Cat® C13 Diesel Engine

The Cat® C13 Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Request a Quote
Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Cooling System Capacity
18.7 L (19.8 qt)
Lube System (refill)
34 L (35.9 qt)
Length
1203-1272 mm (47.2-50.1 in)

Product Specs

General

Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Cooling System Capacity
18.7 L (19.8 qt)
Lube System (refill)
34 L (35.9 qt)
Bore
5.1in
Stroke
6.2in
Displacement
762.8in³
Aspiration
Turbocharged-Aftercooled (TA)
Compression Ratio
17.0:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Engine Configuration
In-Line 6
Bore
130 mm (5.1 in)
Stroke
157 mm (6.2 in)
Displacement
12.5 L (762.8 in³)
Cooling System - Capacity
18.7 L (19.8 qt)
Lube System - Refill
34 L (35.9 qt)
Aftertreatment
DOC+DPF+SCR

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1203-1272 mm (47.2-50.1 in)
Width
933-996 mm (36.74-39.2 in)
Height
1132-1186 mm (44.6-46.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
1143-1350 kg (2520-2976 lb)

Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1053-1077 mm (41.5-42.4 in)
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Diameter
330.2 mm (13 in)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Length
854 mm (33.6 in)
Width
287 mm (11.3 in)
Volume Capacity
48.4 L (51.1 qt)
Weight
19.42 kg (42.8 lb)
Height
551 mm (21.7 in)

Power Rating

Minimum Power
385HP
Maximum Power
520HP
Rated Speed
1800-2100 rpm
Maximum Torque
1756lb-ft @ 1400 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final

Engine Dimensions - Approximate

Weight - Net Dry - Basic Operating Engine Without Optional Attachments
2520lb
Height
1132-1186 mm (44.6-46.7 in)
Length
1203-1272 mm (47.2-50.1 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
1143-1350 kg (2520-2976 lb)
Width
933-996 mm (36.74-39.2 in)
Length
50in
Width
39in
Height
45in

Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
974.8 mm (38.4 in)
Width
958.3 mm (37.7 in)
Height
547.2 mm (21.5 in)
Weight
140 kg (308.6 lb)

Cat Regeneration System Aftertreatment Dimensions - Approximate

Diameter
330.2 mm (13 in)
Height
451.3-654 mm (17.8-25.7 in)
Length
1053-1077 mm (41.5-42.4 in)
Weight
248-259 kg (547-571 lb)
Width
779.8-1069 mm (30.7-42.1 in)

PETU Dimensions - Tier 4 Final, Stage IV Only

Height
551 mm (21.7 in)
Length
854 mm (33.6 in)
Volume Capacity
48.4 L (51.1 qt)
Weight
19.42 kg (42.8 lb)
Width
287 mm (11.3 in)

Passive Regeneration System Aftertreatment Dimensions - Approximate

Height
547.2 mm (21.5 in)
Length
974.8 mm (38.4 in)
Weight
140 kg (308.6 lb)
Width
958.3 mm (37.7 in)

Aftertreatment Dimensions

Length
42in
Width
41in
Height
26in
Weight
571lb

PETU Dimensions - Tier 4 Final Only

Length
33.6in
Width
11.3in
Height
21.7in
Weight
42.8lb
Volume Capacity
51.1qt (US)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Optional Equipment: