Cat® G3306 Industrial Gas Engine
Cat® G3306 Industrial Gas Engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with customer-supplied aftertreatment. Some ratings also have standard emission settings available for export only. For specific emission information, please consult your local Cat Dealer.
Request a Quote
Product Specs
General
- Bore
- 121 mm (4.75 in)
- Stroke
- 152 mm (6.0 in)
- Displacement
- 10.5 L (638 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Engine Configuration
- Engine - Continuous
- Bore
- 121 mm (4.75 in)
- Stroke
- 152 mm (6.0 in)
- Displacement
- 10.5 L (638 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Engine Configuration
- Engine - Continuous
Power Rating
- Minimum Power
- 145.0bhp
- Maximum Power
- 211.0bhp
- Frequency
- 1800 rpm
- Minimum Power
- 145BHP
- Maximum Power
- 211BHP
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Height
- 1261 mm (50 in)
- Width
- 978 mm (38 in)
- Length
- 1539 mm (60 in)
Engine Dimensions - Approximate
- Weight - Net Dry
- 948 kg (2090 lb)
- Width
- 978 mm (38 in)
- Height
- 1261 mm (50 in)
- Length
- 1539 mm (60 in)
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner
- Air cleaner rain cap
- Service indicator
-
- Control System
-
- Hydra-mechanical governor
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheels & Flywheel Housings
-
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator
- Natural gas carburetor
-
- Ignition System
-
- Altronic V ignition system
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter
- Oil pan — full sump
- Oil filler and dipstick
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Shutoffs
-
- General
-
- Paint — Cat yellow
- Crankshaft vibration damper and pulley
- Lifting eyes
Optional Equipment:
-
- Charging System
-
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
-
- Control System
-
- PSG Woodward governor
- Vernier and positive locking control
-
- Cooling System
-
- ATAAC conversion
- Aftercooler group
- Expansion tank
- Heat exchanger and expansion tank
- Radiator
- Blower fan for customer supplied radiators
- Suction fan for customer supplied radiators
- Fan drives for customer supplied radiators
- Fan adapter for customer supplied radiators
- Belt tightener
-
- Exhaust System
-
- Flexible fittings
- Elbows
- Flanges
- Pipes
- Rain caps
- Mufflers
-
- Fuel System
-
- Low pressure gas conversion
- Fuel filter
-
- Ignition System
-
- Altronic III
- CSA shielded ignition
- Wiring harness
- Dual timing
-
- Instrumentation
-
- Gauges and instrument panels
-
- Lube System
-
- Lubricating oil
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys and auxiliary pump
- Enclosed clutch and clutch support
- Flywheel stub shaft
- Front stub shaft
-
- Protection System
-
- Mechanical shutoff
- Gas valves
-
- Starting System
-
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric starting motors with start switch installed/ shipped loose
- Starting aids
- Battery sets
-
- General
-
- Tool set