AP355F Paver
Asphalt Pavers
Track Asphalt Pavers (9)
-
AP255E Paver
-
AP1055F Mobil-Trac Paver
-
AP655F Mobil-Trac Paver
-
AP555F Mobil-Trac Paver
-
AP1055 Mobil-Trac Paver
-
AP655 Mobil-Trac Paver
-
AP455
-
AP555
-
AP355F Paver
Wheel Asphalt Pavers (8)
-
AP600F Wheel Paver
-
AP1000F Wheel Paver
-
AP500F Wheel Paver
-
AP1000 Wheel Paver
-
AP600 Wheel Paver
-
AP500
-
AP400
-
AP300F
Screeds (1)
Overview
The AP355F paver combines excellent styling with technology that exemplifies comfort and productivity. Numerous technological enhancements help contractors navigate around the twists and turns of urban environments and mountain roads.
- High Efficiency Powertrain
- More Traction
- Automation Enhances Material Flow
- Technology Enhancements
- Advanced Control
- Cleanout and Warm-Up Mode
- Comfort and Visibility
- Electric Heat
- Tamper Bar Screed
- Quick Change Heating Elements
High Efficiency Powertrain
- Advanced Eco-mode modifies engine speed to save fuel and reduce sound levels, leading to lower operating costs and better work site communication.
- Three steering/travel modes provide alternative control options for paving, traveling, and maneuvering around the job site.
- Pave mode enables a paving speed up to 64 mpm (210 fpm), while travel mode offers a quick speed of 11 kph (7 mph).
More Traction
- The Mobil-Trac Undercarriage combines the speed of a wheel paver with the traction and flotation of a track paver.
- This system is equipped with oscillating bogie sets that help the Mobil-trac maintain contact with the surface regardless of irregularities.
- Grade deviations and and tow point movement are minimized due to the smooth motion of these bogie sets, resulting in smoother paving results.
Automation Enhances Material Flow
- Consistent paving starts can lead to smoother pavement. At the beginning of each pass, the auto-fill material feed system activates the augers and conveyors and moves material across the face of the screed until the material reaches the set points of the feed sensors.
- This consistency allows the operators to quickly fine tune the feeder system speeds for smooth material flow in front of the screed.
Technology Enhancements
- Technology enhancements optimize operator performance.
- The material feed system can be activated with a single switch for quick setup.
- Each auger and each conveyor can also be activated individually in manual or automatic mode when certain conditions exist.
Advanced Control
- Advanced hopper controls enhance operator efficiency by allowing more focus to be on the work site.
- The advanced control activates the hopper fold or retract function with a single touch. The operator doesn't have to press the switch through the entire travel cycle.
Cleanout and Warm-Up Mode
- Simple preparation and cleaning can save time.
- The cleanout and warm-up mode activates the augers, conveyors, and tamper bars (if equipped) at slow speed enabling for the application of inhibitors that help prevent material build-up.
Comfort and Visibility
- Providing reliable machine control in inclement weather can be a challenge.
- Water resistant consoles provide excellent reliability and meet IP67 common water submergence ratings.
- The switches have been tested to one million cycles without failure. If a failure does occur, grouped components are serviceable and it's not necessary to replace the entire console.
Electric Heat
- The electric heat control panel utilizes touch-pad technology and LED indicator lights to create a user-friendly interface.
- Three pre-set temperature settings for each screed section ensure even-heat distribution and manual adjustments provide override capability.
- On-board diagnostics enable the operator to verify fault indicators.
Tamper Bar Screed
- The SE34 VT combines vibratory screed plates and tamper bars.
- Variable speed settings for tamping speed and vibratory speed help fine tune the system to maximize mat quality.
Quick Change Heating Elements
- The screed plate heating elements easily slide out for fast replacement in the event that a failure occurs.
- The technologically advanced monitoring system automatically keeps the screed plates heating if a temperature sensor fails.
High Efficiency Powertrain
- Advanced Eco-mode modifies engine speed to save fuel and reduce sound levels, leading to lower operating costs and better work site communication.
- Three steering/travel modes provide alternative control options for paving, traveling, and maneuvering around the job site.
- Pave mode enables a paving speed up to 64 mpm (210 fpm), while travel mode offers a quick speed of 11 kph (7 mph).
- Maneuver mode offers tight turning capability for easier positioning in compact areas.
More Traction
- The Mobil-Trac Undercarriage combines the speed of a wheel paver with the traction and flotation of a track paver.
- This system is equipped with oscillating bogie sets that help the Mobil-trac maintain contact with the surface regardless of irregularities.
- Grade deviations and and tow point movement are minimized due to the smooth motion of these bogie sets, resulting in smoother paving results.
- This system is maintenance-free. Rubber coated components shed asphalt and prevent accumlation, while self-tensioning accumulators, center guide blocks, and internal belt cables ensure reliability.
Automation Enhances Material Flow
- Consistent paving starts can lead to smoother pavement. At the beginning of each pass, the auto-fill material feed system activates the augers and conveyors and moves material across the face of the screed until the material reaches the set points of the feed sensors.
- This consistency allows the operators to quickly fine tune the feeder system speeds for smooth material flow in front of the screed.
Technology Enhancements
- Technology enhancements optimize operator performance.
- The material feed system can be activated with a single switch for quick setup.
- Each auger and each conveyor can also be activated individually in manual or automatic mode when certain conditions exist.
Advanced Control
- Advanced hopper controls enhance operator efficiency by allowing more focus to be on the work site.
- The advanced control activates the hopper fold or retract function with a single touch. The operator doesn't have to press the switch through the entire travel cycle.
Cleanout and Warm-Up Mode
- Simple preparation and cleaning can save time.
- The cleanout and warm-up mode activates the augers, conveyors, and tamper bars (if equipped) at slow speed enabling for the application of inhibitors that help prevent material build-up.
Comfort and Visibility
- Providing reliable machine control in inclement weather can be a challenge.
- Water resistant consoles provide excellent reliability and meet IP67 common water submergence ratings.
- The switches have been tested to one million cycles without failure. If a failure does occur, grouped components are serviceable and it's not necessary to replace the entire console.
- Easy recognition and reliable controls help operators perform more efficiently.
- The raised switch design and adjustable brightness controls simplify nighttime operation, while the touch screen LCD displays allow for customization.
- Multiple language options and large symbols accomodate crew diversity.
Electric Heat
- The electric heat control panel utilizes touch-pad technology and LED indicator lights to create a user-friendly interface.
- Three pre-set temperature settings for each screed section ensure even-heat distribution and manual adjustments provide override capability.
- On-board diagnostics enable the operator to verify fault indicators.
Tamper Bar Screed
- The SE34 VT combines vibratory screed plates and tamper bars.
- Variable speed settings for tamping speed and vibratory speed help fine tune the system to maximize mat quality.
Quick Change Heating Elements
- The screed plate heating elements easily slide out for fast replacement in the event that a failure occurs.
- The technologically advanced monitoring system automatically keeps the screed plates heating if a temperature sensor fails.
Dimensions
- Truck Entry Height
- 21.5in
- Transport Width
- 6.3ft
- Operating Height - With Canopy
- 11.1ft
- Operating Width
- 10.45ft
- Ground Contact Length
- 8.6ft
- Operating Length
- 16.5ft
- Transport Height - Canopy Retracted
- 8.6ft
- Truck Entry Width
- 10.3ft
- Transport Length
- 15.75ft
Engine
- Engine Model
- Cat C3.3B
- Gross Power
- 74.8HP
Operating Specifications
- Maximum Paving Speed
- 210ft/min
- Maximum Travel Speed
- 7mile/h
- Standard Paving Range
- 1.75-3.42 m (5' 9" - 11' 2")
- Maximum Paving Width
- 15.1ft
Weights
- Operating Weight - With SE34 V
- 18850lb
- Tractor Weight
- 16094lb
- Operating Weight - With SE34 VT
- 19246lb
Service Refill Capacities
- Washdown Tank
- 6.2gal (US)
- Fuel Tank Capacity
- 29gal (US)