Cat 14 Motor Grader

14 Motor Grader

Overview

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 (14M3) features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

TECHNOLOGY THAT GETS WORK DONE
  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
MOVE MORE, BURN LESS
  • Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
MORE CONTROL AND EFFICIENCY
  • Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
DESIGNED FOR OPERATORS
  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
BUILT-IN SAFETY FEATURES
  • Optional rear vision camera enhances sight to rear of machine.
  • Electrical disconnect and engine shutoff switches are ground level.
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
SAVE MAINTENANCE TIME
  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
TECHNOLOGY THAT GETS WORK DONE
  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
MOVE MORE, BURN LESS
  • Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  • Standard VHP Plus provides ideal amount of power in all gears.
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
MORE CONTROL AND EFFICIENCY
  • Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
DESIGNED FOR OPERATORS
  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
BUILT-IN SAFETY FEATURES
  • Optional rear vision camera enhances sight to rear of machine.
  • Electrical disconnect and engine shutoff switches are ground level.
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  • Optional seat belt indicator promotes safe operating habits.
SAVE MAINTENANCE TIME
  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Service Refill Capacities

Fuel Tank
109.9gal (US)
Cooling System
15.9gal (US)
Circle Drive
1.8gal (US)
Hydraulic System
33gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8gal (US)
Transmission and Differential
23.5gal (US)

Engine

Standard - Fan Speed - Maximum
1,600 rpm
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Number of Cylinders
6
Displacement
763in³
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Standard - Fan Speed - Minimum
550 rpm
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Maximum Altitude - Full Power (Tier 2)
12049ft
Maximum Altitude - Full Power (Tier 3)
14349ft
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Torque - VHP Plus
1137lb/ft
Maximum Altitude - Full Power
13900ft
Torque Rise
41%
Note (2)
Optimized VHP Plus is standard for the 14M3.
Standard Capability
122°F
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Speed at Rated Power
1,850 rpm
Bore
5.1in
Stroke
6.2in
Engine Model
Cat C13
Base Power (1st Gear) - Net
238HP

Weights

Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Gross Vehicle Weight - Base* - Rear Axle
36994lb
Gross Vehicle Weight - Typically Equipped - Front Axle
15245lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005lb
Gross Vehicle Weight - Typically Equipped - Total
57250lb
Gross Vehicle Weight - Base* - Front Axle
13994lb
Gross Vehicle Weight - Base* - Total
50980lb
Operating Weight - Typically Equipped
57250lb

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Blade Range

Blade Tip Range - Forward
40°
Maximum Shoulder Reach Outside of Tires - Left
73.6in
Moldboard Sideshift - Left
29.1in
Moldboard Sideshift - Right
31.1in
Maximum Shoulder Reach Outside of Tires - Right
78.9in
Blade Tip Range - Backward
Circle Centershift - Right
20.5in
Maximum Lift Above Ground
16.5in
Circle Centershift - Left
25.6in
Maximum Depth of Cut
23.3in

Moldboard

Blade Height - Without Cutting Edge
23in
Blade Width - Without End Bits
164in
Blade Height - With Cutting Edge
24.9in
Blade Width - With End Bits
169in
Throat Clearance
4.6in
Arc Radius
16.3in
Blade Width
14ft

Frame

Front Axle - Total Oscillation per Side
32°
Front Axle - Wheel Lean - Left/Right
17.1°
Circle - Outer Diameter
71.7in

Standard/Optional Features

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Joystick, power adjustable armrests
    • Air conditioner with heater
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Message display
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab, LED
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, mechanical suspension, cloth
    • Storage compartments
    • Throttle control, electronic
  • Power Train
    • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
    • Articulation, automatic Return-to-Center
    • Air-to-Air After Cooler (ATAAC)
    • Auto Diff Lock
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent power to ground
    • Monitoring system
    • Clutch, circle drive slip
    • Differential, lock/unlock*
    • Drain, engine oil, ecology
    • Demand fan, hydraulic
    • Engine ECO Mode
    • Ether starting aid
    • Fuel tank, ground level
    • Fuel-water separator
    • Hydraulic demand fan
    • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
    • Optimized VHP
    • Parking brake - multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
    • Transmission, 8F/6R, power shift, direct drive
  • Electrical
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, HD, 1,125 CCA
    • Breaker panel
    • Electrical system, 24V*
    • Belt, serpentine, automatic tensioner
    • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
    • Product Link
    • Starter, electric
    • Service lights, enclosure, rear, LED
  • Safety
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator Not Present Monitoring system
    • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air horn
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat, heated
    • Seat, heated/ventilated
    • Rearview camera
    • Seat belt indicator
  • Power Train
    • Transmission, autoshift
    • Engine, compression brake
  • Technology
    • Cat GRADE with Cross Slope
    • Stable Blade
    • Advanced Control Joysticks
    • Auto Articulation
  • Guards
    • Debris guard
    • Front axle cylinder guards
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
    • Accumulators, blade lift
    • Fast fill fuel, 378.5 L/min (100 gal/min)
    • Metallic DCM wear strips
  • Electrical
    • Light, LED, warning strobe
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Working lights halogen
    • Working lights LED
  • Safety
    • Additional rearview camera and monitor
    • Machine security system key
  • Other Attachments
    • Moldboard, 4.9 m (16 ft)
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
    • Product Link satellite, cellular
    • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
    • Snow wing, mounting frame ready
    • Fast fill
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • Fluids
    • Coolant, -51 degrees C (-60 degrees F)

See how 14 compares against frequently compared products

14 Motor Graders

Selected Model

140 / 140 AWD Motor Graders

View Full Specs

150 / 150 AWD Motor Graders

View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials