430 Backhoe Loader

https://s7d2.scene7.com/is/image/Caterpillar/CM20191104-70d97-55af0

Ample legroom inside the cab makes rotating the seat simple. The air suspension seat provides comfort to the operator while roading. New backhoe control pods allow for unlimited adjustability.

The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.

The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.

The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.

A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.

A Four Speed Powershift Transmission is standard to make shifting gears smooth and as simple as twisting the Powershuttle Lever.

The SAHR Parking Brake is activated at the push of a button and automatically engages when the machine is powered down.

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to:
• 20% biodiesel FAME (fatty acid methyl ester)
• 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels
Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent of 2.3 metric tonnes (2.5 tons).

Operator Sound Pressure Level (ISO 6396:2008) – 76 dB(A)*
Exterior Sound Power Level (ISO 6395:2008) – 101 dB(A)
* Measurements were conducted with properly installed and maintained cab doors and windows closed.

Caterpillar factory fills with ethylene glycol coolants. Cat Diesel Engine Antifreeze/Coolant (DEAC) and Cat Extended Life Coolant (ELC) can be recycled. Consult your Cat dealer for more information.
Cat Bio HYDO™ Advanced is an EU Ecolabel approved biodegradable hydraulic oil.
Additional fluids are likely to be present, please consult the Operations and Maintenance Manual or the Application and Installation guide for complete fluid recommendations and maintenance intervals.

The following features and technology may contribute to fuel savings and/or carbon reduction. Features may vary. Consult your Cat dealer for details.
– Save fuel and reduce your greenhouse gas emissions with efficiency features such as operator control modes selectable through the display and with fuel management modes.
– Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
– Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.

Net Power – SAE J1349:2011: 107hp

Displacement: 220in³

Net Torque Rise – 1,400 rpm – SAE J1349: 358ft-lb

Power Rating Conditions – No De-Rating Required Up To: 10000ft

Net Power Rating at 2,200 rpm – ISO 9249: 107hp

Net Power Rating at 2,200 rpm – SAE J1349: 107hp

Emissions: Engine meets Tier 4 Final/Stage V emission standards.

Net Torque Rise – 1,400 rpm – SAE J1349: 40%

Ratings at 2,200 rpm – Gross Power ISO 14396: 115hp

Ratings at 2,200 rpm – Gross Power SAE J1995: 118hp

Engine Model: C3.6 86 kW (115 hp) Electronic Turbo Intercooled

Dimensions – Stroke: 4.72in

Net Peak Power Rating @ 2,200 rpm – SAE J1349: 107hp

Dimensions – Bore: 3.86in

Net Peak Power Rating @ 2,200 rpm – ISO 9249: 107hp

Dig Depth – Standard: 15.1ft

Operating Weight – Maximum: 24251lb

Cab – ROPS/FOPS: 320lb

Ride Control: 33lb

Air Conditioning: 99lb

Note (2): **Minimum weight configuration is the same as configuration above, however, excludes counterweight, hoe bucket, and operator.

Operating Weight – Maximum – ROPS Capacity: 24251lb

MP Bucket (0.96 m3/1.25 yd3) – Without Fold-Over Forks: 1642lb

Operating Weight – Estimated*: 18051lb

MP Bucket (0.96 m3/1.25 yd3) – With Fold-Over Forks: 2017lb

Note (1): *Machine configuration: standard stick hoe, OROPS canopy, AWD powershift shift transmission, 0.96 m3 (1.25 yd3) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 460 kg (1,014 lb) counte

All-Wheel Drive: STD

Operating Weight (minimum)**: 16590lb

Loader QC: 540lb

Auto-Shift Transmission: STD

Counterweights, base – Maximum: 1014lb

Extendible Stick (excludes ft. counterweight): 655lb

Counterweights, base – Stackable, one: 529lb

Counterweights, base: 256lb

Pump Type: Variable-flow, Axial Piston

System Pressure – Backhoe: 3626psi

Pump Capacity at 2,200 rpm: 49.4gal/min

Type: Closed Center

System Pressure – Loader: 3626psi

Power-Shift Transmission with LTC – Optional – Forward – 3rd: 8mile/h

Power-Shift Transmission with LTC – Optional – Forward – 5th: 17mile/h

Power-Shift Transmission with LTC – Optional – Reverse – 2nd: 7.7mile/h

Power-Shift Transmission – Optional – Reverse – 1st: 3.7mile/h

Power-Shift Transmission – Optional – Forward – 2nd: 5.9mile/h

Power-Shift Transmission – Optional – Forward -1st: 3.7mile/h

Power-Shift Transmission with LTC – Optional – Reverse – 3rd: 17mile/h

Power-Shift Transmission with LTC – Optional – Forward – 4th: 12mile/h

Power-Shift Transmission – Optional – Forward – 6th: 26mile/h

Power-Shift Transmission – Optional – Forward – 3rd: 8mile/h

Note (1): *Travel speeds of backhoe loader at full throttle, when equipped with 500/70-24 rear tires.

Note (2): **Limited by engine speed to 40 km/h (25 mph).

Power-Shift Transmission with LTC – Optional – Forward – 5th LTC: 18mile/h

Power Shift Transmission – Standard – Reverse – 3rd: 17mile/h

Power-Shift Transmission with LTC – Optional – Reverse – 1st: 3.7mile/h

Power-Shift Transmission with LTC – Optional – Forward – 6th: 26mile/h

Power-Shift Transmission with LTC – Optional – Forward – 6th LTC*: 25mile/h

Power Shift Transmission – Standard – Reverse – 1st: 3.7mile/h

Power Shift Transmission – Standard – Forward – 4th: 26mile/h

Power Shift Transmission – Standard – Reverse – 2nd: 7.7mile/h

Power-Shift Transmission – Optional – Reverse – 3rd: 17mile/h

Power-Shift Transmission with LTC – Optional – Forward – 2nd: 5.9mile/h

Power Shift Transmission – Standard – Forward – 1st: 3.7mile/h

Power Shift Transmission – Standard – Forward – 3rd: 12mile/h

Power-Shift Transmission with LTC – Optional – Forward – 1st: 3.7mile/h

Power Shift Transmission – Standard – Forward – 2nd: 5.9mile/h

Power-Shift Transmission – Optional – Reverse – 2nd: 7.7mile/h

Power-Shift Transmission – Optional – Forward – 4th: 12mile/h

Power-Shift Transmission – Optional – Forward – 5th: 17mile/h

Front Axle, AWD – Static: 51808lb

Rear Axle – Dynamic: 22046lb

Front Axle, AWD – Dynamic: 19841lb

Rear Axle – Static: 58422lb

Bore: 2.6in

Stroke: 4.2in

Turning Circle – (inner wheel not braked) – Outside Widest Loader Bucket: 35.25ft

Axle Oscillation: 11°

Power Steering: Hydrostatic

Turning Circle – (inner wheel not braked) – Outside Front Wheels: 26.92ft

Rod Diameter: 1.6in

Type: Front Wheel Steering

Cylinder: One Double-Acting

Diesel Exhaust Fluid (DEF): 5gal (US)

Transmission – Power Shift – AWD: 5gal (US)

Front Axle (AWD): 2.9gal (US)

Front Axle (AWD) – Planetaries: 0.2gal (US)

Transmission – Power Shuttle – AWD: 4.8gal (US)

Engine Oil – With Filter: 2.4gal (US)

Rear Axle – Planetaries: 0.4gal (US)

Cooling System with Air Conditioning: 4.8gal (US)

Rear Axle: 4.2gal (US)

Fuel Tank: 42.3gal (US)

Hydraulic System: 25.1gal (US)

Hydraulic Tank: 11.1gal (US)

Recyclability: 92%

Standard Equipment
- Adjustable auxiliary controls, backhoe loader
- Air cleaner
- Alarm, back-up
- Audible system fault alarm
- Automatic Engine Speed Control (AESC)
- Battery, maintenance-free, 850 CCA
- Battery disconnect switch
- Boom transport lock
- Brace, lift cylinder
- Brake, parking, Spring Applied Hydraulically Released (SAHR)
- Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
- Bucket level indicator
- Canopy, ROPS/FOPS
- Cat cushion swing system
- Coat restraint
- Coolant/antifreeze, extended life
- Dome light (cab only)
- Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
- Differential lock, loader joystick
- Drink holders, two
- Engine, Cat C3.6 ACERT (Direct Injection Turbocharged), meets Tier 4 Final/Stage V emission standards, Selective Catalytic Reduction, Diesel Oxidation Catalyst (DOC)
- Engine enclosure, sound suppression, removable side panels
- Face seals, O-ring
- Fan, suction and guard
- Fast reversing shuttle, all gears
- Fenders, rear
- Filters, spin-on: fuel, engine oil, transmission oil, water separator
- Filters, bowl and cartridge: hydraulic fluid
- Flashing hazards/signal lights
- Floor mat
- Fuel tank, fully enclosed
- Four wheel drive
- Four wheel drive shaft guard
- Fully hinged front grill for cooling package cleaning access
- Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
- Ground level fuel fill and DEF fill
- Halogen lights, working (2 front, 2 rear)
- High ambient cooling package
- Hood lock, inside cab
- Hydraulic hose, XT^™
- Hydraulic oil cooler
- Hydraulic oil level sight gauge
- Hydraulic valves, loader 2 function
- Hydraulic valves, backhoe 4 function
- Hydraulics, load sensing with variable displacement piston pump
- Indicator lights: wait to start, water in fuel, engine warning, warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature: LCD warnings: engine oil pressure, machine locked, service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
- Instrument panel lights
- Joystick controls: pilot operated, excavator-style with pattern changer
- Key start/stop system
- LCD operator display with soft key controls: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
- Loader, self-leveling, return-to-dig and transmission disconnect switch
- Loader, single tilt
- Mirror, interior, rearview
- One-touch low idle
- Open circuit breather
- Pattern changer, in cab
- Power receptacle, 5 volt USB, 1 internal
- Power receptacle, 12 volt, 2 internal, 1 external
- Power steering, hydrostatic
- Product Link^™, satellite, network manager
- Product Link, cellular, network manager
- Seat belt, retractable, 51 mm (2 in)
- Socket, two roof
- Stabilizer shoes, street
- Steering knob
- Seat, air suspension, vinyl cover, with armrest
- Stabilizers, EH Control, Auto-UP
- Starting system, glow plugs
- Steering column, tilting, telescopic
- Storage compartment, lockable
- Storage tray
- Stop and tail lights
- Swing transport lock
- Tires
- Toolbox, external, lockable
- Torque converter
- Throttle, hand and foot, electronic
- Transmission, 4 speed, powershift
- Transmission neutralizer switch
- Transport tie-downs
- Vandalism locks, four
- Warning horn, electric

Optional Equipment
- Auxiliary hydraulics, loader, adjustable flow
- Auxiliary hydraulics, rear, adjustable flow
- Battery, additional, 850 CCA
- Cab, deluxe
- Cold weather fuel (–30° C/–22° F)
- Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
- Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
- Fenders, front with integral steps
- Guard, boom protection plate
- Guard, stabilizer, rock
- Hydraulic valves, loader with auxiliary thumb control (3rd valve for MP or Quick Coupler)
- Hydraulic valves, backhoe (5th and 6th function)
- Hydraulic lines, combined function auxiliary
- LED lights, working (2 front, 2 rear)
- Quick Coupler, hydraulic, dual lock
- Quick Coupler, manual, dual lock
- Quick Coupler, manual, pin lock
- Radio and CD player, Bluetooth^®
- Ride Control
- Rotating beacon, magnetic mount
- Seat, air suspension, fabric with armrest
- Seat, air suspension, fabric with armrest, heated
- Seat belt, retractable, 75 mm (3 in)
- Security system, Bluetooth
- Security system, operator display
- Side mirrors, cab, external
- Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
- Stabilizer pads, reversible
- Stick, extendible
- Transmission, AutoShift with lock-up torque converter, 6 speed
- Vandalism protection, gauge cover
- Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

Hydraulic Hose Rebuild

Hydraulic Hose Rebuild

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

Hydraulic Hose Rebuild

Hydraulic Hose Rebuild

430 Backhoe Loader

Overview