contact us
call us
locations
A41 Auger
Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.
Request a Quote
Product Specs
Dimensions
- Drive Shaft Torque @ Max Pressure
- 3040lb ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- Mini Hydraulic Excavator
- Required Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400) psi
- Overall Width w/ bracket
- 12in
- Overall Drive Unit Height
- 35in
- Housing Diameter
- 11in
- Swing Range (fore/aft)
- 72 degrees
- Hex Output Shaft Size
- 2in
- Drive Unit Weight (w/o Bits)
- 205lb
- Effective Displacement
- 15.26in
- Bit Speed at Maximum Flow
- 71 rpm
- Required Hydraulics
- Standard Flow
- Overall Length w/ bracket
- 11in
- Overall Drive Unit Height
- 35in
- Swing Range (L/R)
- 76 degrees
- Drive Gear Reduction
- 4.5:1
- Hex Output Shaft Size
- 2in
- Drive Shaft Torque at Maximum Pressure
- 3038.8lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- 3 Ton Mini Excavator Pin On
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400 psi)
- Overall Width - With Bracket
- 11.8in
- Required Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Required Hydraulics
- Standard Flow
- Drive Gear Reduction
- 4.5:1
- Overall Length - With Bracket
- 11.1in
- Swing Range (L/R)
- 76 degrees
- Optimal Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Overall Height
- 34.4in
- Weight
- 202.8lb
- Motor Displacement
- 15.26in³