3516B Diesel Generator Set with Dynamic Gas Blending

Producing oil and gas is a complex task that requires specialized power generation equipment. Cat 3500 generator sets with Dynamic Gas Blending offer the lowest owning and operating cost by displacing diesel with low cost gas. They are specifically designed for the oilfield and combine decades of experience in diesel and gas engines with the latest electronics to ensure highest performance, optimum dual fuel operation, low emissions, and simplified operator interface.Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.3516B generator set with dynamic gas blending kit. Ratings: 1600 ekW (2000 kVA) @ 50 Hz (1500 rpm).

Request a Quote
Aspiration
Turbocharged-Aftercooled
Bore
6.69 in
Stroke
7.48 in
Displacement
4211.0 in3

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Aspiration
Turbocharged-Aftercooled
Bore
6.69in
Stroke
7.48in
Displacement
4211.0in3
Generator set control
EMCP 4.4
Generator
SR4B
Fuel system
EUI
Maximum Rating
1600 ekW (2000 kVA)
Minimum Rating
1600 ekW (2000 kVA)
Emissions/Fuel Strategy
Non-certified
Manifold Type
Dry
Engine Control and Protection
ADEM A4
Frequency - Speed
50 Hz (1500 rpm)
Aspiration
Turbocharged-Aftercooled
Bore
6.69in
Stroke
7.48in
Displacement
4211in³
Generator Set Control
EMCP 4.4
Generator
SR4B
Fuel System
EUI

Dimensions

Length
260.6in
Width
94.4in
Height
99.5in
Weight
41888.0lb
Length
260.6in
Width
94.4in
Height
99.5in
Weight
41888lb

Capacity for Liquids

Lube oil system (refill)
107.0gal
Cooling system (engine)
62.0gal
Fuel
CNG, LNG, field gas, natural gas with diesel
Lube Oil System - Refill
107gal (US)
Cooling System - Engine
62gal (US)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Aftercooler core — corrosion resistant
    • Air cleaner — regular duty with soot filter
    • Service indicators
    • Flame arrestors
  • Control System
    • ADEM A4 ECU
    • ISM (integrated sensor module) for combustion feedback sensors
    • Exhaust gas temperature sensors
  • Cooling System
    • Radiator cooled - land based
    • Outlet controlled thermostat and housing
    • Jacket water pump — gear-driven
    • Dual outlet
    • Aftercooler cooling pump (SCAC) — gear-driven centrifugal
  • Diesel Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Flexible fuel lines
    • Fuel priming pump
    • Electronically controlled unit injectors
  • Exhaust System
    • Exhaust flexible fitting, adapter and flanges
    • Dual turbochargers with water-cooled bearings
  • Flywheel And Flywheel Housing
    • SAE No. 00
    • SAE standard rotation
  • Gaseous Fuel System
    • Low pressure regulator
    • Electronically actuated fuel control valve
    • Gaseous fuel heater
    • Electronically controlled gas shut-off valve
    • Gas induction nozzles
    • CSA certified gas electronic components
  • Instrumentation
    • Analog gauges
    • EMCP 4.4 control panel
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filter
    • Shallow oil pan
    • Oil pan drain valve
  • Mounting System
    • Oilfield base
    • Heavy-duty land rig inner baseframe — three-point mountto oilfield base
  • Power Take-offs
    • Accessory drive
  • Protection System
    • ADEM A4 ECU monitoring system provides engine protectionstrategies to protect against adverse operating conditions.Selected parameters are customer programmable.
  • Starting System
    • Air starting motor
    • Air silencer
  • General
    • Paint — Cat yellow
    • Vibration damper and guard
    • Lifting eyes
    • Lift and cable tow provisions

Optional Equipment:

  • Air Inlet System
    • Heavy-duty air cleaners and precleaners
    • Remote air inlet adapters
  • Charging System
    • Battery charger
    • Charging alternator
  • Control System
    • Load sharing module
    • Cat digital voltage regulator
    • Governor conversion
    • 2301A load sharing governor
  • Cooling Systems
    • High gloss black folded core radiators and conventional coreradiator
    • Coolant regulator conversions
    • Belt guard, radiator guard
    • Blower fan – engine mounted
    • Fan drive and fan pulley
    • Radiator mounting
    • Water level switch gauge
    • Coolant level sensors
  • Exhaust System
    • Elbows
    • Mufflers
    • Flange and exhaust expanders
  • Fuel System
    • Primary fuel filter
    • Fuel cooler
  • Generator
    • Oilfield spec twin-bearing, close-coupled
  • Generator Attachments
    • Air filter
    • Low voltage extension box
    • Potential transformer
    • Manual voltage control
    • Current droop transformers
    • Cable access box
    • Bearing temperature detectors
  • Instrumentation
    • Customer programmable annunciator
    • Gauges and instrument panels
    • Switches, relays, and contractors
  • Lube System
    • Fumes disposal
    • Oil filter, oil pan accessories
    • Sump pumps
  • Mounting System
    • Oilfield outer base with three-point mount
  • Power Take-offs
    • Front stub shaft
    • Pulleys
  • Protection System
    • Explosion relieve valve, shutoffs
    • Switches and contacts/relays
    • Oil pressure monitors, sensors
  • Starting System
    • Air pressure regulator
    • Starting aids
  • General
    • Tool set
    • Cat data link wire