Cat® C13 ACERT™ Industrial Diesel Engine

The Cat® C13 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards. Industries and applications powered by C13 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Request a Quote
Minimum Power
385.0 bhp
Maximum Power
520.0 bhp
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
Rated Speed
1800-2100 rpm

Videos not available for this product.

Product Specs

Power Rating

Minimum Power
385.0bhp
Maximum Power
520.0bhp
Rated Speed
1800-2100 rpm
Minimum Power
385BHP
Maximum Power
520BHP
Rated Speed
1800-2100 rpm

Emission Standards

Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.12 in)
Stroke
157 mm (6.18 in)
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
17.3:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.12 in)
Stroke
157 mm (6.18 in)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
12.5 L (762.8 in³)
Compression Ratio
17.3:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1295 mm (50.98 in)
Width
1186 mm (346.69 in)
Height
1053.8 mm (41.49 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
908.4 kg (2002.7 lb)

Engine Dimensions - Approximate

Height
1053.8 mm (41.49 in)
Length
1295 mm (50.98 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
908.4 kg (2002.7 lb)
Width
1186 mm (346.69 in)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel filter, tertiary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: