CM43C (Inline)

Diesel Generator Sets
Diesel Generator Sets (181)

Overview

Caterpillar electric power stands for reliable energy supply. Especially during the energy system transformation, Cat generator sets close the energy gap caused by renewable energy source such as wind and photo voltaic. Short ramp up time, low operating costs and rapid maintenance times ensures a high availability according to the need of our customers. Combined heat /cool and power solutions allow our customers to maximize the efficiency and earnings paired with low emissions. Wherever power is needed around the globe, Caterpillar is able to support you with the best products and services to maximize your profit.

Reliable Operation
  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
Control & Monitoring
  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system
Ease Of Installation
  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting
Ease Of Operation
  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available
Intelligent Simplicity
  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
Ease Of Maintenance
  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls
Fuel
  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
Emissions
  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available
Expertise & Experience
  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)
Reliable Operation
  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability
Control & Monitoring
  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system
Ease Of Installation
  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting
Ease Of Operation
  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available
Intelligent Simplicity
  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time
Ease Of Maintenance
  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls
Fuel
  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3
Emissions
  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available
Expertise & Experience
  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)

Generator Set Specifications

Minimum Rating
5520 kWe
Maximum Rating
8290 kWe
Emissions/Fuel Strategy
(WB) Cert stage 1 and 2
Voltage
3000 to 13800 Volts
Frequency At Speed
50 Hz @ 500 / 60 Hz @ 514
Duty Cycle
Prime, Continuous
Ready To Accept Loads (Preheated/Vented)
40 s
Normal Ramp Up To 100% Load
95 s
Emergency Ramp Up 10% To 100% Load
35 s
Genset Efficiency Up To
47.80%

Engine Specifications

Engine Model
CM43C Inline, 4-stroke-engine
Bore
16.93in
Stroke
24.02in
Aspiration
Turbocharged-aftercooled
Engine Rating Range
5640 - 8460 kW
Configuration
6,7,8,9 cylinder
Fuel Type
Diesel oil / heavy fuel oil (HFO) / crude oil
Swept Volume
5406in³
Mean Effective Pressure Up To
370psi
Specific Fuel Oil Consumption (WB I) Up To
0.381Ib/kWh
Specific Fuel Oil Consumption (WB II) Up To
0.384Ib/kWh
Specific Lube Oil Consumption
0.001Ib/kWh

Generator Set Dimensions

Length - Minimum
480in
Length - Maximum
569in
Width - Minimum
134in
Width - Maximum
134in
Height - Minimum
247in
Height - Maximum
262in
Dry Weight - Genset (minimum)
392422lb
Dry Weight - Genset (maximum)
529109lb

Standard/Optional Features

Standard Equipment:

  • Fuel System
    • Gas valve unit (GVU) (only dual fuel (DF) and gas)
    • Engine ventilation module (only dual fuel (DF) and gas)
    • Separator module
    • Pre-pressure module
    • Circulation module
    • Ignition fuel oil module (only dual fuel (DF))
  • Lubricating Oil System
    • Piping interface module
    • Combined module: cooling water system and lube oil system
    • Lube oil separator module
  • Cooling Water System
    • Combined module: see lube oil system
    • Piping interface module
    • Cooling water system with radiators
  • Starting System
    • Starting air compressor module
    • Starting air receiver module
  • Combustion Air System
    • Air filter - pocket
    • Air filter - pulse
    • Air filter - oil bath
  • Exhaust System
    • Exhaust gas silencer
    • Exhaust gas ventilation module (only dual fuel (DF) and gas)
    • Selective catalytic reduction (SCR) system
    • Oxidation catalytic (Oxicat) converter system
  • Control & Monitoring System
    • Local control panel (LCP)
    • Engine monitoring package
    • Gas leak detection per cylinder (only dual fuel (DF) and gas)
    • Motor control center module (MCC)
    • Local data panel (LDP) / generator control panel (GCP)
  • Mounting System
    • Elastic mounting - genset/engine

Optional Equipment:

Take The Virtual Product Tour To Explore The Features And Benefits of the CM43C (Inline)

See how CM43C Inline compares against frequently compared products

CM43C Inline Diesel Generator Sets

Engine Model
CM43C Inline, 4-stroke-engine
Voltage
3000 to 13800 Volts
Maximum Rating
8290 kWe
Selected Model

C1.1 (50 Hz) Diesel Generator Sets

Engine Model
C1.1, In-line 4 4-cycle diesel
Voltage
110 to 415 Volts
Maximum Rating
9.5 kVA
View Full Specs

C1.1 (60 Hz) Diesel Generator Sets

Engine Model
C1.1, In-line 4, 4-cycle diesel
Voltage
110 to 480 Volts
Maximum Rating
8.8 ekW
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »