Sorry, there aren’t current any spinsets for this product.
Sorry, there aren’t current any deals for this product.
Ample legroom inside the cab makes rotating the seat simple. The air suspension seat provides comfort to the operator while roading.
Pilot joysticks are available for additional operator comfort, reduced fatigue and increased productivity. New Proportional Thumb Rollers on the Pilot Joysticks places E-Stick and Rear Auxiliary Controls at the operator’s fingertips.
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.
A Four Speed Powershift Transmission is available to make shifting gears smooth and as simple as twisting the Powershuttle Lever.
A SAHR Parking Brake is available and activated at the push of a button and automatically engages when the machine is powered down.
The proven Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a diesel oxidation catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.
The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.
A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.
The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester) • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent of 2.3 metric tonnes (2.5 tons).
Operator Sound Pressure Level (ISO 6396:2008) – 76 dB(A)*
Exterior Sound Power Level (ISO 6395:2008) – 101 dB(A)
* Measurements were conducted with properly installed and maintained cab doors and windows closed.
Caterpillar factory fills with ethylene glycol coolants. Cat Diesel Engine Antifreeze/Coolant (DEAC) and Cat Extended Life Coolant (ELC) can be recycled. Consult your Cat dealer for more information.
Cat Bio HYDO™ Advanced is an EU Ecolabel approved biodegradable hydraulic oil.
Additional fluids are likely to be present, please consult the Operations and Maintenance Manual or the Application and Installation guide for complete fluid recommendations and maintenance intervals.
The following features and technology may contribute to fuel savings and/or carbon reduction. Features may vary. Consult your Cat dealer for details. – Save fuel and reduce your greenhouse gas emissions with efficiency features such as operator control modes selectable through the display and with fuel management modes. – Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine. – Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Net Power – SAE J1349
70 HP (52 kW) / 86 HP (64 kW)
Displacement
220in³
Net Power Rating at 2,200 rpm – SAE J1349
86hp
Net Power Rating at 2,200 rpm – ISO 9249
85hp
Ratings at 2,200 rpm – Gross Power SAE J1995
96hp
Power Rating Conditions – No De-Rating Required Up To
10000ft
Engine Model
C3.6 70 kW (96 hp) Electronic Turbo Intercooled
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Net Torque Rise – 1,400 rpm – SAE J1349
43%
Ratings at 2,200 rpm – Gross Power ISO 14396
94hp
Net Torque Rise – 1,400 rpm – SAE J1349
292ft-lb
Net Peak Power Rating @ 2,200 rpm – SAE J1349
86hp
Dimensions – Bore
3.86in
Net Peak Power Rating @ 2,200 rpm – ISO 9249
85hp
Dimensions – Stroke
4.72in
Dig Depth – Standard
14ft
Operating Weight – Maximum
24251lb
Cab – ROPS/FOPS
306lb
Air Conditioning
99lb
Operating Weight – Estimated*
16532lb
Auto-Shift Transmission
269lb
MP Bucket (0.96 m3/1.25 yd3) – Without Fold-Over Forks
1642lb
Ride Control
33lb
Note
*Machine configuration: standard stick hoe, OROPS canopy, 4WD standard shift transmission, 0.96 m³ (1.25 yd³) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 240 kg (530 lb) counterwei
Operating Weight – Maximum – ROPS Capacity
24251lb
MP Bucket (0.96 m3/1.25 yd3) – With Fold-Over Forks
2017lb
Counterweights, base – Maximum
1014lb
Counterweights, base
256lb
Loader QC
540lb
Counterweights, base – Stackable, one
529lb
Extendible Stick (excludes ft. counterweight)
613lb
All-Wheel Drive
STD (N/A)
Pump Type
Variable-flow, Axial Piston
Type
Closed Center
System Pressure – Loader
3336psi
System Pressure – Backhoe
3336psi
Pump Capacity at 2,200 rpm
34.9gal/min
Turning Circle – (inner wheel not braked) – Outside Front Wheels
26.92ft
Power Steering
Hydrostatic
Stroke
4.2in
Bore
2.6in
Turning Circle – (inner wheel not braked) – Outside Widest Loader Bucket
35.25ft
Type
Front Wheel Steering
Axle Oscillation
11°
Rod Diameter
1.6in
Cylinder
One Double-Acting
Hydraulic System
25.1gal (US)
Engine Oil – With Filter
2.4gal (US)
Hydraulic Tank
11.1gal (US)
Diesel Exhaust Fluid (DEF)
5gal (US)
Cooling System with Air Conditioning
4.8gal (US)
Rear Axle
4.2gal (US)
Fuel Tank
42.3gal (US)
Rear Axle – Planetaries
0.4gal (US)
Transmission – Power Shuttle – AWD
4.8gal (US)
Transmission – Power Shift – AWD
5gal (US)
Front Axle (AWD)
2.9gal (US)
Front Axle (AWD) – Planetaries
0.2gal (US)
Recyclability
92%
Note
Travel speeds of backhoe loader at full throttle, when equipped with 500/70-24 rear tires.
Hydraulics, load sensing with variable displacement piston pump
Indicator lights: wait to start, water in fuel, engine warning, warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature: LCD warnings: engine oil pressure, machine locked, service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
Instrument panel lights
Key start/stop system
LCD operator display with soft key controls: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
Loader, self-leveling, return-to-dig and transmission disconnect switch
Loader, single tilt
Mechanical two lever controls
Mirror, interior, rearview
Open circuit breather
Power receptacle, 5 volt USB, 1 internal
Power receptacle, 12 volt, 2 internal, 1 external
Power steering, hydrostatic
Product Link™, cellular, network manager
Product Link, satellite, network manager
Seat belt, retractable, 51 mm (2 in)
Socket, two roof
Stabilizer shoes, street
Steering column, tilting
Steering knob
Seat, air suspension, vinyl cover, with armrest
Starting system, glow plugs
Storage compartment, lockable
Storage tray
Stop and tail lights
Swing transport lock
Tilt steering column
Tires
Toolbox, external, lockable
Torque converter
Throttle, hand and foot, electronic
Transmission, four speed, manual, syncromesh
Transmission neutralizer switch
Transport tie-downs
Vandalism locks, four
Warning horn, electric
Optional Equipment
Auxiliary hydraulics, rear, adjustable flow
Battery, additional, 850 CCA
Brake, parking, Spring Applied Hydraulically Release (SAHR)
Cab, standard
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Fenders, front with integral steps
Guard, boom protection plate
Guard, stabilizer, rock
Hydraulic valves, loader (3rd valve for MP or Quick Coupler)
Hydraulic valves, backhoe (5th and 6th function)
Hydraulic lines, combined function auxiliary
Joystick controls: pilot operated, excavator style with pattern changer
LED lights, working (2 front, 2 rear)
Pattern changer, in cab
Quick Coupler, hydraulic, dual lock
Quick Coupler, manual, dual lock
Quick Coupler, manual, pin lock
Radio and CD player, Bluetooth®
Ride Control
Rotating beacon, magnetic mount
Seat, air suspension, fabric with armrest
Seat belt, retractable, 75 mm (3 in)
Security system, Bluetooth
Security System, operator display
Side mirrors, cab, external
Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
Stabilizer pads, grouser type
Stabilizer pads, reversible
Stick, extendible
Transmission, 4 speed, powershift
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.
Take the virtual product tour
Explore the features and Benefits of the 416 Backhoe Loader