770 Off-Highway Truck

Overview

Cat’s 770 40-ton payload sets the standard for haul performance in construction and quarry industries. We’ve taken the best of our rugged, dependable Off-Highway Truck lineup and integrated it with technologies that help our environment, make operators more productive, and dramatically improve the economics of haul fleets. An optimal pass match for the 770 is the Cat 986K or 988K Wheel Loader or the 374F or 390F Hydraulic Excavators. No matter your business type, the 770 is designed to help you move materials safely and efficiently through every haul.

ACHIEVE GREATER PRODUCTIVITY
ACHIEVE GREATER PRODUCTIVITY
        
  • Haul your materials faster with an accelerated travel speed.
  •     
  • Put more power to the ground with increased torque.
  •     
  • Enjoy greater productivity while using a more responsive Traction
    Control System (TCS).
BOOST FUEL EFFICIENCY
BOOST FUEL EFFICIENCY
        
  • Up to 11% less fuel consumption.
  •     
  • Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
DESIGNED FOR SAFETY
DESIGNED FOR SAFETY
        
  • Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
  •     
  • Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
  •     
  • Superior brake performance meets the latest brake standards—
        ISO 3450:2011.
WORK IN COMFORT
WORK IN COMFORT
        
  • Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
  •     
  • The new operator seat placement provides easier operation and comfort to the operator.
  •     
  • Improvements in enlarged views of the work area and its surroundings.
TECHNOLOGY THAT GETS WORK DONE
TECHNOLOGY THAT GETS WORK DONE
        
  • Integrated systems give you the ability to make timely, fact-based 
    decisions to maximize efficiency, improve productivity, and lower
    costs.
  •     
  • Gain valuable insight into how your machine is performing by continuously
     monitoring and collecting vital machine data via the advisor display with the software Vital Information Management System (VIMS™).  Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
REDUCED MAINTENANCE COST AND OTHER COSTS
REDUCED MAINTENANCE COST AND OTHER COSTS • Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
...
APPLICATION VERSATILITY
APPLICATION VERSATILITY
        
  • Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
  •     
  • For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
  •     
  • The flat floor body is perfect for metering material, especially when
        feeding the crusher. 
ACHIEVE GREATER PRODUCTIVITY
ACHIEVE GREATER PRODUCTIVITY
        
  • Haul your materials faster with an accelerated travel speed.
  •     
  • Put more power to the ground with increased torque.
  •     
  • Enjoy greater productivity while using a more responsive Traction
    Control System (TCS).
  •     
  • Reduce tire wear with maximum by engaging TCS early in the slip.
  •     
  • Strong, predictable performance helps operators achieve the lowest cost per ton.
BOOST FUEL EFFICIENCY
BOOST FUEL EFFICIENCY
        
  • Up to 11% less fuel consumption.
  •     
  • Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
  •     
  • Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
  •     
  • Gain improvements in fuel efficiency with auto-neutral idle.
  •     
  • Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
  •     
  • Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.







DESIGNED FOR SAFETY
DESIGNED FOR SAFETY
        
  • Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
  •     
  • Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
  •     
  • Superior brake performance meets the latest brake standards—
        ISO 3450:2011.
  •     
  • The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
  •     
  • Sturdy 4-point mounted cabin meets rollover protective structure/
        falling objects protective structure (ROPS/FOPS) standard.
  •     
  • 4-point seat belt provides enhanced safety to the operator.
  •     
  • Seat belt indicator implements both visual and audible alerts to the
        operator when seat belt is not fastened.
  •     
  • Lockout features help the service technician to perform
        maintenance work on the machine with safe mode.
  •     
  • Secondary steering activates automatically in case of primary
        system failure.
  •     
  • Overload speed limiter works with truck payload system to reduce
        machine speed automatically when the truck is overloaded. 


















WORK IN COMFORT
WORK IN COMFORT
        
  • Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
  •     
  • The new operator seat placement provides easier operation and comfort to the operator.
  •     
  • Improvements in enlarged views of the work area and its surroundings.
  •     
  • Access connectivity and decrease clutter with more storage areas in the newly designed cab.
  •     
  • Automatic cab temperature controls.
  •     
  • Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE
TECHNOLOGY THAT GETS WORK DONE
        
  • Integrated systems give you the ability to make timely, fact-based 
    decisions to maximize efficiency, improve productivity, and lower
    costs.
  •     
  • Gain valuable insight into how your machine is performing by continuously
     monitoring and collecting vital machine data via the advisor display with the software Vital Information Management System (VIMS™).  Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
  •     
  • Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
  •     
  • External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
  •     
  • Product Link™ system connects to each machine wirelessly, 
    allowing you to monitor location, hours, fuel use, productivity, idle
    time, and diagnostic codes.
  •     
  • VisionLink®
    wirelessly connects you to your equipment, giving
    you access to essential information you need to know to run your business.
  •     
  • The Cat 770 is MineStar™ ready and includes Cat Product Link
    Elite and VIMS to help optimize equipment management, remote
    monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic 
    failure.
  •     
  • Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life. 






REDUCED MAINTENANCE COST AND OTHER COSTS
REDUCED MAINTENANCE COST AND OTHER COSTS • Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage. 




APPLICATION VERSATILITY
APPLICATION VERSATILITY
        
  • Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
  •     
  • For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
  •     
  • The flat floor body is perfect for metering material, especially when
        feeding the crusher. 
  •     
  • Optimize your body life by selecting a liner package best suited
        for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications. 

Engine

Engine Model
Cat® C15
Rated Engine Speed
1700r/min
Gross Power - SAE J1995
515HP
Net Power - SAE J1349
477HP
Net Power - ISO 9249
477HP
Net Power - 80/1269/EEC
489HP
Net Power - ISO 14396
508HP
Net Torque - SAE J1349
1834ft·lbf
Number of Cylinders
6
Bore
5.4in
Stroke
6.7in
Displacement
927.6in³
Emissions
Meets U.S. EPA Tier 4 and EU Stage V emission standards.
Note (1)
Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)
No engine derating required up to 3000 m (9,843 ft) altitude.
Note (4)
Meets Japan Small Volume Exemption.

Weights - Approximate

Target Gross Machine Operating Weight
157000lb
Target Gross Machine Weight
157000lb
Chassis Weight
55948lb
Body Weight
17306lb
Note (1)
Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
Note (2)
Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.

Operating Specifications

Nominal Payload Class (100%)
42.1ton (US)
Top Speed - Loaded
45.8mile/h
Target Payload (100%)
42.1ton (US)
Maximum Working Payload (110%)
46.3ton (US)
Maximum Allowable Payload (120%)*
50.5ton (US)
Body Capacity - SAE 2:1
32.9yd³
Note (1)
*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note (2)
Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.

Transmission

Forward - 1
7.4mile/h
Forward - 2
10.1mile/h
Forward - 3
13.8mile/h
Forward - 4
18.5mile/h
Forward - 5
25.1mile/h
Forward - 6
33.8mile/h
Forward - 7
45.8mile/h
Reverse
8.8mile/h
Note
Maximum travel speeds with standard 18.00R33 (E4) tires.

Final Drives

Differential Ratio
1.92:1
Planetary Ratio
4.80:1
Total Reduction Ratio
9.26:1

Brakes

Brake Surface - Front
216in²
Brake Surface - Rear
6235in²
Brake Standards
ISO 3450:2011
Note
Target gross machine operating weight is 71 214 kg (157,000 lb).

Body Hoists

Pump Flow - High Idle
118gal/min
Relief Valve Setting - Raise
2750psi
Relief Valve Setting - Lower
500psi
Body Raise Time - High Idle
7.5s
Body Lower Time - Float
10s
Body Power Down - High Idle
10s

Capacity - Dual Slope - 100% Fill Factor

Struck
23.01yd³
Heaped (SAE 2:1)*
32.9yd³
Note (2)
*ISO 6483:1980.
Note (1)
Contact your local Cat dealer for body recommendation.

Capacity - Flat Floor - 100% Fill Factor

Struck
23.01yd³
Heaped (SAE 2:1)*
32.9yd³
Note (1)
Contact your local Cat dealer for body recommendation.
Note (2)
*ISO 6483:1980.

Weight Distributions - Approximate

Front Axle - Empty
49%
Front Axle - Loaded
34%
Rear Axle - Empty
51%
Rear Axle - Loaded
66%

Suspension

Empty Loaded Cylinder Stroke Front
9.2in
Empty Loaded Cylinder Stroke Rear
5.9in
Rear axle - Oscillation
8.9°

Service Refill Capacities

Fuel Tank
140gal (US)
Cooling System
33gal (US)
Crankcase
17gal (US)
Differential - Final Drives
47gal (US)
Steering Tank
14.5gal (US)
Steering System - Including Tank
23gal (US)
Brake/Hoist Hydraulic Tank
38gal (US)
Brake Hoist System
60gal (US)
Torque Converter - Transmission System
17gal (US)
DEF Tank
6gal (US)

Tires

Standard Tire
18.00R33 (E4)
Note (1)
Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)
Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.

ROPS

ROPS Standards
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards
Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.

Sound

Sound Standards (1)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Standards (2)
Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).
Sound Standards (3)
Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.

Steering

Steering Standards
ISO 5010:2007
Steer Angle
40.5°
Turning Diameter - Front
57.7ft
Turning Circle - Clearance Diameter
66.6ft
Note
Target gross machine operating weight is 71 214 kg (157,000 lb).

Dimensions

Height - Top of ROPS
12.7ft
Overall Body Length
26.8ft
Inside Body Length
18.5ft
Overall Length
28.9ft
Wheel Base
13ft
Rear Axle - Tail
8.5ft
Ground Clearance
1.6ft
Dump Clearance
1.7ft
Loading Height - Empty
10.3ft
Inside Body Depth - Maximum
4.6ft
Overall Height - Body Raised
27.1ft
Operating Width
15.7ft
Centerline Front Tire Width
10.2ft
Engine Guard Clearance
1.8ft
Outside Body Width
12.9ft
Inside Body Width
11.9ft
Front Canopy Height
13.5ft
Rear Axle - Clearance
1.8ft
Centerline of Rear Dual Tire Width
8.3ft
Overall Tire Width
12.1ft

Standard/Optional Features

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alarm, backup
    • Alternator, 115 ampere
    • Auxiliary jump start receptacle
    • Batteries, maintenance-free, 12V (2), 190 amp-hour
    • Electrical system, 24V
    • Lighting system:
      – Backup light (halogen)
      – Directional signals/hazard warning (front and rear LED)
      – Headlights, (halogen) with dimmer
      – Operator access courtesy lights (Developing Market Only)
  • Product Link Communications
    • Product Link Ready
  • Guards
    • Driveline
    • Engine crankcase
  • Operator Environment
    • Air conditioning
    • Ashtray and cigarette lighter
    • Coat hook
    • Cup holders (4)
    • Diagnostic connection port, 24V
    • Entertainment Radio Ready:
      – 5 amp converter
      – Speakers
      – Antenna
      – Wiring harness
    • Gauges/indicators:
      – Air cleaner service indicator - electronic
      – Brake oil temperature gauge
      – Coolant temperature gauge
      – Hour meter
      – Tachometer
      – Engine overspeed indicator
      – Fuel level
      – Speedometer with odometer
      – Transmission gear indicator
    • Heater/defroster (11 070 kCal/43,930 BTU)
    • Hoist lever
    • Horn, electric
    • Light - dome
    • Light - courtesy
    • Messenger, display unit
    • Mirrors
    • Power port, 12V
    • ROPS cab, insulated/sound suppressed
    • Seat, Cat Comfort Series III:
      – full air suspension
      – four-point harness
    • Steering wheel, padded, tilt and telescopic
    • Storage compartment
    • Sun visor, tinted glass
    • Throttle lock
    • Windshield wiper (intermittent) and washer
  • Power Train
    • Air-To-Air Aftercooler (ATAAC)
    • Air cleaner with precleaner (1)
    • Automatic cold mode idle control
    • Electric start
    • Turbocharger
    • Braking system, hydraulic actuated:
      – Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes)
      – Brake release motor (towing)
      – Caliper-disc (front)
      – Extended Life Brakes
      – Oil-cooled, multiple disc (rear)
      – Parking
      – Secondary
      – Service
    • Transmission:
      – 7-speed automatic powershift
      – Body up-shift inhibitor
      – Controlled throttle shifting
      – Directional shift management
      – Downshift inhibitor
      – Neutral start switch
      – Neutral coast inhibitor
      – Reverse shift inhibitor
      – Reverse neutralizer during dumping
      – Programmable top gear selection
  • Suspension Systems
    • Suspension, front and rear
  • Other Standard Equipment
    • Body safety pin (secures body in up position)
    • Body down indicator
    • CD-ROM parts book
    • Fan, hydraulic demand
    • Fuel tank (530 L/140 gal)
    • Guard, engine compartment
    • Guard, mud
    • Ground level battery disconnect
    • Ground level engine shutdown
    • Ground level grease fittings
    • Reservoirs (separate):
      – Brake/converter/hoist
      – Steering
      – Transmission/torque converter
    • Rims 15 × 33
    • Rock ejectors
    • Service platform, left and right side
    • Supplemental steering (automatic)
    • Tie down eyes
    • Tow hooks (front)/Tow pin (rear)
    • Vandalism protection locks
  • Antifreeze
    • Extended Life Coolant to -35° C (-30° F)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Optional Equipment
    • Cat Engine Brake
    • Extended Life Brake Discs
    • Body heat/diverter box
    • Four (4) batteries
    • HID lights
    • Product Link
    • Backup alarm
    • Heated mirrors
    • Fuel heater
    • Ether aid
    • Coolant heater
    • Auto lube
    • Rear vision camera (WAVS)
    • Spare rims
    • Wheel chocks
    • Body sideboards
    • Traction Control System (TCS)

Take The Virtual Product Tour To Explore The Features And Benefits of the 770 Off-Highway Truck

See how 770 (07) compares against frequently compared products

770 (07) Off-Highway Trucks

Engine Model
Cat® C15
Rated Engine Speed
1700 r/min
Gross Power - SAE J1995
515 HP
Selected Model

770 (07) Off-Highway Trucks

Engine Model
Cat® C15
Rated Engine Speed
1700 r/min
Gross Power - SAE J1995
515 HP
View Full Specs

775 (07) Off-Highway Trucks

Engine Model
Cat® C15
Rated Engine Speed
1700 r/min
Gross Power - SAE J1995
515 HP
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »