SE50 VT Screed

SE50 VT Tamper Bar Screed

Overview

The SE50 VT is a Tamper bar screed that is equipped with rear-mounted extenders and vibratory screed plates. It offers a standard extendable paving range of 2.55 – 5.0 m (8′ 4″ – 16′ 4″) and excels on highways, parking lots, urban streets and other variable width paving applications.

Fast Heating
The 70 kW, tractor integrated generator combined with the technologically advanced screed heating system, ensures fast, even heat distribution. The 15 minute heating time at standard widths can lead to more daily production and lower fuel consumption due to less time waiting for the screed plates to...
Tamper Bars
Tamper bars effectively tuck material under the screed plates to provide precompaction. Adjustable starting and stopping ramp rates maintain an optimal mat finish, while an auto-speed setting accomodates changes in paving speed.
Exclusive Monitoring
The exclusive generator system monitors heating elements for failure conditions in order to help plan for scheduled service events. Furthermore, temperature zone monitoring allows heating to continue in the event of a sensor failure and warning indicators are delivered through the LCD displays.
More Control
The extenders are equipped with 2 speed ranges and proportional control for better performance around obstacles. Pendant controls located on the extenders enable operators to perform functions remotely. The conveyor ratio adjustment can be made from the screed control panel when utilizing the 2-sen...
Integrated Cat Grade Control
Factory integrated Cat Grade Control allows the crew to operate from either of the tractor or screed consoles. A split screen mode enables the screed operators to work from a single side or from each side of the screed. This is especially helpful when training new operators and when the crew is task...
Simple Adjustment
Power controls for crown, slope, and height allow for on-the-go adjustment at standard and maximum widths. The exclusive trailing edge screed plate adjusters as well as machined screed frames help optimize plate life and simplify leveling procedures.
Easy Service, Increased Durability
Water resistant consoles and LCD displays ensure performance in adverse conditions and the million-cycle keypad switches and oil-bath vibratory pods provide longterm reliability. The heating elements slide out for easy replacement. An innovative design simplifies extension additions when setting up ...
Fast Heating
The 70 kW, tractor integrated generator combined with the technologically advanced screed heating system, ensures fast, even heat distribution. The 15 minute heating time at standard widths can lead to more daily production and lower fuel consumption due to less time waiting for the screed plates to reach the preset temperature. At maximum widths screed plate heating occurs in as little as 25 minutes.
Tamper Bars
Tamper bars effectively tuck material under the screed plates to provide precompaction. Adjustable starting and stopping ramp rates maintain an optimal mat finish, while an auto-speed setting accomodates changes in paving speed.
Exclusive Monitoring
The exclusive generator system monitors heating elements for failure conditions in order to help plan for scheduled service events. Furthermore, temperature zone monitoring allows heating to continue in the event of a sensor failure and warning indicators are delivered through the LCD displays.
More Control
The extenders are equipped with 2 speed ranges and proportional control for better performance around obstacles. Pendant controls located on the extenders enable operators to perform functions remotely. The conveyor ratio adjustment can be made from the screed control panel when utilizing the 2-sensor feeder system in order to maintain optimal material height in front of the screed.
Integrated Cat Grade Control
Factory integrated Cat Grade Control allows the crew to operate from either of the tractor or screed consoles. A split screen mode enables the screed operators to work from a single side or from each side of the screed. This is especially helpful when training new operators and when the crew is tasked with multiple job site duties.
Simple Adjustment
Power controls for crown, slope, and height allow for on-the-go adjustment at standard and maximum widths. The exclusive trailing edge screed plate adjusters as well as machined screed frames help optimize plate life and simplify leveling procedures.
Easy Service, Increased Durability
Water resistant consoles and LCD displays ensure performance in adverse conditions and the million-cycle keypad switches and oil-bath vibratory pods provide longterm reliability. The heating elements slide out for easy replacement. An innovative design simplifies extension additions when setting up for wider width paving. A single person can easily accomplish this task without the use of additional lifting devices.

Operating Specifications

Extender Height Range
-20 mm to +50 mm
Heating Time - Maximum Width
25 minutes
Heating Time - Standard Width
15 minutes
Vibrator Speed Range
0 to 3000 rpm
Crown Range
-2% to +5%
Maximum Paving Depth
12in
Tamper Speed Range
700 to 1800 rpm
Extender Slope Range
-3% to +2%
Maximum Paving Range
26.3ft
Standard Paving Range
2.55 - 5.0 m (8' 4" - 16' 4")

Dimensions

Length - Front to Back, Endgates Removed
68in
Transport Length - Tractor and Screed
22.1ft
Length - Front to Back, Endgates Attached
92in
Screed Plate Width - Front to Back
12.75in
Transport Width - Endgates Folded
8.33ft

Weights

Standard Weight
7363lb

See how SE50 VT Tamper Bar Screed compares against frequently compared products

SE50 VT Tamper Bar Screed Asphalt Pavers

Length - Front to Back, Endgates Removed
68 in
Transport Length - Tractor and Screed
22.1 ft
Length - Front to Back, Endgates Attached
92 in
Selected Model

SE50 VT Tamper Bar Screed Asphalt Pavers

Length - Front to Back, Endgates Removed
68 in
Transport Length - Tractor and Screed
22.1 ft
Length - Front to Back, Endgates Attached
92 in
View Full Specs

SE50 V Vibratory Screed Asphalt Pavers

Length - Front to Back, Endgates Removed
68 in
Transport Length - Tractor and Screed
22.1 ft
Length - Front to Back, Endgates Attached
92 in
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials