3412C Fire Pump

Cat® 3412C Fire Pump

Overview

Cat® 3412C Industrial Diesel Fire Pump Engines, with ratings: 476-551 kW (638-739 hp) @ 1750-2100 rpm, are non-certified and are available for global non-regulated areas. They are not FM Approved and not UL Listed. Starting on demand is a must for a fire pump engine – always. Cat® fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.

Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
World-class Product Support Offered Through Global Cat Dealer Network
  • Scheduled maintenance, including SOSSM sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
World-class Product Support Offered Through Global Cat Dealer Network
  • Scheduled maintenance, including SOSSM sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

Power Rating

Minimum Power
638.0bhp
Maximum Power
739.0bhp
Rated Speed
1750-2100 rpm
Minimum Power
638HP
Maximum Power
739HP
Rated Speed
1750-2100 rpm

Emission Standards

Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed

General

Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
14.5:1
Rotation (from flywheel end)
Counterclockwise
Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Bore
137.2 mm (5.4 in)
Stroke
152.4 mm (6.0 in)
Displacement
27 L (1648 in³)
Aftertreatment
-
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
14.5:1
Rotation from Flywheel End
Counterclockwise
Bore
5.4in
Stroke
6in
Displacement
1648in³

Engine Dimensions - Approximate

Height
1413.2 mm (55.6 in)
Length
1999.8 mm (78.7 in)
Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
2579 kg (5686 lb)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
5686lb
Length
78.7in
Height
55.6in

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Air cleaner, regular duty with service indicators
    • Turbocharged
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
    • Heat exchanger installed
    • Expansion tank
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor control
    • Hydra-mechanical governor
  • Exhaust System
    • Exhaust manifold
    • Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
  • Flywheels & Flywheel Housings
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Primary fuel filter
    • Fuel priming pump
  • Instrumentation
    • Instrument panel, LH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Water temperature gauge
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler in valve cover and dipstick, both RH
    • Lube oil filter
    • Rear sump oil pan
  • Mounting System
    • Supports
  • Power Take Off
    • Power take-off (PTO) flywheel stub shaft
  • Protection System
    • Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
  • Starting System
    • 24 volt, LH electric starting motor
    • Jacket water heater (6 kW, 240-480 volt)
  • General
    • Paint: Firepump Red
    • Vibration damper and guard
    • Lifting eyes

Optional Equipment:

See how 3412C compares against frequently compared products

3412C Diesel Fire Pumps

Bore
137.2 mm (5.4 in)
Stroke
152.4 mm (6.0 in)
Selected Model

C18 Diesel Fire Pumps

Bore
145 mm (5.71 in)
Stroke
183 mm (7.2 in)
View Full Specs

3406C Diesel Fire Pumps

Bore
137.2 mm (5.4 in)
Stroke
165.1 mm (6.5 in)
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials