301.7 CR Mini Hydraulic Excavator

masthead-innerpage-bg
https://s7d2.scene7.com/is/image/Caterpillar/CM20181127-33999-40437

  • Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.
https://s7d2.scene7.com/is/image/Caterpillar/CM20190219-59542-59752

  • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
https://s7d2.scene7.com/is/image/Caterpillar/CM20181219-72875-15507

  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
https://s7d2.scene7.com/is/image/Caterpillar/CM20190101-66686-50442

  • Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
https://s7d2.scene7.com/is/image/Caterpillar/CM20181127-34500-59808

  • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.
https://s7d2.scene7.com/is/image/Caterpillar/CM20181005-49259-38288

  • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.
https://s7d2.scene7.com/is/image/Caterpillar/CM20181005-29088-57797

  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
https://s7d2.scene7.com/is/image/Caterpillar/CM20181025-79713-45978

  • The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
  • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)
Net Power
21hp
Engine Model
C1.1
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Bore
3in
Stroke
3.2in
Displacement
69in³
Note
Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture.
Engine Power
21.6hp
Operating Weight
4222lb
Minimum Operating Weight with Canopy*
3946lb
Maximum Operating Weight with Canopy**
4222lb
Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Note (1)
*Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank.
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
EU: CE Plate Weight***
4167lb
Dig Depth
100in
Tail Swing
25.6in
O/A Shipping Height
90.6in
Maximum Blade Height
10.6in
Minimum Ground Clearance Below Undercarriage
5.5in
O/A Undercarriage Length
62.6in
Boom Height – Shipping Position
40.9in
Maximum Dump Clearance
98.8in
Track Belt/Shoe Width
9.1in
Maximum Dig Height
137.4in
Track Width – Expanded
51.18in
Maximum Reach – Ground Level
159.8in
Swing Bearing – Height
17.4in
Boom Swing – Left
65°
Stick Length
45.7in
Vertical Wall
74.4in
Track Width – Retracted
39in
Boom Swing – Right
50°
Note
*Overall Shipping Length depends on blade position during shipment.
Maximum Reach
162.6in
Boom In Reach
63.8in
Overall Shipping Length*
141.3in
Maximum Blade Depth
10.4in
Height
8.9in
Note
*Expanded – 1300 mm (51 in)
Width*
39in
Operating Pressure – Equipment
3553.4psi
Operating Pressure – Swing
2132.1psi
Digging Force – Stick – Standard
2135.7lbf
Pump Flow at 2,400 rpm
17.4gal/min
Auxiliary Circuit – Primary – Pressure
3553.4psi
Digging Force – Bucket
3641.9lbf
Auxiliary Circuit – Secondary – Pressure
3553.4psi
Operating Pressure – Travel
3553.4psi
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Auxiliary Circuit – Secondary – Flow
3.7gal/min
Auxiliary Circuit – Primary – Flow
8.7gal/min
Digging Force – Stick – Long
1865.9lbf
Track Belt/Shoe Width
9.1in
Overall Shipping Length*
142.5in
Track Width – Expanded
51.18in
O/A Undercarriage Length
62.6in
Maximum Reach – Ground Level
153.5in
Boom Height – Shipping Position
42.9in
Boom Swing – Left
65°
Maximum Reach
156.3in
Maximum Blade Depth
10.4in
Dig Depth
92.5in
Maximum Dump Clearance
96.5in
Maximum Blade Height
10.6in
Tail Swing
25.6in
Boom In Reach
64.2in
Minimum Ground Clearance Below Undercarriage
5.5in
O/A Shipping Height
90.6in
Swing Bearing – Height
17.4in
Stick Length
37.8in
Vertical Wall
70.9in
Boom Swing – Right
50°