3516 Offshore Production Engine

Cat 3516 Diesel Fire Pump Engine. Ratings: 1417-1480 bkW (1900-1985 bhp) @ 1460-1750 rpm are non-certified, Not FM Approved, Not UL Listed. They are available for global non-regulated areas.p Engine, 1417-1480 bkW (1900-1985 bhp) @ 1460-1750 rpm. Non-Certified rating. Available for global non-regulated areas.

Request a Quote
Minimum Rating
1900.0 bhp
Maximum Rating
1985.0 bhp
Emissions
Non certified
Bore
6.7 in

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Minimum Rating
1900.0bhp
Maximum Rating
1985.0bhp
Emissions
Non certified
Bore
6.7in
Stroke
7.5in
Displacement
4211.0in3
Aspiration
Turbocharged Aftercooled
Rotation (from flywheel end)
Counterclockwise
Engine Weight - Net Dry
17800lb
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Minimum Rating
1900BHP
Maximum Rating
1985BHP
Emissions
Non certified
Bore
6.7in
Stroke
7.5in
Displacement
4211in³
Aspiration
Turbocharged Aftercooled
Rotation from Flywheel End
Counterclockwise

Dimensions

Length
146.9in
Width
68.7in
Height
74.9in
Length
146.9in
Width
68.7in
Height
74.9in

Capacity for Liquids

Lube Oil System - Refill
107gal (US)
Cooling System - Engine
62gal (US)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels And Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment:

  • Lubrication System
    • Oil level regulator
  • Power Take-off
    • Two sided front housing