950M Wheel Loader

The new 950M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.

Request a Quote
Net Power - ISO 9249
230 hp
Operating Weight
42357 lb
Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)
Engine Model
Cat C7.1 ACERT

Product Specs

Engine

Net Power - ISO 9249
230hp
Engine Model
Cat C7.1 ACERT
Maximum Power @ 2,100 rpm – SAE J1995
250hp
Maximum Power @ 2,100 rpm – ISO 14396
249hp
Displacement
428in3
Maximum Power @ 2,100 rpm – ISO 14396 (metric)
253hp
Maximum Net Power @ 2,100 rpm – SAE J1349
230hp
Maximum Net Power @ 2,100 rpm – ISO 9249
230hp
Maximum Net Power @ 2,100 rpm – ISO 9249 (metric)
232hp
Peak Gross Torque (1,300 rpm) – SAE J1995
911lbf-ft
Peak Gross Torque (1,300 rpm) – ISO 14396
908lbf-ft
Maximum Net Torque (1,300 rpm)
858lbf-ft
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Weights

Operating Weight
42357lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Transmission

Forward 1
4.3mph
Forward 2
7.5mph
Forward 3
12.0mph
Forward 4
16.0mph
Reverse 1
4.3mph
Reverse 2
7.5mph
Reverse 3
16.0mph
Forward 5
24.5mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Service Refill Capacities

Cooling System
15.6gal
Crankcase
5.8gal
Transmission
11.4gal
Differentials and Final Drives – Front
11.4gal
Differentials and Final Drives – Rear
11.4gal
Hydraulic Tank
33.0gal
DEF Tank
4.2gal
Fuel Tank
72.6gal

Operating Specifications

Breakout Force
40690lbf
Static Tipping Load – Full 40° Turn – No Tire Deflection
25926lb
Static Tipping Load – Full 40° Turn – with Tire Deflection
24262lb
Note
For a machine configuration as defined under “Weight.”
Note
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Hydraulic System

Hydraulic Cycle Time – Total
8.9Seconds
Implement Pump Type
Variable Axial Piston
Implement System: Maximum Pump Output (2,150 rpm)
76gal/min
Implement System: Maximum Operating Pressure
4250psi

Sound

With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value**: Operator Sound Pressure Level (ISO 6396:2008)
69dB(A)
With Cooling Fan Speed at 70% of Maximum Value**: Exterior Sound Power Level (ISO 6395:2008)
104 LWA***
Note
**For machines in European Union countries and in countries that adopt the “EU Directives.”
Note
***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions – Standard Lift

Height to Top of Hood
8.83ft
Height to Top of Exhaust Pipe
11.17ft
Height to Top of ROPS
11.33ft
Ground Clearance
1.17ft
Center Line of Rear Axle to Edge of Counterweight
6.33ft
Center Line of Rear Axle to Hitch
5.50ft
Wheelbase
11.00ft
Overall Length (without bucket)
22.67ft
Hinge Pin Height at Carry Height
2.08ft
Hinge Pin Height at Maximum Lift
13.25ft
Lift Arm Clearance at Maximum Lift
10.75ft
Rack Back at Maximum Lift
59 degrees
Rack Back at Carry Height
49 degrees
Rack Back at Ground
36 degrees
Maximum Width over Tires (loaded)
9.25ft
Tread Width
7.00ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions – High Lift

Height to Top of Hood
8.83ft
Height to Top of Exhaust Pipe
11.17ft
Height to Top of ROPS
11.33ft
Ground Clearance
1.17ft
Center Line of Rear Axle to Edge of Counterweight
6.33ft
Center Line of Rear Axle to Hitch
5.50ft
Wheelbase
11.00ft
Overall Length (without bucket)
24.58ft
Hinge Pin Height at Carry Height
2.58ft
Hinge Pin Height at Maximum Lift
14.83ft
Lift Arm Clearance at Maximum Lift
11.92ft
Rack Back at Maximum Lift
59 degrees
Rack Back at Carry Height
49 degrees
Rack Back at Ground
40 degrees
Maximum Width over Tires (loaded)
9.25ft
Tread Width
7.00ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.