AP1055F Paver

AP1055F Mobil-Trac Paver

Overview

The AP1055F is a high-production rubber track paver that excels on airports runways, interstates, highways, and other large jobsites. Its high travel speed, flotation, and traction deliver superb mobility.

Fuel Efficient and Quiet
Cat C7.1 Engine The C7.1 engine provides 168 kW (225 hp) and meets U.S. EPA Tier 4 Final and EU Stage IV emmision standards.
Quick Starter
Quiet Heating Quiet heat mode operates at an engine speed of 1300 rpm and provides screed plate heating in under 15 minutes.
More Control
Better Visibility, Exceptional Comfort The dual independent operating stations can extend beyond the frame for good all-around visibility. The low profile, front-mounted cooling system improves forward viewing and the redesigned auger assembly optimizes visibility to material height in front of the screed. The heated seat option, multipl...
Water Resistant Displays
Single Touch Operation Single touch features for the auto-fill feeder system, feeder system activation, and hopper control, allow operators to concentrate on truck exchanges and other duties for improved efficiency.
More Efficient Delivery
Auto-Fill Feeder System The auto fill feeder system simplifies starts by alternating the conveyors and augers until the mix height reaches the sensor set point, eliminating manual activation and constant monitoring.
Mobil-Trac Undercarriage
Performance The Mobil-Trac undercarriage minimizes tow-point movement. The front and rear bogie sets crawl over obstacles and help maintain ground contact. The smooth belt option performs well on soft base materials and fresh mats. The tread-bar design excels on loose paving/transport conditions.
SE60-Series Screeds
Screed Heat Technology Exclusive zone monitoring allows heating to continue in the event of a temperature sensor failure. The system also monitors heating elements for failure conditions, eliminating unnecessary replacement.
Cat Grade Control
Easy Operation F-Series pavers allow Cat Grade Control to be operated from any of the two tractor or two screed consoles. Split screen mode can be setup to monitor each side of the screed allowing single person operation.
Fuel Efficient and Quiet
Cat C7.1 Engine The C7.1 engine provides 168 kW (225 hp) and meets U.S. EPA Tier 4 Final and EU Stage IV emmision standards.
Eco-mode Eco-mode utilizes an engine speed of 1650 rpm and reduces fuel burn by up to 5% over Cat E-series pavers while also lowering sound levels even more.
Automatic Engine Speed Control When automatic engine speed control is activated, the engine speed is reduced to an idle speed of 1000 rpm when the propel lever is moved to neutral or to 1300 rpm when screed heat is active.
Advanced Eco-mode Eco-mode and automatic engine speed control when activated together modify the engine rpm based on load factors. When activated the engine will operate at 1650 rpm when paving. If the upper power threshold is exceeded, the engine speed will increase to 2200 rpm and remain there until the demand drops below the threshold and remains there for 30 seconds, ensuring reliable performance.
Quick Starter
Quiet Heating Quiet heat mode operates at an engine speed of 1300 rpm and provides screed plate heating in under 15 minutes.
Quick Heating Quick heating mode provides a heat-up time in under 35 minutes when equipped with the 10 m (33 ft) wide-width paving package.
Temperature Ranges Three preset heating options provide a wide range of temperatures for various mix designs; Low is 110 degrees C or 230 degrees F, medium is 130 degrees C or 266 degrees F, high is 160 degrees C or 320 degrees F.
More Control
Better Visibility, Exceptional Comfort The dual independent operating stations can extend beyond the frame for good all-around visibility. The low profile, front-mounted cooling system improves forward viewing and the redesigned auger assembly optimizes visibility to material height in front of the screed. The heated seat option, multiple seat adjustments, and tilting consoles conform to the operator to provide day-long comfort. The top-mounted cooling system directs fumes, hot air, and fan noise away from the crew for a cooler and quieter working environment.
Fumes Management The exclusive ventilation system draws fumes from the conveyor tunnel as well as the auger chamber and redirects them away from the operator for a more comfortable working environment.
Water Resistant Displays
Single Touch Operation Single touch features for the auto-fill feeder system, feeder system activation, and hopper control, allow operators to concentrate on truck exchanges and other duties for improved efficiency.
Simple Technology Technology helps operators perform. Intuitive symbols and large graphics simplify operation, while the interactive LCD display with touchscreen access to generator activation, screed temperature control, and mix height adjustment, increase efficiency.
More Efficient Delivery
Auto-Fill Feeder System The auto fill feeder system simplifies starts by alternating the conveyors and augers until the mix height reaches the sensor set point, eliminating manual activation and constant monitoring.
Single Touch Feeder System The two augers and two conveyors can be activated automatically with a single button, simplifying setup. Each auger and each conveyor can still be operated independently when needed.
One Touch Hopper Control The hopper wings and hydraulic apron can be folded with a single touch and release. The system can be tailored to activate left or right wings, or the front hydraulic apron independently or together.
Cleanout and Warm-Up Mode This feature activates the augers, conveyors, and tamper-bar (if equipped) at a reduced speed, allowing the application of release agents to prevent material build-up.
Mix Height Adjustment Mix height adjustment in front of the screed can be modified from the tractor LCD display for increased versatility when needed.
Hydraulic Mainframe Extensions The optional 457 mm (18") hydraulic mainframe extensions attach to the auger assembly and provide smooth material flow out to the extenders. They retract with the screed extensions when reducing paving widths.
Multiple Feed Sensor Options The feeder system can be tailored to automatically operate with 0, 2, or 4 feeder sensors. When paving with 0 sensors due to a failure, simply set the feeder system to automatic and adjust the mix height setting, no need to cycle the manual switch as previous models required.
Easier Service Hardware-free bed plates simplifies replacement and bottom side mounting hardware for the chain gaurds eliminates bolt wear and material build-up for easier replacement.
Mobil-Trac Undercarriage
Performance The Mobil-Trac undercarriage minimizes tow-point movement. The front and rear bogie sets crawl over obstacles and help maintain ground contact. The smooth belt option performs well on soft base materials and fresh mats. The tread-bar design excels on loose paving/transport conditions.
Durability Self-tensioning accumulators, center guide blocks, and rugged internal belt cables ensure durability. The components are rubber coated in order to shed asphalt and prevent accumulation.
SE60-Series Screeds
Screed Heat Technology Exclusive zone monitoring allows heating to continue in the event of a temperature sensor failure. The system also monitors heating elements for failure conditions, eliminating unnecessary replacement.
Easy Adjustment Feeder system ratio adjustment capability from the screed provides versatility. Standard hydraulic adjustment for extender height, slope, and crown, allows for on-the-go adjustment at standard and maximum paving widths.
Two-Speed Proportional Extender Control Exclusive two-speed proportional extender control offers slower speed for precise control around obstacles and quick reaction when extending paving widths.
Simple Replacement The heating elements slide out for easy replacement, no need to remove the screed plates. Machined screed frames simplify plate replacement and leveling.
Tamper Bar Screed Option Tamper bar equipped screeds increase density as it tucks material under the screed plates. Three stroke settings of 2, 4, and 7 mm provide versatility and has a variable tamper speed of 0 to 1800 rpm.
Wide-Width Paving Packages Exclusive power controls simplify adjustment across the entire 10 m (33 ft 4 in) paving width for better mat texture and quality. An innovative hooking system utilizes extender slope to attach wide-width paving packages, eliminating the need for other lifting devices.
Cat Grade Control
Easy Operation F-Series pavers allow Cat Grade Control to be operated from any of the two tractor or two screed consoles. Split screen mode can be setup to monitor each side of the screed allowing single person operation.
Precise Control More accurate control maximizes mix utilization and saves money. True averaging with sonic sensors that utilize 5 transducers, 2 readings are discarded and 3 averaged. A 10-point Auto-Calibration eliminates over/under adjustment from a single calibration point. Cross-coupling, slope and elevation are maintained with height adjustments. The true 9 m (30 ft) sonic averaging beam modifies tow point movement by 1/3 of total grade deviation.
Highly Reliable Water-resistant displays, factory installed components, and consistent routing deliver performance. Sealed components withstand heat, moisture, and vibration, while the built-in temperature sensors provide better reliability than bail-type sensors.

Dimensions

Transport Height - Without Canopy
10.45ft
Operating Length - With SE60 V XW, VT XW Screeds
23.1ft
Operating Length - With SE60 V Screed
22.5ft
Transport Length - With SE60 XW-Series
22.7ft
Transport Length - With SE60 V Screed
20ft
Truck Entry Height - With Standard Entry Hopper
22.5in
Truck Entry Height - With Low Entry Hopper
20.5in
Transport Width - With Screed End Gates
10.66ft
Transport Width - With End Gates Folded
9.83ft
Operating Height - With Canopy
157in
Operating Width - Low Entry Hopper
142in
Operating Height - Without Canopy
146in
Operating Width - Standard Entry Hopper
132in
Transport Height - Canopy Retracted
10.5ft

Weights

Tractor Operating Weight
37553lb
Operating Weight - With SE60 V
45090lb
Operating Weight - With SE60 V XW
46580lb
Tractor Shipping Weight
36804lb
Operating Weight - With SE60 VT XW
48320lb

Operating Specifications

Maximum Paving Width - SE60 V Screed
25ft
Maximum Paving Speed - With Vibratory Screed
210ft/min
Maximum Paving Speed - With Tamper Bar Screed
82ft/min
Hopper Capacity - Standard Entry
267ft³
Inside Turn Radius
1.5ft
Maximum Travel Speed
9mile/h
Standard Paving Range
3 - 6 m (9' 10"-19' 6")
Maximum Throughput Capacity
1766tonnes/hr
Hopper Capacity - Low Entry Hopper
286ft³
Maximum Paving Width - SE60 V XW, VT XW Screeds
33ft

Service Refill Capacities

DEF Tank
5gal (US)
Fuel Tank Capacity
92gal (US)

Engine

Engine Model
Cat C7.1 with ACERT
Gross Power
225HP

Standard/Optional Features

Standard Equipment:

Optional Equipment:

  • Options
    • Air-ride Seat with Heat
    • Auger and Mainframe Extensions
    • Auxiliary Power Panel
    • Ballast
    • Cat Grade Control
    • Decelerator Pedals
    • Ecological Washdown System
    • Feed Sensor (Sonic or Mechanical)
    • Friction Steering
    • Hardtop Canopy
    • HID Lights
    • Leveling Devices
    • Lights (Working or Roading)
    • Mainframe Extensions (Power or Manual)
    • Oscillating Push Rollers
    • Power Folding Front Apron
    • Product Link
    • Smooth or Treadbar Belt
    • Steering Guide
    • Tow Point Indicators (Upper)
    • Track Plow
    • Truck Hitch
    • Generator
    • Umbrella
    • Uptime Kit
    • Ventilation System
    • Warning Beacon
    • Wide-width Paving Packages
    • Windshield w/Hardtop Canopy
  • Grade References
    • Non-Contacting Sonic Grade Sensor
    • Contacting Grade Sensor
    • Outboard Leveler, 9.15 m (30') and 12.2 m (40')
    • Inboard Leveler
    • Mobile Stringline
    • Fore ‘N Aft Leveler
    • Sonic Averaging Beam
    • Rigid Ski, 9.15 m (30') and 12.2 m (40')
  • Screed Choices
    • SE60 V Vibratory Screed
    • SE60 V XW Vibratory Screed
    • SE60 VT XW Vibratory and Tamper Bar Screed

Take The Virtual Product Tour To Explore The Features And Benefits of the AP1055F Mobil-Trac Paver

See how AP1055F compares against frequently compared products

AP1055F Asphalt Pavers

Transport Height - Without Canopy
10.45 ft
Operating Length - With SE60 V XW, VT XW Screeds
23.1 ft
Tractor Operating Weight
37553 lb
Selected Model

AP555F Asphalt Pavers

Transport Height - Without Canopy
10.45 ft
Operating Length - With SE60 V XW, VT XW Screeds
23.1 ft
Tractor Operating Weight
37553 lb
View Full Specs

AP355F Paver Asphalt Pavers

Transport Height - Without Canopy
10.45 ft
Operating Length - With SE60 V XW, VT XW Screeds
23.1 ft
Tractor Operating Weight
37553 lb
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials