Cat® G3304 Industrial Gas Engine
Cat® G3304 Industrial Gas Engine. Rating: 71 bkW (95 bhp) @ 1800 rpm is NSPS site compliant capable with customer-supplied aftertreatment. Some ratings also have standard emission settings available for export only. For specific emission information, please consult your local Cat Dealer.
Request a Quote
Product Specs
General
- Bore
- 121 mm (4.75 in)
- Stroke
- 152 mm (6.0 in)
- Displacement
- 7.0 L (425 in³)
- Aspiration
- Naturally Aspirated (NA)
- Engine Configuration
- Engine - Continuous
- Bore
- 121 mm (4.75 in)
- Stroke
- 152 mm (6.0 in)
- Displacement
- 7.0 L (425 in³)
- Aspiration
- Naturally Aspirated (NA)
- Engine Configuration
- Engine - Continuous
Power Rating
- Minimum Power
- 95.0bhp
- Maximum Power
- 95.0bhp
- Minimum Power
- 95HP
- Frequency
- 1800 rpm
- Maximum Power
- 95HP
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Height
- 1170 mm (46 in)
- Width
- 744 mm (29 in)
- Length
- 1158 mm (46 in)
Engine Dimensions - Approximate
- Weight - Net Dry
- 757 kg (1670 lb)
- Width
- 744 mm (29 in)
- Height
- 1170 mm (46 in)
- Length
- 1158 mm (46 in)
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner
- Air cleaner rain cap
- Service indicator
-
- Control System
-
- Hydra-mechanical governor
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump — gear-driven
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheel & Flywheel Housing
-
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator
- Natural gas carburetor
-
- Ignition System
-
- Altronic V ignition system
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil pan — full sump
- Oil filler and dipstick
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Shutoffs
-
- General
-
- Paint — Cat yellow
- Crankshaft drive pulley
- Lifting eyes
Optional Equipment:
-
- Charging System
-
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
-
- Control System
-
- Vernier and positive locking control
-
- Cooling System
-
- Expansion tank
- Heat exchanger/expansion tank
- Radiator
- Blower fan
- Suction fan
- Belt tightener
- Fan drive
-
- Exhaust System
-
- Flexible fittings
- Elbows
- Flange
- Pipe
- Rain cap
- Mufflers
-
- Ignition System
-
- Altronic III
- CSA shielded ignition
- Wiring harness
-
- Instrumentation
-
- Gauges and instrument panels
-
- Lube System
-
- Lubricating oil
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys
- Auxiliary pump
- Enclosed clutch
- Flywheel stub shaft
- Front stub shaft
-
- Protection System
-
- Mechanical shutoffs
- Gas valves
-
- Starting System
-
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric starting motor
- Battery sets
- Battery cables
- Battery rack
-
- General
-
- Tool set