3512B Diesel Generator Set

Caterpillar is leading the power generation market with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote
Bore
6.69 in
Displacement (HD)
3573.55 in3
Stroke (HD)
8.46 in
Aspiration
TA

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Bore
6.69in
Displacement (HD)
3573.55in3
Stroke (HD)
8.46in
Aspiration
TA
Fuel System
Electronic Unit Injection
Engine Model
3512B TA, V-12, 4-Stroke Water-Cooled Diesel
Displacement - Std
3161.03in³
Stroke - Standard
7.48in
Compression Ratio
14.0:1 Std 15.5:1 HD
Governor Type
Adem™3
Aspiration
TA
Fuel System
Electronic Unit Injection
Bore
6.69in
Displacement - HD
3573.55in³
Stroke - HD
8.46in

Generator Set Specifications

Minimum Rating
1320 kVA
Maximum Rating
1875 kVA
Voltage
220 to 13800 Volts
Frequency
50 Hz
Speed
1500 RPM

Generator Set Configurations

Emissions/Fuel Strategy
Low Fuel Consumption, Low Emissions

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Air cleaner; single element canister type with service indicator
  • Control Panel
    • EMCP4.2 controls including: Emergency stop pushbutton
    • EMCP4.2 controller including:
    • 24-volt DC operation
    • Environmental sealed front face
    • Text alarm / event descriptions
    • Generator mounted - rear facing
    • Controls:
    • Speed adjust
    • Auto / start / stop control
    • Engine cool-down timer
    • Engine cycle crank
    • Alarm acknowledge
    • Lamp test
    • True RMS AC metering, 3-phase, +/-2% accuracy
    • Digital indication for:
    • RPM
    • DC volts
    • Operating hours
    • Oil pressure (psi, kPa or bar)
    • Coolant temperature
    • Volts (L-L & L-N)
    • Frequency (Hz)
    • Amps (per phase & average)
    • Power Factor (per phase & average)
    • kW (per phase, average & percent)
    • kVA (per phase, average & percent)
    • kVAr (per phase, average & percent)
    • kW-hr (total)
    • kVAr-hr (total)
    • Warning/shutdown with common LED indication of shutdowns for:
    • Low oil pressure
    • High coolant temperature
    • Overspeed
    • Emergency stop
    • Failure to start (overcrank)
    • Low coolant temperature
    • Low coolant level
    • Programmable protective relaying functions:
    • Generator phase sequence
    • Over/Under voltage (27/59)
    • Over/Under Frequency (81 o/u)
    • Reverse Power (kW) (32)
    • Reverse Reactive Power (kVAr) (32RV)
    • Overcurrent (50/51)
    • Communications
    • Customer data link (Modbus RTU)
    • Accessory module data link
    • Serial annunciator module data link
    • 6 programmable digital inputs
    • 4 programmable relay outputs (Form A)
    • 2 programmable relay outputs (Form C)
    • 2 programmable digital outputs
  • Cooling System
    • JWAC.
    • Radiator fan and fan drive
    • Fan and belt guards.
    • Coolant drain line with valve
    • Coolant level sensors. (Not included with packages without radiator)
    • Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
  • Exhaust
    • Dry Exhaust Manifold
    • Flanged faced outlet(s)
  • Fuel System
    • Secondary fuel filters
    • Fuel cooler; not included with packages without radiator
    • Flexible fuel lines - shipped loose
    • Fuel priming pump
  • Generators And Attachments
    • 3 phase brushless, salient pole
    • 6 lead
    • Generator set packages include: Regulator (CDVR)
    • Caterpillar's Digital Voltage Regulator (CDVR) includes:
    • Reactive droop capability
    • 3 Phase voltage sensing
    • KVAR/PF modes
    • RFI suppression
    • Min / max exciter limiter
    • Exciter diode monitor
    • LV:
    • Random wound
    • Internal Excitation
    • NEMA Class H insulation
    • Class H temperature rise at 40C ambient (125C prime/150C standby)
    • Winding temperature detectors
    • Busbar connections, top center mounted, top cable entry
    • 50 Hz models: IEC standard hole pattern
    • Note: 1800 frames are form wound, permanent magnet, with winding temp detectors
  • Governing System
    • Woodward 2301A isochronous governor
  • Lube System
    • Lubricating oil
    • Gear type lube oil pump
    • Integral lube oil cooler
    • Oil filter, filler and dipstick
    • Oil drain lines and valve
    • Fumes disposal
  • Mounting System
    • Rails - engine/generator/radiator mounting
    • Rubber anti-vibration mounts (shipped loose)
  • Starting / Charging System
    • 24-volt electric starting motor
    • Battery and battery rack w/cables
    • Battery disconnect switch
  • General
    • Paint - Caterpillar Yellow with high gloss black rails & radiator
    • RH Service
    • Flywheel and Flywheel housing-SAE No. 00
    • SAE Standard Rotation

Optional Equipment:

  • Air Inlet System
    • Dual Element air cleaners
    • Remote air inlet adaptors
    • Air Inlet protection
  • Circuit Breakers
    • Optional busbar power connections
    • Breaker harnesses
    • Center posts busbars
    • Cable entry options
    • Controls packaging - Enclosures
    • EMAX circuit breakers
    • 2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated circuit breakers
    • 2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated circuit breakers
    • Busbar connections
    • EMAX breakers connections
  • Control Panels
    • EMCP 4.3
    • EMCP 4.4
    • Customer connection mounting locations
    • Annunciator Modules
    • Governors
    • Mounting Group - External Box Clips
    • Auxiliary Boxes
    • Customer Interface Options
    • Generator Temperature Monitoring
    • Remote speed adjust
    • Vandle proof panel door
    • Local PC monitoring
    • Ground (Automatically selected)
  • Cooling System
    • Optional radiator arrangements
    • Water level switch gauges
    • Heat exchangers
  • European Certifications
    • European Union Certification
    • EU declaration of conformity
    • Eurasian conformity (EAC) mark
    • European directive genset, DoI (Declaration of Incorporation)
  • Exhaust System
    • Mufflers
    • Muffler mounting kits
    • Flexible fittings
    • Through-wall installation kit
  • Fuel System
    • Primary fuel filter
  • Generators And Attachments
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, internal excitation, No. of leads = 6, pitch= 0.6667
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, permanent magnet, No. of leads = 6, pitch= 0.6667
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, form wound, permanent magnet, No. of leads = 6, pitch= 0.6667
    • Generator conversion
    • Space heater
  • Instrumentation
    • Pyrometer and thermocouples
  • Lube System
    • Oil level Reg-1 shallow pan
    • Electric prelube pumps
    • Manual prelube sump pumps
  • Mounting System
    • Spring-type vibration isolator
    • IBC vibration isolators
  • Protection System
    • Explosion relief valve
  • Special Tests / Reports
    • Neutral grounding connection
    • Neutral ground-LV
    • PGS test report @ 1.0 power factor
    • PGS test report @ 0.80 power factor
    • IBC seismic certifications
  • Starting / Charging Systems
    • 10 Amp battery chargers
    • 20 Amp battery charger
    • Oversize battery set
    • 24 Volt dual electric starting motor
    • Ether starting aid
    • Jacket water heaters
  • General
    • Engine barring group