3512C High Displacement Marine Generator Set
Marine Generator Sets
Marine Generator Sets (15)
- Cat C280-12 Marine Generator Set
- Cat C280-16 Marine Generator Set
- 3512C High Displacement Marine Generator Set
- Cat C280-6 Marine Generator Set
- Cat C280-8 Marine Generator Set
- Cat C32 Generator Set (US EPA Tier 3 / IMO II)
- Cat C32 Generator Set (IMO III)
- Cat C32 ACERT Generator Set (IMO II)
- Cat C32 ACERT Generator Set (EPA Tier 3)
- C18 Marine Generator Set
- C4.4 (Electronic Control System)
- Cat® C4.4 Marine Generator Set
- C9.3 Marine Generator Set
- Cat C2.2 Marine Generator Set
- C1.5 Marine Generator Set Engine
Overview
- Emissions flexibility and capability
- High power density
- Improved reliability and durability
- Medium speed BSFC and reliability in a high-speed product
Emissions flexibility and capability
High power density
Improved reliability and durability
Medium speed BSFC and reliability in a high-speed product
Emissions flexibility and capability
High power density
Improved reliability and durability
Medium speed BSFC and reliability in a high-speed product
Generator Set Specifications
- Minimum Rating
- 1550 eKW (1937 kVA)
- Maximum Rating
- 1700 eKW (2125 kVA)
- Frequency
- 60 hz
- Speed
- 1800
- Minimum Rating
- 1550 eKW (1937 kVA)
- Maximum Rating
- 1700 eKW (2125 kVA)
- Frequency
- 60 hz
- Speed
- 1800
Engine Specifications
- Configuration
- Vee 12 4-Stroke-Cycle Diesel
- Aspiration
- TTA
- Bore
- 6.7in
- Stroke
- 8.46in
- Displacement
- 3574.0in3
- Configuration
- Vee 12 4-Stroke-Cycle Diesel
- Aspiration
- TTA
- Bore
- 6.7in
- Stroke
- 8.46in
- Displacement
- 3574in³
Generator Set Dimensions
- Length
- 200.2in
- Width
- 84.3in
- Height
- 83.9in
- Weight (Estimated)
- 28136.0lb
- Length
- 200.2in
- Width
- 84.3in
- Height
- 83.9in
- Weight - Estimated
- 28136lb
Generator Set Configurations
- Emissions
- IMO II
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
-
- Control System
-
- Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
-
- Cooling System
-
- Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
-
- Exhaust System
-
- Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
-
- Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
-
- Fuel System
-
- Fuel filter, RH, with service indicators
- Fuel transfer pump
- Electronically Controlled Unit Injectors
-
- Instrumentation
-
- Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
-
- Lube System
-
- Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
-
- Mounting System
-
- Industrial type engine mounting rails)
-
- Power Take-offs
-
- Accessory drive Lower RH, Lower LH Front housing, Two-sided
-
- Protection System
-
- A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
-
- General
-
- Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
Optional Equipment:
-
- Air Inlet System
-
- Air Cleaner Removal
- Remote Air Inlet Adapters
-
- Charging System
-
- Battery Chargers
- Charging Alternators
-
- Control System
-
- Load Sharing module
- Local speed throttle control
-
- Cooling System
-
- Water level switch gauge
- Coolant level sensors
- Connections
- Keel Cooling Conversions
- Radiator cooling conversion
- Heat exchangers
- Auxiliary water pumps
- Sea water pump removal
- Air separator
-
- Exhaust System
-
- Exhaust outlet
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
-
- Fuel System
-
- Fuel Cooler
- Fuel priming pumps
- Flexible fuel lines
- Rigid Fuel Lines
- Primary fuel filter
- Fuel level switch
-
- Generators And Generator Attachments
-
- 1500/1800 RPM, 1000/1200 RPM
- Low Voltage Connection
- Generator Conversion
- Low Voltage Extension Box
- RFI Filter
- Bearing Temperature Detectors
- Manual Voltage Control
- Air Filter
-
- Instrumentation
-
- PL1000T Communication Module
- PL1000E Communication Module
- Customer Interface Box
- Thermocouples
- Remote panel display
- Remote cylinder temperature display
-
- Lube System
-
- Oil Pan
- Oil pan accessories
- Sump pumps
- Prelubrication Options
- Lubricating oil
- Centrifugal Oil Filter
-
- Mounting System
-
- Vibration isolators
- Rails
-
- Power Take-offs
-
- Flywheel guard
- Flexible coupling
- Coupling hub
- Front housing accessories
- Upper left hand front location
- Upper left hand rear location
- Upper right hand front location:
- Upper right hand rear location
- Lower left hand front location
- Front housing accessory drives
- Front power take-offs
- Crankshaft pulleys
- Damper guard removals
-
- Protection System
-
- Air inlet shutoffs
- Switches and contactors
- Explosion relief valve
- Sensors
-
- Starting System
-
- Starting motors or barring divice
- Air starting motors options
- Battery sets - 24 volt - Dry
- Battery rack
- Jacket Water Heater
-
- General
-
- Tool set
- Caterpillar datalink wire
-
- Svce Tools/ship Prot/factory Support
-
- Commissioning