Cat® C2.2 Diesel Engine

The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.

Request a Quote
Minimum Power
60 HP
Maximum Power
74 HP
Rated Speed
2800 rpm
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V

Videos not available for this product.

Product Specs

Power Rating

Minimum Power
60HP
Maximum Power
74HP
Rated Speed
2800 rpm
Maximum Torque
199lb-ft @ 1600 rpm

Emission Standards

Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V

General

Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Aspiration
Turbocharged (T) or Turbocharged-Aftercooled (TA)
Compression Ratio
18.0:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Bore
3.3in
Stroke
3.9in
Displacement
135in³
Aftertreatment
DOC+DPF

Engine Dimensions - Approximate

Height
757 mm (29.8 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
242 kg (533.5 lbs)
Length
807 mm (31.7 in)
Width
535 mm (21.0 in)
Length
31.7in
Width
21in
Height
29.8in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
533.5lb

Aftertreatment Dimensions - Approximate

Weight
5.8 kg (12.79 lb)
Diameter
155 mm (6.1 in)
Length
408.4 mm (16.07 in)

Aftertreatment Dimensions

Length
16.1in
Diameter
6.1in
Weight
12.8lb

Standard/Optional Features

Standard Equipment:

  • Control System
    • Alternator 12 volt 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
    • Electronic control unit - chassis mounted
    • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
    • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
  • Flywheels And Flywheel Housing
    • SAE No. 4 standard flywheel housing
    • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
  • Fuel System
    • 2000 bar high-pressure common rail system
    • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
  • Power Take Off (pto)
    • SAE A PTO drive
  • General
    • Cast iron engine block
    • Cast iron exhaust manifold
    • Gradeability 35° continuous
    • Paint: Cat yellow
  • U.s. Epa Tier 4 Final, Eu Stage Iiib Aftertreatment/clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)

Optional Equipment: