Cat C32 ACERT Marine Propulsion Engine (EPA Tier 3)
Commercial Propulsion Engines
Commercial Propulsion Engines (21)
- C280-8 Marine Propulsion Engine (U.S. EPA Tier 4)
- 3508C Propulsion Engine
- 3512C Tier 3 Marine Propulsion Engine
- 3516C Propulsion Engine (Tier 3)
- C280-16 Commercial Marine Propulsion Engine
- C280-12 Propulsion Engine
- C280-12 Marine Propulsion Engine (EPA Tier 4)
- Cat C280-8 Propulsion Engine
- 3516E Marine Propulsion Engine (U.S. EPA Tier 4 Final)
- 3516C Marine Propulsion Engine
- C280-6 Propulsion Engine
- Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)
- 3512C Propulsion Engine (IMO II)
- 3512E Marine Propulsion Engine (U.S. EPA Tier 4 Final)
- Cat C32 Propulsion Engine (IMO II)
- Cat C32 ACERT Marine Propulsion Engine (EPA Tier 3)
- Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)
- Cat C18 ACERT Propulsion Engine (IMO II)
- Cat C18 ACERT Propulsion Engine (Tier 3)
- C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)
- C9.3 Commercial Propulsion Engine
Overview
The C32 ACERT marine propulsion engine is available at ratings that meet both EPA Tier 3 and IMO II emissions regulations. It has a separate circuit aftercooling system (SCAC) for A through C ratings and a seawater aftercooling system (SWAC) for D and E ratings. The C32 ACERT has seven ratings with Wide Operating Speed Range (WOSR) and extended oil change intervals. Other benefits include proven engine operating history and performance iron with thousands of validation testing hours for quality and durability. The C32 ACERT marine engine is supported by the extensive Cat global dealer network and standard warranty.
- Emissions
- Separate Circuit Aftercooling System (SCAC) for A-C ratings
- Seven Ratings with Wide Operating Speed Range (WOSR)
- Extended Oil Change Intervals
- The Cat Global Dealer Network
- Durability
- Reliability
Emissions
IMO II/EPA Tier 3 Compliant Ratings
Separate Circuit Aftercooling System (SCAC) for A-C ratings
No seawater circulating through the aftercooling system to prevent corrosion.
Seven Ratings with Wide Operating Speed Range (WOSR)
Full power & torque are available for a broader operating speed range. For example: With an A rating at 1800 rpm - you have full power from 1500 to 1800 rpm.
Extended Oil Change Intervals
A Ratings: 1000 hours, B Ratings: 750 hours, C Ratings: 500 hours
The Cat Global Dealer Network
Extensive service network of CAT dealers as well as unparalleled service from certified authorized marine dealers.
Durability
Proven engine operating history: performance iron with thousands of hours of validation testing for quality and durability
Reliability
Backed by Caterpillar's standard warranty
Emissions
IMO II/EPA Tier 3 Compliant Ratings
Separate Circuit Aftercooling System (SCAC) for A-C ratings
No seawater circulating through the aftercooling system to prevent corrosion.
Seven Ratings with Wide Operating Speed Range (WOSR)
Full power & torque are available for a broader operating speed range. For example: With an A rating at 1800 rpm - you have full power from 1500 to 1800 rpm.
Extended Oil Change Intervals
A Ratings: 1000 hours, B Ratings: 750 hours, C Ratings: 500 hours
The Cat Global Dealer Network
Extensive service network of CAT dealers as well as unparalleled service from certified authorized marine dealers.
Durability
Proven engine operating history: performance iron with thousands of hours of validation testing for quality and durability
Reliability
Backed by Caterpillar's standard warranty
Power Rating
- Power Range
- 750-1800 bhp (559-1342 bkW)
- Power Range
- 750-1800 bhp (559-1342 bkW)
Engine Specifications
- Speed Range
- 1600-2300 rpm
- Emissions
- EPA Tier 3, IMO II, EU IW
- Aspiration
- TTA
- Bore
- 5.71in
- Stroke
- 6.38in
- Displacement
- 1959.0in3
- Rotation from Flywheel End
- Counterclockwise
- Configuration
- Vee 12, 4-Stroke-Cycle Diesel
- Speed Range
- 1600-2300 rpm
- Emissions
- EPA Tier 3, IMO II, EU IW
- Aspiration
- TTA
- Bore
- 5.71in
- Stroke
- 6.38in
- Displacement
- 1959in³
Dimensions & Weights
- Minimum Dry Weight
- 6950.0lb
- Minimum Length
- 77.8in
- Minimum Height
- 60.9in
- Minimum Width
- 60.17in
- Maximum Length
- 83.5in
- Maximum Height
- 62.5in
- Maximum Width
- 60.17in
- Minimum Dry Weight
- 6950lb
- Minimum Height
- 60.9in
- Minimum Length
- 77.8in
- Minimum Width
- 60.17in
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Separate Circuit After-Cooled (SCAC)
- Seawater After-Cooling (SWAC) System
- Air cleaner
- Turbochargers, jacket water cooled
- Turbochargers inlet, 152 mm (6 in) OD straight connection
-
- Control System
-
- Programmable Low Idle (550 - 750 rpm)
- WOSR (Wide Operating Speed Range) available for - A, B, & C Ratings
- Programmable High Idle Limit for WOSR Ratings
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (speed, temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- Torque Limiting functionality for WOSR ratings only
- 70-pin customer connector
- Throttle Input signal options
-
- Cooling System
-
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) ID Standard
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- Seawater After-Cooling (SWAC) System
-
- Exhaust System
-
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
- Water-cooled exhaust manifold & turbocharger
-
- Flywheels & Flywheel Housings
-
- SAE standard rotation (CCW facing exciter end)
- Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth
-
- Fuel System
-
- Duplex Fuel Filters, Spin-on, RH & LH service
- Fuel connections size:Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate Type Fuel Cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- Hybrid fuel line design
-
- Lube System
-
- Simplex Oil Filters, RH or LH service
- Deep sump oil pan
- RH or LH service oil filler locations
- RH or LH service dipstick
- Oil pump, gear driven
-
- Mounting System
-
- Front support - adjustable
-
- Power Take-offs
-
- Front Poly-V groove pulley (Quantity 1) for auxiliary drives
-
- General
-
- Common electrical bonding point
- Engine does not ship with zinc components
Optional Equipment:
-
- Air Inlet Systems
-
- Air Inlet Cleaner
- Air Inlet Adapter
-
- Charging Systems
-
- Battery Charger
- Charging Alternators
- Ammeter
-
- Cooling System
-
- Marine Gear/Transmission Oil Coolers
- Connections
-
- Exhaust System
-
- Dual Elbow
- Flexible Fitting
- Dual Muffler
- Muffler Spark Arresting
- Flange
-
- Fuel System
-
- Water Separator
-
- Instrumentation
-
- OEM Wiring Harness
- Engine to Engine Harness
- Instrument Panels
- Exhaust Temperature Sensors
- Wiring Harness
- Gauges
- Transmission Sensors
-
- Lube System
-
- Transmission Oil Cooler
- Manual Sump Pump
- Duplex Oil Filters
-
- Protection System
-
- Fuel and Oil Shielding
-
- Starting System
-
- Air Starting Motor
- Air Start Accessories
- Electric Starting Motors - Single 24 Volt
- Starting Aids
- Battery Sets - 24 Volt - Dry
- Dual Starting Motors (Electric and Air)
-
- Packing
-
- Engine Protective Cover
- Export Packing
- Storage Preservation
-
- Mounting System
-
- Front Support
- Adapter Kits
- Isolator Mounts
-
- Power Take-offs
-
- Front Enclosed Clutches
- Rear Hydraulic Pump Drive
-
- General
-
- Fumes Disposal
-
- Control System
-
- Instrument Panels
- CATERPILLAR ALARM AND PROTECTION
- Fuel and Oil Shielding