730 EJ Articulated Truck

https://s7d2.scene7.com/is/image/Caterpillar/CM20250710-af11e-3cf58

Cat C13B engine delivers proven reliability across a variety of applications.
Terrain-based throttle control smooths throttle input over rough terrain to improve ride quality.
Enhanced reliability through commonality and design simplicity with long life to overhaul.
Minimized impact of emission control system allows excellent response and ample power.
Engine compression brake improves response and increases retarding power for controlled descent of grades.
Aftertreatment technologies reduce emissions, including reducing NOx emissions by 80%.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-af6a3-3cf54

The truck can eject and spread the material while moving, reducing additional spreading and dozing equipment. “On-the-go” ejecting results in faster cycle times.
Ejecting the load without raising the body maintains machine stability, allowing load dispersal on inclines, side slopes, and in very soft underfoot conditions, especially on landfill sites.
The truck can eject in areas with reduced overhead clearance, such as around overhead lines or in tunneling and underground operations.
The body design virtually eliminates material sticking to the body, which increases productivity, improves fuel efficiency, and lowers cost per ton.
The ejector blade is made from high-strength steel and uses technology similar to that proven in Cat wheel tractor-scrapers.
A three-stage, high-speed, double-acting cylinder is specifically designed for horizontal mounting and smooth load ejection.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-b72ab-efb4e

All structures and components are proven through extensive testing and customer experience.
Advanced suspension allows for greater speed over rough terrain, while softening impact loads.
Front suspension oscillates ±6 degrees for a smooth ride.
Frames are designed to handle torque loads, decrease hitch area stress, and optimize suspension geometry.
Frames are robot-welded for maximum durability.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-6c9e5-4c2a6

Advanced Automatic Traction Control (AATC) decreases wheel slippage, delivering maximum traction and productivity. Fully automatic, no operator action.
Automatic Retarder Control (ARC) manages the retarder without any operator interaction. Fully automatic, 100% of the time.
Assisted Hoisting Control allows automatic ejecting of the load.
Combined eject/transmission lever, exclusive to Caterpillar, places multiple controls on the transmission lever, incorporates park brake, and reduces operator interaction by as much as 50%.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-74acf-84638

Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
This machine design improves fuel economy with minimized maintenance costs and the same great power and response.
Innovative air-management systems optimize airflow and enhance power and fuel efficiency.
Fully automatic retarder control helps prevent engine overspeed, protects powertrain components without any operator intervention.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250422-ec22c-b744e

Tilt and telescopic steering column designed for operator comfort and control. This adjustable column allows drivers to fine-tune the steering wheel position for optimal ergonomics, especially during long shifts or rough terrain operations.
Simple, intuitive control and display layouts allow the operator to focus on safe machine operation, while maintaining productivity.
Spacious cab with seats positioned for optimal operator and trainer visibility.
Touchscreen allows easy monitoring and adjustment of systems.
Make and receive hands-free calls via the optional Bluetooth® equipped stereo.
The HVAC system is now managed through the primary display with controls accessible via the jog dial or touchscreen for enhanced operator convenience.
The cab features dedicated storage solutions for everyday items, ensuring convenience and organization for the operator.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250710-2c1f5-a6fb3

Integrated systems give you the ability to make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
Product Link™ system connects to each machine wirelessly, allowing you to monitor location, hours, fuel use, productivity, idle time, and diagnostic codes.
Improved payload technology allows operators to view real-time load weights on the integrated display. Updated software and sensors provide accurate data.
External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
Stability Assist software reports information via online VisionLink™, increasing awareness of machine history if a rollover has occurred.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-c34cf-86fef

Unique safety feature Dynamic Roll Protection supports rollover prevention and works in parallel with the already successful Cat Detect with Stability Assist, reducing downtime and safety repairs from machine rollover events.
Operator-presence detection system applies parking brake if gear is engaged and operator is not seated.
In-cab tertiary switch allows operator to bring the machine to a safe stop in the unlikely event of both main and secondary brake circuits failing.
Hill Assist reduces potential rollback on grades.
Auto Wait Brake applies the service brakes when neutral is selected and button is pressed, allowing quick and easy control of the machine while dumping and loading.
Ground-level fuel fill and diesel exhuast fluid (DEF) fill tanks.
Integrated payload lights [when Cat Payload Monitoring (CPM) option is fitted] with wide angle beam lights on all cab roof corners provide clear visibility to loading tool operator and site controllers.
Secondary steering activates automatically if low pressure is sensed in primary system.
Seat belt indicator provides audible and visible alert if seatbelt is not latched while the machine is on.

https://s7d2.scene7.com/is/image/Caterpillar/CM20250403-9fd85-27029

Durable design and easier servicing mean maximized uptime and reduced service costs.
Universal joints are lubricated for life, eliminating any greasing during the product lifetime.
Coolant formula improves component life by reducing corrosion.
Entire machine is designed for greater ease of maintenance with side-tilting cab, electrically raised hood, access panels, and data connector.
Extended service intervals for the engine and transmission: 1,000 and 2,000 hours, respectively. Doubled from previous models and resulting in lower total cost of ownership.
Durable flexi fender reduces the risk of permanent damages and reduces repair costs.

Engine Model: Cat® C13B

Gross Power (SAE J1995): 361hp

Net Power (SAE J1349): 351hp

Engine Power (ISO 14396): 370hp

Bore: 5.1in

Stroke: 6.2in

Displacement: 763in³

Note (1): Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (2): Advertised power is tested at 1,800 rpm.

Note (3): Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.

Note (4): Net power when the fan is at maximum speed is 262 kW (351 hp) per the SAE reference conditions.

Note (5): Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Stage V emission standards.

Note (6): Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1:2006. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

No Engine De-rating Below: 12500ft

Peak Engine Torque Gross (SAE J1995): 1579lbf·ft

Peak Engine Torque Net (SAE J1349): 1564lbf·ft

Peak Engine Torque Speed: 1200r/min

Rated Payload: 30ton (US)

Heaped (SAE 2:1): 22.1yd³

Struck: 17.7yd³

Forward – 1: 5mile/h

Forward – 2: 9mile/h

Forward – 3: 14mile/h

Forward – 4: 21mile/h

Forward – 5: 29mile/h

Forward – 6: 34mile/h

Reverse – 1: 6mile/h

Note (1): The declared dynamic operator sound pressure level is 72 ± 2 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling

Note (2): Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or doors/windows open for extended periods or in noisy environments.

Front Axle – Empty: 33356lb

Center Axle – Empty: 12368lb

Rear Axle – Empty: 11839lb

Total – Empty: 57563lb

Front Axle – Rated Load: 1433lb

Center Axle – Rated Load: 29156lb

Rear Axle – Rated Load: 29156lb

Total – Rated Load: 59156lb

Front Axle – Loaded: 34789lb

Center Axle – Loaded: 41524lb

Rear Axle – Loaded: 40995lb

Total – Loaded: 117308lb

Type: High strength Brinell HB450 wear resistant steel

Eject Time: 12s

Retract Time: 15s

Fuel Tank: 106gal (US)

DEF Tank: 9gal (US)

Cooling System: 21.9gal (US)

Hydraulic System: 32.5gal (US)

Engine Crankcase: 11.4gal (US)

Transmission: 12.4gal (US)

Final Drives/Differential: 33gal (US)

Output Transfer Gear Box: 6.6gal (US)

Brakes: ISO 3450:2011

Cab – FOPS: ISO 3449:2005 Level II

Cab – ROPS: ISO 3471:2008

Steering: ISO 5010:2019

Turning Dimensions – Steer Angle – Left/Right: 45°

Turning Dimensions – SAE Turning Radius: 294in

Turning Dimensions – Clearance Radius: 318in

Turning Dimensions – Inside Radius: 148in

Turning Dimensions – Aisle Width: 214in

Note: Dimensions are for machines equipped with 750/65 R25 tires.

Lock to Lock: 4.75 seconds @ 60 rpm

Hydraulic Excavators: 350/352 – Passes: 4-5

Hydraulic Excavators: 336 – Passes: 5-6

Wheel Loaders: 972/972 XE – Passes: 3-4

Wheel Loaders: 966/966 XE – Passes: 4

Wheel Loader: 962 – Passes: 4-5

Wheel Loader: 950 – Passes: 5

Note: An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Adjustable air vents
- Combined gear selection and hoist control lever
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Air conditioning
- Heater and defroster with four-speed fan
- Mirrors, exterior
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Eject control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Secondary steering – electro hydraulic
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Sun visor
- Tilt and telescopic steering wheel
- 10-inch touchscreen display with Cat^® rearview camera
- Retractable belt: Operator seat and second seat
- Windows opening both sides, tinted
- Windshield wiper and washer, two speed, intermittent (front)
- Windshield wiper and washer, two speed (rear)
Technology
- Product Link Cellular PLE643
- Cat Detect with Stability Assist
Electrical And Lighting
- Batteries (x2) maintenance free
- Electrical system: 24-volt, 5A 24- to 12-volt converter
- Horn
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
- Main disconnect switch
- Remote starting receptacle (cables not included)
Powertrain
- Auto shift six-speed forward and single reverse transmission
- Cat C13B engine
- Clean Emission Module (CEM) and exhaust aftertreatment package
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
- Dual circuit oil immersed, enclosed brakes – all wheels
- Retarder: engine compression brake
- Three axle, six-wheel drive
Safety
- Reverse alarm
- Rearview camera
- Rollover protective structure (ROPS)/falling objects protective structure (FOPS) cab
- Dynamic Rollover Protection
Guards
- Rear window
- Radiator
- Crankcase
- Front dump body spill guard, integral part of fabricated body
Other Standard Equipment
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- S·O·S sampling valves
- Tires, six 750/65 R25 radial
- Vandalism protection: lockable caps
- Sound suppression (standard in some countries*)
  *Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.
- Underslung tailgate

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Infrared glass – high ambient cab
- Radio, Bluetooth^® stereo system
- Window blinds
- Mirrors, heated motorized
- Secondary touchscreen display
- Operator seat belt, four-point
- Seat, heated/cooled
Technology
- Cat Payload monitoring system
- Product Link Dual PLE683
- Operator Coaching
Electrical And Lighting
- Roof mounted LED work lights
- Ether start
- Cold weather start attachment (2 additional batteries)
- Engine block heater
- Flashing LED beacon
Optional Equipment
- Fast fuel fill
- Auto lube installation for automatic greasing of bearings
- Cold weather coolant –51° C (–60° F)
- Exhaust heated body
- Fuel additive – anti-waxing
- Wheel chocks

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

730 EJ Articulated Truck

Overview

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

Cat Next Gen 730EJ Articulated Truck

360° Exterior View

360° Interior View

Sorry, there aren’t current any deals for this product.

Explore the features and Benefits
of the 730 EJ Articulated Truck

See how 730 EJ Articulated Truck compares against frequently compared products

730 EJ Articulated Truck

735 Articulated Truck

730 EJ Articulated Truck

Compare our equipment

Tools and expert help at every turn

View Specials

Rental Options

Used Options

Find Your Local Branch

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

5 Year Platinum Extended Service Coverage on C32 Products

730 EJ Articulated Truck

Overview

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

730 EJ Three Axle Articulated Truck

Cat Next Gen 730EJ Articulated Truck

360° Exterior View

360° Interior View

Sorry, there aren’t current any deals for this product.

Explore the features and Benefits of the 730 EJ Articulated Truck

See how 730 EJ Articulated Truck compares against frequently compared products

730 EJ Articulated Truck

735 Articulated Truck

730 EJ Articulated Truck

Compare our equipment

Tools and expert help at every turn

View Specials

Rental Options

Used Options

Find Your Local Branch

Explore the features and Benefits
of the 730 EJ Articulated Truck