Home / Power Systems / Electric Power / Power Grid Stabilization (PGS) Heavy Duty mobile module

Power Grid Stabilization (PGS) Heavy Duty mobile module

Electric Power

Electric Power (350)

Request a Quote

Overview

The Cat® PGS Heavy Duty mobile module is a scalable, rapidly deployable energy storage system. The PGS integrates with solar or other renewable sources to provide short duration power when the renewable source is not available or virtual spinning reserve to optimize generator sets efficiency. This system provides temporary backup power to facilities in the event of a power outage.

Download Product Brochure Print

Reliable, Scalable and Mobile

Factory prepackaged and tested

Pre-engineered mobile containeron trailer with batteries, inverter, isolation transformer and other equipment installed.
Multiple energy storage systems may be paralleled up to 100+MW

Renewable Integration

Designed to work with an array of renewable systems, including solar and wind
Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control

Transient Assist

When used with a generator set, the Cat PGS module will provide reserve power capacity to:

Decrease the transient voltage and frequency dips resulting from the application of large loads.
Enables highly-efficient lean-burn gas gensets to operate in island mode.

Grid Stabilization

Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

High Performance Inverter

Built-in controls for the charging and discharging of the energy storage equipment.
Static VAR compensator.
Four-quadrant output power factor control.
Aautomatic anti-islanding to meet UL 1741 and synchronization back to grid.

Applicable Standards and Certifications

UL Listed to the following standards (certification and mark pending):

UL 9540
UL 1741 SB
CSA C22.2 No. 107.1/16
cULus mark

Declarations (pending):

CE Declaration of conformity
IEC60204-1

Reliable, Scalable and Mobile

Factory prepackaged and tested

Pre-engineered mobile containeron trailer with batteries, inverter, isolation transformer and other equipment installed.
Multiple energy storage systems may be paralleled up to 100+MW

Renewable Integration

Designed to work with an array of renewable systems, including solar and wind
Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control

Transient Assist

When used with a generator set, the Cat PGS module will provide reserve power capacity to:

Decrease the transient voltage and frequency dips resulting from the application of large loads.
Enables highly-efficient lean-burn gas gensets to operate in island mode.

Grid Stabilization

Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

High Performance Inverter

Built-in controls for the charging and discharging of the energy storage equipment.
Static VAR compensator.
Four-quadrant output power factor control.
Aautomatic anti-islanding to meet UL 1741 and synchronization back to grid.

Applicable Standards and Certifications

UL Listed to the following standards (certification and mark pending):

UL 9540
UL 1741 SB
CSA C22.2 No. 107.1/16
cULus mark

Declarations (pending):

CE Declaration of conformity
IEC60204-1

Technical Summary

Application: Transient Assist
Module Type: Heavy Duty mobile Grid Stabilization
Rated Power: 840-1260 kW

Standard/Optional Features

Standard Equipment:

Power Grid Stabilization
- Cat BDP bi-directional power inverter
- Energy storage batteries
- Color HMI touchscreen
- Remote communications via Modbus TCP
- HVAC system to maintain interior temperature
- Liquid / Air cooling
- Isolation Transformer
- Convenience receptacles
- Fire suppression system
- Transport trailer

Optional Equipment:

Take The Virtual Product Tour To Explore The Features And Benefits of the Power Grid Stabilization (PGS) Heavy Duty mobile module

See how Power Grid Stabilization (PGS) Heavy Duty Mobile Module compares against frequently compared products