C9.3 Marine Auxiliary Engine

masthead-innerpage-bg

C9.3 Marine Auxiliary Engine

Overview

C9.3 Marine Auxiliary Engine

Sorry, there aren’t current any videos for this product.

Sorry, there aren’t current any spinsets for this product.

Sorry, there aren’t current any deals for this product.

  • Electronic control system provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds
  • Common rail fuel system enables optimum combustion and low emissions
  • RH and LH locations service options for fuel and oil filters, as well as dipstick location for easily accessible service
  • Compatible with Cat® displays
  • Available remote-mounted display panel with start, stop, and engine diagnostics
  • 12V or 24V electrical system
  • Certified by all marine classification societies
  • Utilizes SCR technology enabling IMO III emissions compliance while lowering operational costs
Power Range
218 bkW – 325 bkW
Frequency
50 / 60
Emissions
IMO II, IMO III, U.S. EPA Tier 3, China Stage II
Rated Engine Speed
1500 / 1800 rpm
Bore
4.5in
Stroke
5.8in
Aspiration
Turbocharged – Aftercooled
Displacement
567.5in³
Rotation from Flywheel End
Counterclockwise
Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Cooling
Heat exchanger and separate or combined keel cooled options
Oil Change Interval
500 hours
Governor
Electronic
Flywheel Housing
SAE No. 1 (113 teeth)
Refill Capacity
Lube Oil System w/oil filter change: 24.5 L (6.5 gal)
Width – Engine
38.5in
Height
43in
Length – Engine
57.2in
Engine Dry Weight – Approximate
2083 – 2474
  • Standard Equipment
    • Vibration damper and guard
    • Engine oil cooler
    • Thermostats and housing
    • Gear-driven sea water pump (self-priming)
    • Electronic control system
    • Water-cooled turbocharger and exhaust manifold
    • Primary fuel filters
    • Common rail fuel system
    • Corrosion-resistant Sea water aftercooler
    • Shell and tube jacket water heat exchanger
  • Optional Attachments
    • Electric fuel priming pump
    • Fuel cooler
    • Transmission gear oil cooler (engine mounted for HEX)
    • Additional engine and transmission sensor packages
    • Alternators – 24V 70 or 105 amp, 12V 110 amp
    • Electric starting motors – 12V or 24V
    • Instrument panels
    • PTO Drives – V-belt pulley stack, stub shaft
    • Double wall fuel rail
    • Duplex fuel and oil filters
    • Air starting motor
    • Closed crankcase ventilation
    • Dual electric starting motors or combined electric/air

Take the virtual product tour

Explore the features and Benefits
of the C9.3 Marine Auxiliary Engine

Compare products

See how C9.3 Marine Auxiliary Engine compares against frequently compared products

Compare our equipment

Translate »