D6N Medium Track-Type Tractor

D6N Track-Type Tractor

Overview

The latest in the line of Cat D6N dozers combines well-known versatility with a range of technology features to give you more job site productivity than ever before. A new transmission with lock-up clutch torque converter delivers ease of operation, increased net power, plus a 10-15 percent improvement in fuel efficiency. The D6N has the weight and horsepower you want for dozing applications and the balance and stability you need for finish grading – all in one easy-to-transport machine.

Operator Environment
Implement and Steering Controls
  • Machine direction, forward/reverse shifting and gear selection are all combined into a single tiller control located on the left armrest.
  • Standard Electro-hydraulic controls are designed for low effort. Operators have precise control of the blade and rear attachments, as well as the functions of a 6-way VPAT blade.
Power and Performance
Engine A Cat C7.1 ACERT engine gives you the power and reliability you need. Improved fuel economy over the previous model and efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.
Equipped for the Job
Undercarriage Elevated sprocket helps protect major components from harsh impacts and provides a modular design for convenient service.
Cat Connect Technologies
LINK Technologies LINK technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink® software.
Emissions Technology
Aftertreatment Technologies To meet the additional 80 percent reduction in NOx emissions required by Tier 4 Final/Stage IV emission standards, Caterpillar engineers added Selective Catalytic Reduction (SCR) to the already proven aftertreatment solution.
Serviceability and Customer Support
Ease of Service The D6N is designed to help you get routine service done quickly and efficiently so you can get to work.
Special Arrangements
D6N WH Waste Handler
        
  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  •     
  • Bottom and final drive guarding help prevent debris from wrapping around or damaging vital components.
  •     
  • The cooling system is designed for high debris environments, with easy access for cleanout.
Operator Environment
Implement and Steering Controls
  • Machine direction, forward/reverse shifting and gear selection are all combined into a single tiller control located on the left armrest.
  • Standard Electro-hydraulic controls are designed for low effort. Operators have precise control of the blade and rear attachments, as well as the functions of a 6-way VPAT blade.
  • A variable throttle control dial lets you use preset engine speeds, or select Enhanced Auto Shift modes.
  • Bi-directional shift allows you to automatically select the desired forward/reverse speeds or a custom setting.
  • Selectable Electro-Hydraulic Maps set the implement response levels – fine, medium, coarse – to match operator preferences and tailor the machine to individual applications.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments.
Power and Performance
Engine A Cat C7.1 ACERT engine gives you the power and reliability you need. Improved fuel economy over the previous model and efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.
Cooling System A single plane design makes cleanout easier, and durable aluminum bar plate construction gives you superior heat transfer and corrosion resistance. A swing-out door provides easy access for cleanout.
Lock-Up Clutch Transmission controls will automatically select the drive mode best suited to your application, providing increased productivity and efficiency.* The new transmission with a lock-up clutch torque converter gives you the performance of direct drive with the ease of operation of power shift.
Enhanced Auto Shift Standard Enhanced Auto Shift helps you save fuel by automatically upshifting/downshifting to maintain the most efficient gear based on load. Three different settings – 3-speed, 6-speed and fine adjustment mode – allow you to optimize tractor performance to match material and job site conditions.
Differential Steering Differential Steering maintains full power to both tracks for best-in-class turning, even with a full blade load. When one track speeds up, the other slows down an equal amount, so you have better maneuverability and faster cycle times. Load capacity, power and speed control are also better when working in soft conditions.
Load Sensing Hydraulics Field-proven system senses the load and continuously adjusts hydraulic power to your blade to maximize efficiency.
Equipped for the Job
Undercarriage Elevated sprocket helps protect major components from harsh impacts and provides a modular design for convenient service.
Blades Semi-Universal and Straight blades are designed with a strong box section to stand up to the most severe applications. Heavy moldboard construction, hardened bolt-on cutting edges and end bits add strength and durability.
Rear Implements To help you match your D6N to the task at hand, you can outfit your D6N with a multi-shank ripper, winch or drawbar.
Cat Connect Technologies
LINK Technologies LINK technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink® software.
Product Link™/VisionLink Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.
GRADE for Dozers Cat Connect GRADE technologies help you hit target grade faster and more accurately. Finish jobs in fewer passes, and with less operator effort, saving you time and helping you increase profit.
Emissions Technology
Aftertreatment Technologies To meet the additional 80 percent reduction in NOx emissions required by Tier 4 Final/Stage IV emission standards, Caterpillar engineers added Selective Catalytic Reduction (SCR) to the already proven aftertreatment solution.
Diesel Exhaust Fluid Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently refilled when you refuel. The DEF fill nozzle is located next to the fuel tank, with easy access via a rear step. A tone will sound (with key on), when the tank is nearly full and a gauge on the dash shows your fluid level. The system is designed to use one tank of DEF for each tank of fuel (1:1 DEF fill ratio). The D6N typically has used DEF at a rate of 2-3 percent of fuel consumption.
Serviceability and Customer Support
Ease of Service The D6N is designed to help you get routine service done quickly and efficiently so you can get to work.
Special Arrangements
D6N WH Waste Handler
        
  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  •     
  • Bottom and final drive guarding help prevent debris from wrapping around or damaging vital components.
  •     
  • The cooling system is designed for high debris environments, with easy access for cleanout.
  •     
  • Specialized air handling features help deliver cleaner air to the machine.
  •     
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
D6N Forestry Arrangement
  • Optional sweeps help protect the cab, top and sides of the machine.
  • Screens give added impact protection to cab windows (ISO 8084).
  • Additional guarding helps protect the underside of the machine from stumps and other heavy debris.
  • The cooling system is designed for high debris environments, with easy access for cleanout.

Ripper

Pocket Spacing
3.3ft
Maximum Penetration - LGP
15.6in
Shank Gauge
6.6ft
Maximum Penetration Force - XL
11600lbf
Maximum Pry-out Force - LGP
38217lbf
Maximum Penetration - XL
20.2in
Weight - With Three Shanks
3444lb
Maximum Clearance Raised - Shank Tip
24.5in
Beam Cross Section
216 mm × 254 mm (8.5 in × 10.0 in)
Overall Beam Width
86.7in
Type
Fixed Parallelogram
Number of Pockets
3
Each Additional Shank
172lb
Maximum Penetration Force - LGP
9667lbf
Maximum Pry-out Force - XL
47480lbf
Shank Section
73 mm × 176 mm (2.9 in × 6.9 in)

Blades

Capacity - XL SU
5.6yd³
Width - XL SU
10.33ft
Capacity - XL VPAT
4.3yd³
Width - LGP VPAT
13.42ft
Capacity - LGP VPAT
5.1yd³
Capacity - LGP VPAT - Foldable
5.1yd³
Width - XL VPAT
10.75ft
Width - LGP VPAT - Foldable
13.42ft

Undercarriage

Shoe Width - XL
24in
Shoes/Side - LGP
46
Track Rollers/Side - XL
7
Grouser Height - XL
2.6in
Grouser Height - LGP
2.2in
Track Rollers/Side - LGP
8
Ground Pressure - LGP*
4.5psi
Track Gauge - XL
74.4in
Track on Ground - XL
102.6in
Ground Contact Area* - LGP
8928in²
Track Gauge - LGP
85in
Ground Contact Area* - XL
5518in²
Ground Pressure - XL*
6.7psi
Shoes/Side - XL
40
Note (1)
*ISO 16754
Track on Ground - LGP
122.4in
Shoe Width - LGP
33.1in
Note (2)
All dimensions with SystemOne undercarriage.
Shoe Width - XL - Fine Grading
24in
Track Gauge - XL - Fine Grading
74.4in
Grouser Height - XL - Fine Grading
2.6in
Track Rollers/Side - XL - Fine Grading
8
Shoes/Side - XL - Fine Grading
46
Ground Contact Area* - XL - Fine Grading
6479in²
Ground Pressure* - XL - Fine Grading
5.8psi
Track on Ground - XL - Fine Grading
122.4in

Weights

Operating Weight - LGP
40446lb
XL VPAT Blade
2341lb
LGP VPAT - Blade
2720lb
Shipping Weight - XL
36153lb
LGP VPAT - Foldable
3287lb
Operating Weight - XL
36943lb
XL VPAT Foldable
2762lb
Multi-Shank Ripper - With 3 Shanks
2959lb
Shipping Weight - LGP
39339lb
XL VPAT Landfill
2912lb
XL SU - Blade
5732lb
LGP VPAT - Landfill
3166lb
Operating Weight
36943lb
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Operating Weight - XL Fine Grading
38162lb
Shipping Weight - XL Fine Grading
37373lb
Shipping Weight - LGP Waste Handler
43642lb
Operating Weight - XL Waste Handler
40818lb
Shipping Weight - XL Waste Handler
40029lb
Operating Weight - LGP Waste Handler
44749lb

Service Refill Capacities

Hydraulic Tank
7.8gal (US)
Final Drive - Each
1.8gal (US)
Cooling System
10.6gal (US)
Fuel Tank
73.2gal (US)
Roller Frames XL/LGP - Each
20/17.5 L (4.3/4.6 gal)
DEF Tank
5gal (US)
Power Train
42.3gal (US)
Engine Crankcase
4.5gal (US)

Transmission

0.7 Forward (EU)
1.6mile/h
1.7 Forward
3mile/h
2.7 Forward
5.2mile/h
0.5 Forward (EU)
1.5mile/h
1.0 Forward (EU)
1.9mile/h
0.5 Forward
1.6mile/h
0.5 Reverse
1.9mile/h
0.7 Forward
1.7mile/h
3.0 Forward
6.1mile/h
2.5 Forward
4.7mile/h
2.0 Forward
3.6mile/h
1.5 Forward
2.7mile/h
0.7 Reverse
2.1mile/h
1.0 Reverse (EU)
2.2mile/h
Maximum Drawbar Pull - 2.0 Forward
44512lbf
2.7 Reverse
6.5mile/h
0.5 Reverse (EU)
1.8mile/h
0.7 Reverse (EU)
1.9mile/h
Maximum Drawbar Pull - 1.0 Forward
71939lbf
1.7 Reverse
3.7mile/h
Maximum Drawbar Pull - 3.0 Forward
25403lbf
2.5 Reverse
5.9mile/h
3.0 Reverse
7.6mile/h
2.0 Reverse
4.4mile/h
1.0 Forward
2.1mile/h
1.5 Reverse
3.4mile/h
1.0 Reverse
2.5mile/h

Winch

Weight*
2814lb
Note (2)
Slow and standard speed winches are available.
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Flange Diameter
19.8in
Drum Width
12.4in
Drum Diameter
10in
Winch and Bracket Length
45.1in
Oil Capacity
19.55gal (US)
Control
Electric
Winch Case - Width
38.4in
Winch Model
PA55
Cable Ferrule Size - O.D. × Length
54 mm × 67 mm (2.13 in × 2.63 in)
Overall Width
38.4in
Winch Drive
Mechanical
Drum Capacity - 22 mm (0.88 in)
288.75ft
Maximum Bare Drum - Line Pull*
69200lb
Maximum Full Drum - Line Pull*
44410lb
Rope Diameter - Recommended
0.875in
Maximum Full Drum - Line Speed
217ft/min
Maximum Bare Drum - Line Speed
141ft/min

Sound and Vibration - Cab

Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when t
Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound expo
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (2)
If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engin

Engine

Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Engine Power - Maximum - At 2,200 rpm - SAE J1995
182HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349
166HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)
180HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
168HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396
178HP
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Displacement
433in³
Bore
4.1in
Stroke
5.3in
Engine Model
Cat C7.1
Flywheel Power
166HP

Hydraulic Controls - Pump

Ripper Cylinder Flow
33.5gal/min
Pump Output - Implement
33.5gal/min
Pump Output - Steering
36.2gal/min
Angle Cylinder Flow - VPAT
33.5gal/min
Lift Cylinder Flow
33.5gal/min
Tilt Cylinder Flow
23.8gal/min

Hydraulic Controls - Pressures

Maximum Implement Operating Pressure
3640psi
Maximum Steering Operating Pressure
6556psi

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Sustainability - Sound and Vibration Levels

Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006
0.5 m/s2 (1.6 ft/s2)
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6
Less Than 0.7
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001
2.5 m/s2 (8.2 ft/s2)
Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006
85.5dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008
76dB(A)
Sound Levels - Maximum Sound Power Level - 2000/14/EC
110dB(A)

Standards

Brakes
Brakes meet the standard ISO 10265:2008.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.

Standard/Optional Features

Standard Equipment:

  • Power Train
    • C7.1 Cat Diesel Engine
    • Tier 4 Final/Stage IV/Korea Tier 4 Final Certified Engine with Aftertreatment (DPF and SCR)
    • Diesel Exhaust Fluid
    • Single Poly-Vee Belt with Auto Belt Tensioner
    • Glowplug Starting Aid
    • 3000 Meter Altitude Operation Capability without De-Rating
    • Engine Driven, Viscous Clutch Fan (variable controlled fan speed)
    • Aluminum Bar Plate Cooling Systems (radiator, power train, aftercooler, differential steering)
    • Air Cleaner, Integrated Precleaner with Dust Ejector
    • Electrical Lift/Priming Pump
    • 3 Speed Planetary, Powershift Transmission with Lock-Up Clutch Torque Converter
    • Enhanced Auto Shift (EAS)
    • Infinite Ground Speed Adjustment (GSA)
    • Shift Management: – Automatic Directional and Downshift – Controlled Throttle, Load Compensated
    • Programmable/Selectable Bi-Directional Shifting
    • Differential Steering
    • Engine Idle Shutdown
    • Auto Engine Speed Control
    • Extended Life Coolant
  • Undercarriage
    • Heavy Duty Undercarriage
    • Center Tread Idler
    • Lifetime Lubricated Track Rollers (7 XL and 8 LGP) and Idlers
    • Carrier Rollers
    • Tracks 40 Section – 610 mm (24 in)
    • Extreme Service for XL
    • Tracks 46 Section – 840 mm (33 in)
    • Moderate Service for LGP
    • Hydraulic Track Adjusters
    • Center Track Guiding Guard (LGP only)
  • Hydraulics
    • Three Valve-Hydraulics for VPAT Dozer
    • Load Sensing Hydraulics
  • Electrical
    • Horn
    • Back-up Alarm
    • 12V Converter, 10A
    • Diagnostic Connector
    • 950 CCA Class 31 Batteries
    • Integrated Lights (four front, two rear)
    • 105 AMP HD Brushless Alternator 24 Volt
    • 24V Electric Starter
    • Ground Level Service Center with Remote Electrical Disconnect, Hour Meter and Remote Light Switch
  • Operator Environment
    • ROPS/FOPS Cab
    • Integrated A/C with Automatic Temperature Control
    • Seat, Air Suspension, Cloth for Cab
    • Seat Belt, Retractable – 76 mm (3 in)
    • Adjustable Armrests
    • Foot Rests for Slope Work
    • Color Graphic 7 in (178 mm) Display
    • Power Train Control Module (Throttle Dial, Electronic, Enhanced Auto Shift [EAS] Control and Shift Management Dial)
    • Electronic Engine Air Cleaner Service Indicator
    • Electronic Water-In-Fuel Sensor Service Indicator
    • Electro-Hydraulic Implement and Differential Steering Controls
    • One 12V Power Ports
    • Intermittent Wiper
    • 12V Radio Ready (Plug and Play)
    • Storage Compartment
    • Cup Holder
    • Coat Hook
    • Rearview Mirror
    • Glove Box
  • Technology Products
    • Cat GRADE with Slope Assist
    • Cat Slope Indicate
    • Cat Stable Blade
    • Product Link
  • Other Standard Equipment
    • Shovel Fastener
    • CD ROM Parts Book
    • C-Frame, Cylinders (VPAT) and Lines
    • Extended Service Intervals (500 hours engine, 1,000 hours power train)
    • Guards, Hinged Bottom
    • Ecology Drains (engine oil, engine coolant, power train case, hydraulic)
    • Adjustable Pitch Link (VPAT)
    • Engine Enclosures, Perforated
    • Scheduled Oil Sampling Ports
    • Centralized Remote Mounted Pressure Taps
    • Front Pull Device
    • Hinged Radiator Louvered Grill
    • Lockable Engine Enclosures

Optional Equipment:

  • Power Train
    • Precleaner, Turbine with Screen
  • Undercarriage
    • XL – SystemOne
    • XL – Heavy Duty
    • XL – Heavy Duty with Double Flange
    • XL – SystemOne Fine Grading
    • XL – Heavy Duty Fine Grading
    • LGP – SystemOne
    • LGP – Heavy Duty
    • LGP – Heavy Duty with Double Flange
    • LGP – Super LGP
    • XL – Heavy Duty – Waste
    • LGP – Heavy Duty – Waste
  • Tracks
    • Track Pairs, XL, SystemOne (40 sections): – 610 mm (24 in), Extreme Service – 560 mm (22 in), Extreme Service – 610 mm (24 in), Moderate Service (46 sections)
    • Track Pairs, XL, Heavy Duty (40 sections): – 600 mm (24 in), Extreme Service – 600 mm (24 in), Moderate Service (46 sections) – 600 mm (24 in) Extreme Service, Center Hole
    • Track Pairs, LGP, SystemOne (46 sections): – 840 mm (33 in), Moderate Service – 840 mm (33 in), Extreme Service – 860 mm (34 in), Extreme Service
    • Track Pairs, LGP, Heavy Duty (46 sections): – 600 mm (24 in), Extreme Service – 840 mm (33 in), Extreme Service – 840 mm (33 in), Extreme Service, Center Hole – 860 mm (34 in), Extreme Service
    • Track Pairs, Super LGP, Heavy Duty (52 sections): – 1067 mm (42 in), HD Self Cleaning – 1067 mm (42 in), HD Double Grouser
  • Track Guiding Guards
    • XL, SystemOne: – Guard Guiding, Center – Guard Guiding, Front and Rear – Guard Guiding, Full
    • XL, Heavy Duty: – Guard Guiding, Center – Guard Guiding, Extreme Service, Full
    • LGP, SystemOne: – Guard Guiding, Center – Guard Guiding, Front and Rear – Guard Guiding, Full
    • LGP, Heavy Duty: – Guard Guiding, Center – Guard Guiding, Extreme Service, Full
  • Rear Control Packages
    • Ripper Ready Package
    • Winch Ready Package
    • Dual Control Package (SU, VPAT, Super LGP)
  • Fan And Cooling
    • Radiator, Trash Resistant
    • Direct Drive Fan, Reversible
    • Direct Drive Fan with Hydraulically Reversible Blades
  • Weather Packages And Batteries
    • Battery, Standard, Package
    • Battery, Heavy Duty, Package
    • Cold Weather, 120V, Package
  • Technology Products
    • Cat AccuGrade
    • Cat Grade with 3D
    • ARO Installation
    • No ARO Installation
    • Product Link: – Product Link, Satellite PLE 631 – Product Link, Cellular PLE 641 – No Product Link
  • Fuel Systems
    • Fuel Tank, Standard
    • Fuel Tank, Fast Fill and Refill Ready
  • Guards
    • Guard Packages: – Guard, VPAT, Standard, Package – Guard, VPAT, Heavy Duty, Package – Guard, SU, Heavy Duty, Package – Guard, Rear, Standard – Guard, Rear, Heavy Duty – No Guard
  • Rear Attachments
    • Ripper, Teeth Straight, Package
    • Ripper, Teeth Curved, Package
    • PA55 Winch, Standard Speed Package
    • PA55 Winch, Slow Speed, Package
    • Drawbar
    • Rear Box with Striker Bar
    • No Rear Attachment
  • Rear Hydraulics
    • PTO Filter, No Winch
    • PTO Filter, Winch
  • Bulldozer Packages
    • Bulldozer, VPAT XL, STD Package
    • Bulldozer, VPAT LGP, STD Package
    • Bulldozer, VPAT XL, HD Package
    • Bulldozer, VPAT, LGP, HD Package
    • Bulldozer, VPAT XL, GRADE with 3D
    • Bulldozer, VPAT, LGP, GRADE with 3D
    • Bulldozer, SU XL Package
    • Bulldozer Super LGP
  • Blades
    • Blade, ARO XL, VPAT
    • Blade, ARO LGP, VPAT
    • Blade, ARO XL Foldable, VPAT
    • Blade, ARO LGP Foldable, VPAT
    • Blade, Landfill (XL or LGP)
    • Blade, Super LGP
    • Blade, SU XL
    • No Blade
  • Lights
    • Lights
    • Forestry Lights
    • GRADE with 3D Lights
  • Operator Environment
    • Cab Packages: – Standard with Air Suspension Seat – Cab Comfort Package with Air Suspension/Heated/Ventilated Seat – Cab Comfort Package – Heavy Duty
    • Camera Arrangement
    • Radio, AM/FM/AUX/USB/Bluetooth
  • Hydraulic Oil
    • Hydraulic Oil, Biodegradable
  • Starters, Batteries, And Alternators
    • Electrical Insulated Breather
    • Beacon, Rotating
  • Guards – Cab Protection
    • Cab, Protection Package
    • Screen, Rear
    • Screen, Grill Front
    • Grid, Sandblast
    • Guard, Rear, Drawbar and Winch Ready
  • Fluids
    • Antifreeze, (–37° C/–34.6° F)
  • Other Attachments
    • Winch Options: – Fairlead, 3 Rollers – Fairlead, 4 Rollers
  • Maintenance And Related Attachments
    • Shovel Holder
    • Refilling Fuel Pump
    • Oil Change System, High Speed
  • Special Arrangements
    • Forestry Package (XL or LGP)
    • Waste Handler (XL or LGP)

See how D6N compares against frequently compared products

D6N Dozers

Operating Weight - LGP
40446 lb
XL VPAT Blade
2341 lb
LGP VPAT - Blade
2720 lb
Selected Model

D4 Dozers

Operating Weight - LGP
40446 lb
XL VPAT Blade
2341 lb
LGP VPAT - Blade
2720 lb
View Full Specs

D7 Dozers

Operating Weight - LGP
40446 lb
XL VPAT Blade
2341 lb
LGP VPAT - Blade
2720 lb
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials