    • Seat, cloth-covered, comfort suspension
    • Seat belt, retractable 76 mm (3 in)
    • Storage area for cooler/lunchbox
    • Throttle control, electronic
    • Windows, laminated glass: – fixed front with intermittent wiper – side and rear (3)
  • Fluids
    • Antifreeze
    • Extended Life Coolant to –35° C (–30° F)
  • Tires, Rims And Wheels
    • Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
  • Other Standard Equipment
    • Accumulators, brake, dual certified
    • Anti-glare paint
    • Bumper, rear, integrated with hitch
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges: – 152 × 16 mm (6 × 5/8 in) – curved DH-2 steel – 19 mm (3/4 in) mounting bolts
    • Doors (3), engine compartment, locking
    • Drawbar – 6 shoes, replaceable wear strips
    • Electrical hydraulic valves, hydraulic lines for base 8 functions
    • Endbits: – 16 mm (5/8 in) DH-2 steel – 19 mm (3/4 in) mounting bolts
    • Fluid check, ground level
    • Frame, articulated, with safety lock
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Hydraulic lines for base functions
    • Lockout, hydraulic implement (for roading and servicing)
    • Moldboard – 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
    • Mounting, cab roof accessories
    • Pump, hydraulic, high capacity, 98 cm³ (6 in³)
    • Radiator, cleanout access (both sides with swing doors)
    • Secondary steering
    • Serviceability, LH side
    • SOSSM ports: engine, hydraulic, transmission, coolant, fuel
    • Tandem walkway/guards
    • Tool box
    • Tow hitch

Optional Equipment:

  • Electrical
    • Alternator, 280 ampere
    • Batteries: extreme duty, 1,400 CCA
    • Converter, communication (CB)
    • Lights: Headlights, high
    • Lights: Headlights, low
    • Lights: Working lights, basic
    • Lights: Working lights, plus
    • Lights: Warning: beacon or strobe
    • Lights: Mounting for warning light
  • Guards
    • Fenders, front
    • Fenders, rear
    • Sound suppression (bottom)
    • Sound suppression (enclosure)
    • Transmission
  • Operator Environment
    • Fan, defroster, rear window
    • Mirrors, outside: heated 24V
    • Mirrors, outside: mounted
    • Precleaner, HVAC
    • Radio ready, AM/FM
    • Seat, air suspension, cloth
    • Shade, sun
    • Wiper/washer, rear
  • Power Train
    • All Wheel Drive
    • Fuel tank, fast fill
    • Oil, hydraulic, biodegradable synthetic
    • Precleaner, snow
    • Starter, heavy duty, 1,000 Amp
    • Transmission, autoshift
  • Other Attachments
    • AccuGrade ARO
    • Accumulators, blade lift
    • Camera, rearview
    • Cat Product Link 321SR
    • Drain, ecology, engine Wiggins
    • Fenders, front, AWD
    • Fenders, rear
    • Heater, engine coolant: 120V
    • Heater, engine coolant: 240V
    • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
    • Snow wing mounting, frame ready
    • Sound suppression
    • Starting aid, ether
  • Work Tools/g.e.t.
    • Blade extension, left hand, 610 mm (2 ft)
    • Cutting edges, curved
    • Endbits, overlay
    • Front lift group, mounting
    • Front lift group, mechanical
    • Grader bit, narrow and super penetration
    • Mid-Mount Scarifier, Package
    • Mid-Mount Scarifier, Mounting
    • Moldboard: 4267 mm × 610 mm × 22 mm (14 ft × 24 in × 7/8 in)
    • Moldboard: 4267 mm × 686 mm × 25 mm (14 ft × 27 in × 1 in)
    • Push plate, counterweight
    • Ripper, mounting
    • Ripper, rear
    • Ripper tooth
    • Scarifier, front
    • Snow Arrangement
    • Snow Wing Ready Package
  • Machine Arrangements
    • Canadian Arrangement
    • European Arrangement
    • European Roading Arrangement