G3306B Oilfield Gas Generator Set

Production of oil and gas in remote oilfields can be a challenge when utility power is not available. The Caterpillar product line of oilfield gas generator sets provides the ideal solutions for this challenge. Engines are designed to run on low to no-cost well site gas without sacrificing on performance. These generator sets allow customers to significantly reduce fuel cost and avoid the expense and logistics of diesel fuel deliveries. Plus, they are designed to withstand the harsh conditions in the oilfield and feature a heavy-duty construction ideal for loading and unloading operations.Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.G3306B oilfield gas generator set. Ratings: 110 – 135 ekW (138 – 170 kVA) @ 50 and 60 Hz (1500 and 1800 rpm). Configurations available to meet NSPS emission standards in non-attainment areas and configurations available for non-regulated areas.

Request a Quote
Aspiration
Turbocharged-Aftercooled
Bore
4.76 in
Stroke
5.98 in
Displacement
640.0 in3

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Aspiration
Turbocharged-Aftercooled
Bore
4.76in
Stroke
5.98in
Displacement
640.0in3
Generator set control
EMCP 4.3 (4.4 optional)
Generator
SR4B
Maximum Rating
135 ekW (170 kVA)
Minimum Rating
110 ekW (138 kVA)
Emissions/Fuel Strategy
NSPS or non-regulated
Manifold Type
Watercooled
Engine Control and Protection
ADEM A4
Frequency - Speed
50/60 Hz (1500/1800 rpm)
Aspiration
Turbocharged-Aftercooled
Bore
4.76in
Stroke
5.98in
Displacement
640in³
Generator Set Control
EMCP 4.3 (4.4 optional)
Generator
SR4B

Dimensions

Length
145.8in
Width
60.2in
Height
73.1in
Weight
7716.0lb
Length
145.8in
Width
60.2in
Height
73.1in
Weight
7716lb

Capacity for Liquids

Lube oil system (refill)
12.0gal
Cooling system (engine)
5.0gal
Fuel
CNG, LNG, field gas, natural gas
Lube Oil System - Refill
12gal (US)
Cooling System - Engine
5gal (US)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Air cleaner — intermediate duty, dry
    • Air cleaner rain cap
    • Air cleaner service Indicator
  • Cooling System
    • High ambient radiator design for gas fuel applications
    • Side-by-side aftercooler and jacket water core
    • Metal top and bottom tanks
    • Coolant drain
    • Fan and belt guard
    • Coolant level sensor
  • Exhaust System
    • Exhaust manifolds — water cooled
    • Exhaust elbow and flex fitting — 127 mm (5 in)
    • Residential grade muffler
  • Fuel System
    • Gas pressure regulator — requires 82.7-172.4 kPa (12-25 psi) gas
    • Natural gas carburetor
  • Generator
    • Rated for continuous duty — 25% oversize
    • Class H insulation
    • Permanent magnet
    • Random wound
    • 240 VAC space heater
    • Coastal insulation protection
    • IP23 protection
    • Cat Digital Voltage Regulator
  • Control System
    • Electronic governing ADEM A4
    • Electronic diagnostics and fault logging
    • Momentary start/stop logic
    • High temperature braided engine harness with 70-pincustomer connector and service tool connector
  • Lube System
    • Crankcase breather, top-mounted
    • Oil filter, spin-on, left-hand service
    • Dipstick, left-hand service
    • Oil pump — gear-driven
    • Oil cooler
  • Mounting System
    • Heavy-duty welded steel base designed for the oilfield
    • Designed to accommodate a drop-over enclosure
    • Space claims for makeup tank and coalescing filter
    • Base design optimized for loading, transport, and unloading
  • Protection System
    • The following parameters include alarm and shutdown:
  • General
    • Jacket water heater
    • 24V starting motor
    • 24V, 45-amp charging alternator

Optional Equipment:

  • Exhaust System
    • Three-way catalyst
    • Critical grade muffler
    • Muffler mounting structure
  • Fuel System
    • Air-fuel ratio control
    • Coalescing filter, heavy-duty for wellhead gas