C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote
Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Minimum Rating
455 ekW
Maximum Rating
600 ekW

Videos not available for this product.

Product Specs

Engine Specifications

Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Engine Model
C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
145 mm (5.71 in)
Displacement
18.13 L (1106.36 in3)
Stroke
183 mm (7.2 in)
Compression Ratio
14.5:1
Governor Type
Adem™A4
Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Fuel System
Electronic unit injection

Generator Set Specifications

Minimum Rating
455 ekW
Maximum Rating
600 ekW
Voltage
480 Volts
Frequency
60 Hz
Speed
1800 RPM

Generator Set Configurations

Emissions/Fuel Strategy
U.S. EPA Tier 4 Final

Standard/Optional Features

Standard Equipment:

  • Exhaust System
    • Exhaust manifold; dry
  • Fuel System
    • Primary fuel filter w/integral water separator & secondary filter
    • Fuel cooler
    • Fuel priming pump
    • Flexible fuel lines
    • Engine fuel transfer pump
  • Governing System
    • Cat Electronic Governor (ADEM A4)
  • Lube System
    • Oil cooler
    • Lubricating oil
    • Oil filter and dipstick
    • Oil drain lines with valve; piped to edge of base
    • Fumes disposal; piped to front of radiator
  • Protection System
    • Safety shutoffs for: Higher water temperature - Overspeed - Low oil pressure
  • Cooling System
    • Coolant drain line with valve; terminated on edge of base
    • Fan and belt guards
    • Coolant Level Sensor
    • Thermostats and housing, full open temperature 92 deg C (198 deg F)
    • Coolant level sight gauge.
    • Jacket water pump, gear driven, centrifugal
    • Caterpillar Extended Life Coolant
  • Starting/charging
    • 24-volt electric starting motor
    • 24V, 45 amp charging alternator.
  • General
    • Paint, Caterpillar yellow
    • Vibration damper
    • Parts book
    • Operation and maintenance manual pack and OMM Storage Compartment
  • Control System
    • EMCP 4.2
    • Controls include: Run / auto / stop control - Speed adjust - Voltage adjust - Engine cycle crank - Emergency stop pushbutton
    • Digital indication for: rpm - DC volts - operating hours - Oil pressure (psi, kPa or bar) - Coolant temperature (C or F) - Volts (L-L & L-N), frequency (Hz) - Amps (per phase & average) - Power factor (per phase & average) - kW (per phase & average) - kVA (per phase & average) - kVAr (per phase and average) - kW-hr (total) - kVAr-hr (total)
    • Warning / Shutdowns with common LED indication of shutdowns for: Low oil pressure - high coolant temperature - Overspeed - Emergency stop - Failure to start (overcrank) - Low coolant temperature - Low coolant level
    • Programmable protective relaying functions: Generator phase sequence - Over / Under voltage (27/59) - Over / Under frequency (81 o/u) - Overcurrent (50/51)
    • Programmable Input / Output: 2 programmable digital inputs - 2 programmable relay outputs (Form A) - 2 programmable relay outputs (Form C)
    • Communications: Customer data link (RS485 Modbus RTu) - Serial annunciator module data link for local and remote annunciator IVR - Integrated Voltage Regulation (Digital) - EM10 Excitation Module
    • Control panel mounting location
    • Local annunciator
    • Remote annunciators
    • Control panel options: Dust proof control panel - volt free contact - Device server - Ground fault relay
    • Optional external analog input
    • Breaker box mounting location
    • Suitable for use as service equipment label
    • Separation plate
  • Generator And Attachments
    • Brushless, self-excited 2/3 pitch, random wound.
    • IP23 Protection
    • Insulation Class H and temperature rise
    • Power center, IP22 bottom cable entry
    • Segregated low voltage (AC/DC) wiring panel
    • AREP generator
    • CIP - generators
  • Air Inlet System
    • Single element air filter
    • Air cleaner - Single element
    • Air cleaner - Heavy duty
  • Extended Service Coverage
    • Silver, Gold and Platinum coverage
  • Circuit Breakers
    • 3 Pole 100% rated

Optional Equipment:

  • Control System
    • EMCP 4.4
    • Control panel mounting
    • Local annunciator
    • Remote annunciators
    • Dust proof control panel
    • Volt free contact
    • Device server
    • Ground fault relay
    • Optional external analog input
    • Breaker box mounting location
    • Separation plate
    • Remote E-stop button
  • Generators And Attachments
    • AREP Generator
    • CIP generators
    • Generator mounting and duct plate
    • Space heater
  • Air Inlet System
    • Single element air filter
    • Dual element air cleaner
  • Certifications
    • IBC certification wind load
    • Certificate of compliance
  • Circuit Breakers
    • Package mounted single circuit breakers
    • Motorized single circuit breaker
    • Dual breakers first circuit breaker (CB1) LS/I package mounted
    • Dual breakers first circuit breaker (CB2) LS/I package mounted
    • Auxiliary contacts
    • Neutral bars
    • Current transformers
    • Power cables
  • Cooling System
    • Standard radiator
    • Aftertreatment guard
  • Enclosures
    • Sound attenuated enclosures
  • Exhaust System
    • Exhaust flexible fittings
    • Flange kits
  • Fuel System
    • 660 gallon base tank
  • Generator Attachments
    • Permanent magnet generator
  • Mounting System
    • Standard base Wide
    • Optional CB shroud
    • Locking fuel fill
    • 5 gallon spill containment
    • Overfill prevention valve
  • Starting / Charging System
    • 10 Amp dual battery charger
    • Battery disconnect switch
    • Jacket water heater
    • Shore power control group
  • Tests
    • PGS test report @ 1.0 power factor
    • PGS test report @ 0.8 power factor
    • Generator test report
    • 4 Hour factory test (un-witnessed)