903D Compact Wheel Loader

masthead-innerpage-bg

903D Compact Wheel Loader

Overview

The Cat® 903D is compact, yet powerful, delivering high performance with outstanding versatility. A 25% increase in lift capacity and travel speed will allow the operator to be more productive, while new optional features such as engine and ground speed control, provides customizable control when running hydro-mechanical work tools. With a more ergonomic cab, new multi-function joystick, and optional ride control, the 903D allows the operator to enjoy all day comfort.

https://s7d2.scene7.com/is/image/Caterpillar/CM20180731-57527-11722

The 903D Makes Work Easy with a 25% increase in tipping capacity to handle classic landscaping materials along with a 25% faster ground speed. The optional hydraulic Skid Steer Loader style coupler allows for changing work tools without getting out of the cab. Optional front and rear diff-lock can be activated on the fly, providing maximum traction in slick underfoot conditions.
https://s7d2.scene7.com/is/image/Caterpillar/CM20180731-51702-59535

Operators will Enjoy All Day comfort with a new multi-function joystick, increased leg room, improved pedal positioning, easier entry/exit and optional speed sensitive ride control. The minimal engine overhang provides excellent rear and corner visibility, making the 903D easy to operate in confined areas.
https://s7d2.scene7.com/is/image/Caterpillar/CM20180731-53978-57920

Configure the 903D for success with new options such as engine and ground speed control, ideally suited for hydro-mechanical work such as using a broom. With the addition of a Worktool Electrical Harness option, you can now run more tools than ever before. Two loader linkage options, standard and high lift, provide either improved capacity or improved lift height based on your application.
https://s7d2.scene7.com/is/image/Caterpillar/CM20180731-58248-24116

Fully opening rear hood allows easy access to the engine compartment featuring side-by-side coolers and transparent fuel/water separator with optional engine air precleaner and radiator screen for high debris applications. New rear tie down locations under the machine allow for easier transport, while a new engine oil fill location allows for easier access during engine oil changes.
Maximum Gross Power
42hp
Engine Model
Cat C2.4*
Gross Power
42hp
Net Power – 2,200 rpm – SAE J1349 R-ing
40hp
Net Power – 2,200 rpm – ISO 9249 R-ing
40hp
Bore
3.4in
Stroke
4in
Displacement
147in²
Note
*Engine meets U.S. EPA Tier 4 Final emission standards.
Operating Weight
9414lb
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
Bucket Capacities – General Purpose
0.6 m3 (0.8 yd3)
Bucket Capacities – Light Material
1.0 m3 (1.3 yd3)
Travel Speed
12.4mile/h
Main Relief
3481psi
3rd Auxiliary Flow
14gal/min
Hydraulic Cycle Time – Lower, Float
2.4s
Hydraulic Cycle Time – Lift
4.4s
Hydraulic Cycle Time – Dump
0.7s
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Cooling System
3gal (US)
Fuel Tank
11.4gal (US)
Hydraulic System
6.3gal (US)
Engine Oil
2.4gal (US)
Cab Height
8.25ft
Ground Clearance
10in
Wheel Base
6.42ft
Overall Length – With Bucket*
15.75ft
Reach at Maximum Dump Height*
2.33ft
Dig Depth
6in
Maximum Dump Height*
7.5ft
Load Over Height
9.17ft
Hinge Pin at Maximum Height
10.08ft
Departure Angle – Degrees
30°
Overall Length – With Forks
17.08ft
Reach – Ground Level
2.67ft
Maximum Reach
4.5ft
Fork Depth Above Ground
2in
Fork Height at Maximum Reach
4.67ft
Maximum Fork Height
9.83ft
Fork Reach at Maximum Height
2ft
Turning Radius – Over Bucket*
13.17ft
Turning Radius – Inside Tire**
5.92ft
Width – Over Bucket*
5.83ft
Tire Gauge
4.33ft
Machine Width**
5.58ft
Articulation Angle
40°
Steering Angle
80°
Dump Angle at Maximum Height
40°
Note (1)
*Vary with bucket size.
Note (2)
**Vary with tire size.
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Cab Height
8.25ft
Ground Clearance
10in
Wheel Base
6.42ft
Overall Length – With Bucket*
16.17ft
Reach at Maximum Dump Height*
2.42ft
Dig Depth
8in
Maximum Dump Height*
8ft
Load Over Height
9.67ft
Hinge Pin at Maximum Height
10.58ft
Departure Angle – Degrees
30°
Overall Length – With Forks
17.58ft
Reach – Ground Level
3.25ft