C7.1 Generator Set

Cat C7.1 ACERT Generator Set

Overview

Cat® C7.1 Diesel Marine Generator Set has three phase ratings of 50 Hertz at 100, 118, and 150 ekW with heat exchanger cooling that meet U.S. EPA Tier 3 commercial, IMO II, and EU CC2 emissions standards. The C7.1 also has three phase ratings of 60 Hertz at 118, 150, 175, and 175 ekW with heat exchanger cooling that meet U.S. EPA Tier 3 commercial, IMO II, and EU CC2 emissions standards. C7.1 gen set is available in 12 or 24 volt and this compact package is ideal for a wide range of commercial and pleasure craft applications.

Common Rail Fuel System
Variable multi-shot injection combines with a high compression ratio for optimized fuel efficiency and very low smoke operation Excellent fuel economy, optimal combustion, low emissions
Control Panel
Location interchangeable between 3 positions
Common Rail Fuel System
Variable multi-shot injection combines with a high compression ratio for optimized fuel efficiency and very low smoke operation Excellent fuel economy, optimal combustion, low emissions
Injection pressure is independent from load and speed
Injection characteristics optimized for every engine operating point
NOx and soot emissions reduced with amount of reduction dependent on actual engine operating conditions
Control Panel
Location interchangeable between 3 positions

Generator Set Specifications

Minimum Rating
100 ekW (125 kVA)
Maximum Rating
200 ekW (250 kVA)
Frequency
50 Hz or 60 Hz
Speed
1500 rpm (50 hz) or 1800 rpm (60 hz)
Minimum Rating
100 ekW (125 kVA)
Maximum Rating
200 ekW (250 kVA)
Frequency
50 Hz or 60 Hz
Speed
1500 rpm (50 hz) or 1800 rpm (60 hz)
Emissions/Fuel Strategy
EPA Tier 3, IMO II, EU CC2

Generator Set Configurations

Emissions/Fuel Strategy
EPA Tier 3, IMO II, EU CC2

Engine Specifications

Engine Model
In-line 6, 4-Stroke-Cycle Diesel
Aspiration
TA
Bore
4.13in
Stroke
5.3in
Displacement
433.3in3
Governor Type
Electronic
Fuel System
Common Rail Fuel System
Engine Model
In-line 6, 4-Stroke-Cycle Diesel
Aspiration
TA
Bore
4.13in
Stroke
5.3in
Displacement
433.3in³
Governor Type
Electronic

Generator Set Dimensions

Width
37.6in
Height
49.7in
Weight
1652 -1840 kg, 3634-4026 lb
Length
76.2 in/1935 mm (minimum), 83.3 in/2116 mm (maximum)
Width
37.6in
Height
49.7in
Weight
1652 -1840 kg, 3634-4026 lb

Generator Specifications

Pitch
2/3
Number of Leads
12
Insulation
Class H
IP Rating
IP23 Water protection
Voltage Regulator
Solid state

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Open Crankcase Ventilation (OCV) system
    • Turbocharger, jacket water cooled
    • Integrated coolant lines into manifold utilizing EGR circuit
  • Control System
    • Panels available in RH, LH, and rear configurations with a remote mount option
    • Electronic diagnostics and fault logging
    • Electronic governor
    • Electronic Control Module (ECM)
    • SAE J1939 data link Ratings Only
    • Electronic fuel/air ratio control
  • Cooling System
    • Integrated heat exchanger and aftercooler
    • Compact design integral coolant passages
    • Thermostat and housing
    • Jacket Water Heater 120/240V option
    • Auxiliary seawater pump, gear driven
    • Engine mounted heat exchanger, removable tubeBundle (for sea water) (heat exchanger engines only)
    • Engine oil cooler
    • Auxiliary sea water lines
    • Keel cooling
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • 152 mm (6 in) round flanged outlet
    • Dry Elbow/Flange options
  • Flywheels & Flywheel Housings
    • Flywheel Housing, SAE No. 2
    • Flywheel, 134 teeth
    • SAE standard rotation
  • Fuel System
    • Common Rail Fuel System
    • Simplex and Duplex Fuel options
    • Flexible fuel line option
    • Fuel transfer pump, gear driven
  • Generators And Generator Attachments
    • 12 leads
    • 3 phase Brushless
    • Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds
    • 2/3 Pitch
    • Broad voltage band
    • IP23 Water protection
    • Solid state voltage regulator with integral voltage adjustment
    • Class H insulation
    • Generator temperature rise exceeds marine society requirements for 105 C @ 50 C ambient - prime 85 C @ 50 C ambient - prime Connection poles
  • Lube System
    • Crankcase breather
    • Simplex and Duplex options
    • Oil filter, RH service
    • Oil filler, in valve cover and timing case (option)
    • Oil level gauge, RH service
    • Oil pan
    • Oil pan drain, RH`
    • Lubricating oil
    • Engine oil pump (gear driven)
  • Mounting System
    • Skiddable base frame
    • Anti vibration isolators between base and engine-generator
  • Power Take-offs
    • Poly-V groove for alternator drive
    • PTO Shaft Kit (optional)
  • General
    • Torsional vibration damper and guard
    • Paint, Caterpillar yellow
    • Lifting eyes
    • Protective lifting covers
    • Literature
    • Battery disconnect switch
    • Plastic wrap packaging
    • Note: Keel-cooled gen sets do not include the keel cooler(s).
    • Engine is certified to D2/E2 emissions cycles

Optional Equipment:

  • Control System
    • Governor droop kit
  • Exhaust System
    • Dry Elbow
    • Dry Flange
    • Exhaust Temp Sensor
  • Fuel System
    • Flexible Fuel Lines
  • Lube System
    • Dipstick
  • Cooling System
    • Coolant recovery tank
    • Jacket Water Heater
  • Power Take-offs
    • Crankshaft Pulley

Take The Virtual Product Tour To Explore The Features And Benefits of the Cat C7.1 ACERT Generator Set

See how C7.1 ACERT compares against frequently compared products

C7.1 ACERT Marine Generator Sets

Bore
4.13 in
Stroke
5.3 in
Selected Model

C4.4 (Electronic) Marine Generator Sets

Configuration
In-line 4, 4-stroke-cycle diesel
Bore
4.13 in
Stroke
5 in
View Full Specs

C1.5 Marine Generator Sets

Configuration
Inline 3, 4-Stroke Cycle diesel
Bore
3.31 in
Stroke
3.5 in
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »