; TRS6 S40 Coupler/S40 Coupler Tiltrotator For 5-6 Ton Mini Excavators - H.O. Penn

TRS6 S40 Coupler/S40 Coupler Tiltrotator For 5-6 Ton Mini Excavators

masthead-innerpage-bg

TRS6 S40 Coupler/S40 Coupler Tiltrotator For 5-6 Ton Mini Excavators

Overview

Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

https://s7d2.scene7.com/is/image/Caterpillar/CM20220613-2ad52-5f08a

Provides optimal control of your work tools to provide greater flexibility.
https://s7d2.scene7.com/is/image/Caterpillar/CM20200213-1958d-8198d

A single point of entry for grease allows the entire unit to be greased quickly and easily.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190829-88ea3-885c2

Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190423-3426d-195f8

A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190308-25183-02210

Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
https://s7d2.scene7.com/is/image/Caterpillar/CM20200213-8b832-b09a2

Valves sustain holding pressures and prevent cylinder movement under load constraints.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190308-25183-21663

The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190308-25183-52489

Used to pick up objects such as pipe and debris.
https://s7d2.scene7.com/is/image/Caterpillar/CM20200526-7750c-e97a1

LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Machine Class
6 Ton Mini Excavators
Weight
463lb
Interface Options: Top-Bottom
S-40 / S-40
Overall Height
32.2in
Length
20.7in
Overall Width
19.3in
Rotation Speed
7 Seconds per 1 Full Rotation
Tilt Angle Range +/-
40 degrees left/right
Maximum Bucket Capacity
8.8ft³
Maximum Bucket Width
47.2in
Optimal Hydraulic Flow
45-80 L/min (12-21 gpm)
Maximum Operating Pressure
3625.9psi
Required Hydraulics
1st Auxiliary
Tilting Torque
10627lb/ft
Turning Torque
2876.5lb/ft
Compatibility
Only compatible with the following Mini Excavator model serial number prefixes: 306 CR (6G6 1 & up)

Take the virtual product tour

Explore the features and Benefits
of the TRS6 S40 Coupler/S40 Coupler Tiltrotator For 5-6 Ton Mini Excavators

Compare products

See how TRS6 S40 Coupler/S40 Coupler Tiltrotator For 5-6 Ton Mini Excavators compares against frequently compared products

Compare our equipment

Translate »