A68 Auger

Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.

Request a Quote

Product Specs

Dimensions

Drive Shaft Torque @ Max Pressure
5040lb ft
Drive Method
Gerotor Motor - Double Planetary Reduction
Mounting Bracket Design
Mini Hydraulic Excavator
Required Hydraulics
High Flow XPS
Overall Width w/ bracket
11in
Overall Length w/ bracket
14in
Overall Drive Unit Height
36in
Housing Diameter
11in
Swing Range (fore/aft)
60 degrees
Swing Range (L/R)
76 degrees
Hex Output Shaft Size
2in
Drive Unit Weight (w/o Bits)
234lb
Required Hydraulic Flow
95-130 L/min (25-34 gpm)
Optimal Hydraulic Pressure
207-290 bar (3002-4206 psi)
Effective Displacement
2.67in³
Bit Speed at Maximum Flow
81 rpm
Hex Output Shaft Size
2in
Drive Shaft Torque at Maximum Pressure
5034.6lb/ft
Drive Method
Gerotor Motor - Double Planetary Reduction
Mounting Bracket Design
5 Ton Mini Excavator Pin On
Drive Gear Reduction
34:1
Optimal Hydraulic Pressure
207-290 bar (3002-4206 psi)
Overall Width - With Bracket
11.4in
Required Hydraulic Flow
95-130 L/min (25-34 gpm)
Required Hydraulics
High Flow XPS
Overall Length - With Bracket
14.2in
Swing Range (L/R)
76 degrees
Optimal Hydraulic Flow
95-130 L/min (25-34 gpm)
Overall Height
36.1in
Weight
233.7lb
Motor Displacement
2.67in³

Standard/Optional Features

Standard Equipment:

Optional Equipment:

  • Buckets
    • Wide: 4.2 m3 (5.5 yd3), Performance Series
Translate »