G3516B LE Gas Engine

The line of G3500B engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3500B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3508B gas engine. Ratings: 1029 bkW (1380 bhp) @ 1400 rpm are NSPS site compliant capable.

Request a Quote
Minimum Rating
1380.0 bhp
Maximum Rating
1380.0 bhp
Emissions
NSPS Site Compliant Capable
Displacement
4230.0 in3

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Minimum Rating
1380.0bhp
Maximum Rating
1380.0bhp
Emissions
NSPS Site Compliant Capable
Displacement
4230.0in3
Aspiration
Turbocharged-2 Stage Aftercooled
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
183
Oil Change Interval
1000 hr
Stroke
7.5in
Bore
6.7in
Weight - Dry
18520lb
Ignition, Protection
ADEM™ A3
Minimum Rating
1380BHP
Maximum Rating
1380BHP
Emissions
NSPS Site Compliant Capable
Displacement
4230in³
Aspiration
Turbocharged-2 Stage Aftercooled
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
183
Oil Change Interval
1000 hr
Stroke
7.5in
Bore
6.7in

Capacity for Liquids

Cooling System
58.5gal
Lube Oil System (refill)
112.0gal
Cooling System
58.5gal (US)
Lube Oil System - Refill
112gal (US)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Axial flow air cleaners
    • Service indicator
    • Cleanable
  • Cooling System
    • Two-stage charge air cooling:
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Dry exhaust manifolds and turbocharger housings
  • Flywheels And Housings
    • SAE 00 flywheel
    • SAE 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Electronic fuel metering valve
    • Requires 7-50 psig gas supply
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lube System
    • Top-mounted crankcase breathers
    • Oil cooler
    • Oil filter and oil sampling valve
    • Drain valve
    • Turbo oil accumulator
    • API B16.3 approved gas/air-driven pre-lube system
  • Torsional Vibration Analysis
    • Caterpillar provided
  • Mounting
    • Rails
  • Control Panels
    • 4" LCD Advisor display panel
    • Shipped loose
  • Starting System
    • 90 psi TDI starter
    • 150 psi TDI starter
  • Power Take-offs
    • Front housing, two sided
    • Front lower LH accessory drive
  • Protection System — Display/alarm/shutdown
    • Low oil pressure
    • Oil filter differential pressure
    • High fuel or oil temperature
    • Engine oil to engine coolant
    • Differential temperature
    • High coolant temperature
    • Engine speed
    • Engine load
    • Battery voltage
    • Detonation
    • Manifold air temperature
    • Coolant JW inlet/outlet pressure
    • Left turbo inlet temperature
    • Right turbo inlet temperature
    • Cylinder port temperature
  • Protection System — Display Only
    • Service hours
    • Oxygen level
  • General
    • Paint — Cat yellow
    • Dual 23" vibration damper with guard
    • CSA Certification, Class 1 Division 2 Groups C and D

Optional Equipment:

  • Air Inlet System
    • Rectangular air inlet adapter
    • Circular air inlet adapter
  • Charging System
    • Battery Charger 20 amp
  • Connections
    • Mechanical joint assembly
    • Inlet connection
  • Exhaust System
    • Flexible fittings available at first production build
    • Elbows and mufflers
  • Instrumentation
    • Optional interconnect harness
  • Lube System
    • Shipped with lube oil
  • Mounting System
    • Rails
  • Power Take-offs
    • Front stub shaft
  • Literature
    • Options available