Cat 160 Motor Grader

160 Motor Grader

Motor Graders

Overview

Reduce your carbon footprint with the latest in emissions reduction technology with the durable Cat® 160 Motor Grader. The 160 motor grader unites comfortability and productivity to get optimal performance on the jobsite. Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.

DESIGNED FOR OPERATORS
  • Good visibility is key to safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. Optional rear vision camera further enhances lines of sight all around the machine.
  • Experience the most spacious, comfortable cab in the industry.
POWERFUL EFFICIENCY
  • Cat C9.3 engine delivers the performance needed to maintain consistent grading speeds for maximum productivity.
  • Latest engine technology optimize productivity, fuel efficiency, reliability, life and minimize emissions.
  • Hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
HEAVY DUTY CONSTRUCTION
  • Caterpillar designs motor grader frame and drawbar components to give you performance and durability.
  • The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.
  • Articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation during service or transport.
TECHNOLOGY THAT GETS WORK DONE
        
  • Cat technologies makes smart use of technology and services to improve job site efficiency. Using the data from technology equipped machines, get more information and insight into equipment and operations
  •     
  • Cat technologies offer improvements in these key areas:
SAFETY FIRST
  • Operator Presence Monitor keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
  • Speed Sensitive Steering lessens steering sensitivity as ground speed increases for greater operator confidence and control.
TOP-TIER SERVICE AND SUPPORT
  • Cat motor graders are designed to help you increase uptime and reduce costs.
  • Grouped service points and extended service intervals save maintenance time.
  • New, optional LED lights in the left hand compartments make it more convenient to service the machine in low light.
  • Cat dealers are second to none. From machine selection and purchase to maintenance support, operator training and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running at peak performance.
SUSTAINABILITY
  • The Cat® C9.3 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
DESIGNED FOR OPERATORS
  • Good visibility is key to safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. Optional rear vision camera further enhances lines of sight all around the machine.
  • Experience the most spacious, comfortable cab in the industry.
  • Easy-to-learn joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity.
  • Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
  • Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock.
  • Joystick lean angle mirrors the steer tires' turning angle.
  • A brake tensioning system holds the joystick in position until the operator moves it.
  • Steering control automatically reduces sensitivity at higher ground speeds for predictable control.
  • Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).
  • Control switches are in easy reach.
  • Updated seat offers softer cushions, three-position tilt and optional heated and heated/cooled cushions.
  • Control pods are electronically positioned allowing each operator to set the ideal operating position.
  • Multiple isolation mounts reduce sound and vibration for a more relaxed work environment.
  • High capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.
  • An optional deluxe radio with CD features MP3 and Bluetooth® technology.
  • New Message Display shows machine performance and diagnostic information. Located in center console, it also displays Grade Control Cross Slope readings.
  • Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.
  • Articulation Return-to-Center automatically returns the machine to a straight frame position from any angle with the touch of a button.
  • Select Fine, Normal or Coarse blade lift modulation to best fit application or operator preference.
POWERFUL EFFICIENCY
  • Cat C9.3 engine delivers the performance needed to maintain consistent grading speeds for maximum productivity.
  • Latest engine technology optimize productivity, fuel efficiency, reliability, life and minimize emissions.
  • Hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
  • Engine Idle Shutdown Timer is software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
  • Optional Reversing Fan, clears debris on-the-go.
  • The Motor Gradersgive you efficiency and longevity in your most demanding applications.
  • Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
  • Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
  • Programmable AutoShift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.
  • Eco Mode can be engaged for up to 10% fuel savings depending upon application.
  • Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
  • Wide operating gear range for maximum productivity.
  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
  • Sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life.
  • Bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
  • Oil-bath, multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.
  • Emissions technology is transparent with no action required from the operator or need to stop. Regeneration runs automatically at cold start-up and, if needed, in the background while you work.
  • Reaching Tier 4 Final standards only required one additional system to the proven Cat emission strategy - Selective Catalytic Reduction (SCR).
  • SCR utilizes Diesel Exhaust Fluid (DEF), conveniently filled from ground level when re-fueling.
  • A gauge on the dash shows your fluid level.
  • At shutdown, a pump automatically purges the DEF lines.
  • If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines.
HEAVY DUTY CONSTRUCTION
  • Caterpillar designs motor grader frame and drawbar components to give you performance and durability.
  • The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.
  • Articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation during service or transport.
  • The drawbar, circle and moldboard make it easy for you to keep the components tight.
  • Shims and patented top-adjust wear strips are easy to add or replace, reducing downtime.
  • Durable nylon composite wear inserts maximize circle torque and component life.
  • Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
  • An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade.
  • Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life.
  • Link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.
  • Proven load-sensing hydraulic system and advanced electro-hydraulics give you superior implement control and responsive performance that makes operator's jobs easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.
  • Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
  • Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.
  • Blade can float freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
  • Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, reducing heat build-up and extending component life.
  • Cat XT™ hose allows high pressures for maximum power and reduced downtime.
TECHNOLOGY THAT GETS WORK DONE
        
  • Cat technologies makes smart use of technology and services to improve job site efficiency. Using the data from technology equipped machines, get more information and insight into equipment and operations
  •     
  • Cat technologies offer improvements in these key areas:
  •     
  • Equipment Management - increase uptime and reduce operating costs.
  •     
  • Productivity - monitor production and manage job site efficiency.
  •     
  • Safety - enhance job site awareness to keep your people and equipment safe.
  •     
  • Featured Cat technologies include -
        
  1. Link technologies that provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat technologies using off-board apps, such as Cat VisionLink® software.
  2.     
  3. Cat Product Link/VisionLink is deeply integrated, helping take guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface helps effectively manage fleet and lower operating costs.
  4.     
  5. Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
  6.     
  7. Cat Grade with Cross Slope is an optional, factory installed system that helps improve grading efficiency and more easily maintain accurate cross slopes. The system automatically controls one side of the blade, reducing manual operator inputs by as much as 50 percent. Experienced operators can maintain peak efficiency levels throughout more of the work day, while less experienced operators can be more productive faster. The system is job-ready from day one, and scalable for the future with upgrade kits that provide additional 2D and/or 3D control.
        
  • Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
  •     
  • Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
  •     
  • Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
  •     
  • Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.
  •     
  • Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.
SAFETY FIRST
  • Operator Presence Monitor keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
  • Speed Sensitive Steering lessens steering sensitivity as ground speed increases for greater operator confidence and control.
  • Secondary Steering System's electric hydraulic pump automatically engages in case of a drop in steering pressure to ensure operator can steer the machine to a stop.
  • Hydraulic lockout disables all implement functions while still providing machine steering control. Especially useful while roading.
  • Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
  • Perforated steel tandem walkways and convenient grab rails provide a sturdy platform when moving on, off and around the machine.
  • Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.
  • Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature reduces wear and impact loading for enhanced operator safety.
  • Safety Features -
  1. Optional rearview camera with in-cab monitor
  2. New, optional seat belt indicator light reminds operator to fasten safety belt
  3. Grouped, ground level service points
  4. Laminated front window glass
  5. Optional LED Lighting
  6. Ground-level electrical disconnect switch
  7. Ground-level engine shutoff switch
  8. Anti-glare paint eases night operation
  9. Optional front and rear fenders
TOP-TIER SERVICE AND SUPPORT
  • Cat motor graders are designed to help you increase uptime and reduce costs.
  • Grouped service points and extended service intervals save maintenance time.
  • New, optional LED lights in the left hand compartments make it more convenient to service the machine in low light.
  • Cat dealers are second to none. From machine selection and purchase to maintenance support, operator training and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running at peak performance.
SUSTAINABILITY
  • The Cat® C9.3 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cat® Grade helps reduce fuel burn and greenhouse gas emissions by enabling you to achieve grade faster and more accurately by automating blade actions.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
  • Cat® Reman parts are a sustainable choice. New Cat parts are designed with the potential to have more than one life, so Cat Reman parts are truly remanufactured — not just repaired, rebuilt or reconditioned. Because the process ensures the latest design changes are incorporated into Cat Reman parts, you get like new quality and outstanding performance at lower cost.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

Standards

Sound
ISO 6394; ISO 6395
Steering
ISO 5010
ROPS/FOPS
ISO 3471; ISO 3449
Brakes
ISO 3450

Dimensions

Ground Clearance - Rear Axle
13.3in
Height - Top of Cylinders
120in
Height - Exhaust Stack
128in
Height - Front Axle Center
23.5in
Width - Tire Center Lines
84.3in
Width - Outside Rear Tires
98.9in
Length - Between Tandem Axles
60in
Length - Front Axle to Moldboard
100in
Length - Front Tire to Rear of Machine
351in
Length - Front Axle to Mid Tandem
241in
Width - Outside Front Tires
98.9in
Length - Counterweight to Ripper
399in
Height - Top of Cab
130in

Weights

Operating Weight - Typically Equipped - Rear Axle
32310lb
Operating Weight - Typically Equipped - Total
45547lb
Gross Vehicle Weight - Maximum - Front Axle
17075lb
Gross Vehicle Weight - Base - Total
38719lb
Operating Weight - Typically Equipped - Front Axle
13237lb
Gross Vehicle Weight - Maximum - Total
55144lb
Gross Vehicle Weight - Base - Rear Axle
28812lb
Gross Vehicle Weight - Base - Front Axle
9907lb
Gross Vehicle Weight - Maximum - Rear Axle
38069lb
Operating Weight - Typically Equipped
45547lb

Scarifier

Rear - Scarifier Shank Holder Spacing
10.5in
Rear - Scarifier Shank Holders
9
Rear - Working Width
84in
Mid, V-Type - Scarifier Shank Holders
11
Front, V-Type, 5 or 11 Tooth - Working Width
40.6in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5/11
Mid, V-Type - Scarifying Depth, Maximum
11.5in
Mid, V-Type - Scarifier Shank Holder Spacing
4.6in
Front, V-Type - Working Width
47.4in
Rear - Scarifying Depth, Maximum
16.8in
Mid, V-Type - Working Width
46.6in
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18.4in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
4.6in

Ripper

Machine Length Increase, Beam Raised
40.6in
Pry-Out Force
28493lb
Penetration Force
20812lb
Ripper Shank Holders
5
Ripper Shank Holder Spacing
21in
Ripping Depth - Maximum
16.8in

Blade Range

Maximum Shoulder Reach Outside of Tires - Right
89.7in
Maximum Shoulder Reach Outside of Tires - Left
82.3in
Maximum Depth of Cut
29.5in
Maximum Lift Above Ground
17.8in
Blade Tip Range - Backward
Blade Tip Range - Forward
40°
Moldboard Sideshift - Left
20.1in
Maximum Blade Position Angle
90°
Moldboard Sideshift - Right
26in
Circle Centershift - Left
27.4in
Circle Centershift - Right
28.7in

Moldboard

Moldboard - Blade Width
14ft
Blade Down Pressure - Maximum GVW
29308lb
Blade Down Pressure - Base GVW
17004lb
Blade Pull - Maximum GVW
34262lb
Blade Pull - Base GVW
25931lb
End Bit - Width
6in
End Bit - Thickness
0.6in
Cutting Edge Thickness
0.6in
Cutting Edge Width
6in
Throat Clearance
6.5in
Arc Radius
16.3in
Moldboard - Thickness
0.87in
Moldboard - Height
24in
Blade Width
14ft

Operating Specifications

Articulation Angle - Left/Right
20°
Steering Range - Left/Right
50°
Turning Radius - Outside Front Tires
25.59ft
Top Speed - Reverse
23.3mile/h
Top Speed - Forward
29.5mile/h
Reverse - 6th
23.3mile/h
Reverse - 5th
16mile/h
Reverse - 4th
8.5mile/h
Reverse - 3rd
5.5mile/h
Reverse - 2nd
3.8mile/h
Reverse - 1st
2mile/h
Forward - 8th
29.5mile/h
Forward - 7th
20.3mile/h
Forward - 6th
14.7mile/h
Forward - 5th
10.8mile/h
Forward - 4th
7mile/h
Forward - 2nd
3.5mile/h
Forward - 3rd
5.1mile/h
Forward - 1st
2.6mile/h

Hydraulic System

Standby Pressure
885psi
Reservoir Tank Capacity
16.9gal (US)
Maximum System Pressure
3503psi
Pump Output
55.5gal/min
Pump Type
Variable Piston
Circuit Type
Parallel

Power Train

Brakes - Secondary
Dual Circuit Control
Brakes - Parking
Multiple Oil Disc
Brakes - Service
Multiple Oil Disc
Brakes - Service - Surface Area
3565in²
Transmission
APECS, Direct Drive, Powershift
Forward/Reverse Gears
8 Forward/6 Reverse

Engine

High - Ambient Capability
122°F
High Ambient - Fan Speed - Minimum
500 rpm
High Ambient - Fan Speed - Maximum
1,550 rpm
Derating Altitude
10000ft
Number of Cylinders
6
Displacement
567.5in³
VHP Plus - Gear - Net Power - Reverse 3rd-6th
241hp
Emissions
U.S. EPA Tier 4 Final/EU Stage V
VHP Plus Range - Net - Metric
165-203 kW (224-276 hp)
VHP Plus - Gear - Net Power - Reverse 2nd
231hp
VHP Plus - Gear - Net Power - Forward 5th
257hp
High Ambient - Fan Speed - Standard
1,400 rpm
Base Power (1st Gear) - Net - Metric
224hp
VHP Plus - Gear - Net Power - Reverse 1st
221hp
VHP Plus - Gear - Net Power - Forward 7th
267hp
VHP Plus Range - Net
165-203 kW (221-272 hp)
Maximum Torque - VHP Plus
1000lb/ft
VHP Plus - Gear - Net Power - Forward 6th
262hp
VHP Plus - Gear - Net Power - Forward 2nd
231hp
VHP Plus - Gear - Net Power - Forward 4th
252hp
VHP Plus - Gear - Net Power - Forward 3rd
241hp
VHP Plus - Gear - Net Power - Forward 8th
272hp
Torque Rise
39%
Standard Capability
109°F
VHP Plus - Gear - Net Power - Forward 1st
221hp
Stroke
5.9in
Speed at Rated Power
2,000 rpm
Bore
4.5in
Engine Model
Cat® C9.3
Base Power (1st Gear) - Net
221hp

Tandems

Tandem Oscillation - Front Down
25°
Tandem Oscillation - Front Up
15°
Wheel Axle Spacing
60in
Drive Chain Pitch
2in
Sidewall Thickness - Outer
0.71in
Sidewall Thickness - Inner
0.69in
Width
8in
Height
22.5in

Frame

Front Axle - Total Oscillation per Side
32°
Front Axle - Wheel Lean - Left/Right
18°
Front Axle - Height to Center
23.5in
Front-Top/Bottom Plate - Thickness
0.87in
Front-Top/Bottom Plate - Width
12in
Drawbar - Thickness
0.5in
Front Frame Structure - Height
12.6in
Circle - Height
6.3in
Front Frame Structure - Width
12in
Drawbar - Height
6in
Circle - Blade Beam Thickness
1.6in
Circle - Diameter
61.1in
Drawbar - Width
3in

Service Refill

Circle Drive Housing
1.8gal (US)
Front Wheel Spindle Bearing Housing
0.13gal (US)
Tandem Housing - Each
22.9gal (US)
Engine Oil
7.9gal (US)
Diesel Exhaust Fluid
5.8gal (US)
Transmission - Differential - Final Drives
18.5gal (US)
Hydraulic System - Tank
16.9gal (US)
Hydraulic System - Total
26.4gal (US)
Cooling System
15gal (US)
Fuel Capacity
104gal (US)

Standard/Optional Features

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    • Air-to-air after cooler (ATAAC)
    • Belt, serpentine, automatic tensioner
    • Brakes, oil disc, four-wheel, hydraulic
    • Demand fan, hydraulic, swing-out
    • Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
    • Differential Lock/Unlock, Automatic
    • Drain, engine oil, ecology
    • Economy mode
    • Electronic over speed protection
    • Engine, C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
    • Fuel tank, 394 L (104 gal), ground level access and sediment drain
    • Parking brake - multi-disc, sealed, oil-cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
  • Electrical
    • Alarm, back up
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1125 CCA
    • Breaker panel, ground accessible
    • Cab harness and electrical hydraulic valves
    • Electrical system, 24V
    • Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
    • Lights, roof-mounted roading, reversing, LED stop and tail
    • Product Link
    • Starter, electric
  • Operator Environment
    • Accelerator
    • Air conditioning with heater
    • Arm and wrist rest, electronically adjustable
    • Articulation, automatic Return-to-Center
    • Cat Messenger operator information system
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauge, machine level
    • Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
    • Hour meter, digital
    • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
    • Joystick, adjustable armrests
    • Joystick gear selection
    • Joystick hydraulic power steering
    • Ladders, cab, left and right side
    • Lights, night time cab
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio Ready, Entertainment
    • ROPS cab, sound suppressed 70 dB(A)
    • Seat, cloth-covered, comfort suspension
    • Seat belt, retractable 76 mm (3 in)
    • Storage area for cooler/lunchbox
    • Throttle control, electronic
    • Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
    • Windows: tempered: - left and right side wipers - rear and intermittent wiper
  • Fluids
    • Antifreeze
    • Extended Life Coolant to -35° C (-30° F)
  • Tires, Rims And Wheels
    • Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight
  • Other Standard Equipment
    • Accumulators, brake, dual certified
    • Anti-glare paint
    • Bumper, rear, integrated with hitch
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges: - 152 — 16 mm (6 — 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Doors (3), engine compartment, locking
    • Drawbar - 6 shoes, replaceable wear strips
    • Electrical hydraulic valves, hydraulic lines for base 8 functions
    • Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Fluid check, ground level
    • Frame, articulated, with safety lock
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Hydraulic lines for base functions
    • Lockout, hydraulic implement (for roading and servicing)
    • Moldboard
    • Mounting, cab roof accessories
    • Pump, hydraulic, high capacity
    • Radiator, cleanout access (both sides with swing doors)
    • Secondary steering
    • Serviceability, LH side
    • S·O·S ports: engine, hydraulic, transmission, coolant, fuel
    • Tandem walkway/guards
    • Tool box

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alternator, 280 ampere
    • Batteries: extreme duty, 1,400 CCA
    • Lights: Headlights, high
    • Lights: Headlights, low
    • Lights: Working lights, basic
    • Lights: Working lights, plus, LED
    • Lights: Warning: beacon or strobe
    • Lights: Mounting for warning light
  • Guards
    • Articulation guard
    • Fenders, front
    • Fenders, rear
    • Front axle guard
    • Sound suppression (bottom)
    • Sound suppression (enclosure)
    • Transmission
  • Operator Environment
    • Mirrors, outside: heated 24V
    • Mirrors, outside: mounted
    • Comfort Plus Arrangement
    • Comfort Premium Arrangement
  • Power Train
    • All Wheel Drive
    • Precleaner, snow
    • Starter, extreme duty, 1,000 Amps
    • Transmission, autoshift
  • Other Attachments
    • Attachment Ready Option ARO
    • Integrated cross slope
    • Accumulators, blade lift
    • Camera, rearview
    • Cat Product Link 321SR
    • Cat Product Link 522
    • Drain, ecology, engine Wiggins
    • Heater, engine coolant: 120V
    • Heater, engine coolant: 240V
    • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
    • Snow wing mounting, frame ready
    • Starting aid, ether
    • Reversing fan, automatic or manual
    • Cat Grade with 3D
  • Work Tools/g.e.t.
    • Blade extension, left hand, 610 mm (2 ft)
    • Blade extension, right hand, 610 mm (2 ft)
    • Counterweight
    • Cutting edges, curved
    • Endbits, overlay
    • Front lift group, mounting
    • Front lift group, mechanical
    • Grader bit, narrow and super penetration
    • Mid-Mount Scarifier, Package
    • Moldboard: 4267 mm — 610 mm — 22 mm (14 ft — 24 in — 7/8 in)
    • Moldboard: 4267 mm — 686 mm — 25 mm (14 ft — 27 in — 1 in)
    • Moldboard: 4877 mm — 686 mm — 25 mm (16 ft — 27 in — 1 in)
    • Push plate
    • Ripper, rear
    • Ripper tooth
    • Scarifier, front
    • Snow Arrangement
    • Snow Wing Ready Package
    • Tow hitch
  • Machine Arrangements
    • Canadian Arrangement
    • European Arrangement
    • TUV Roading Arrangement
  • Optional Tire Arrangements
    • Rim Size - 9 × 24; Wheel Group - Single-Piece; Tires - 14.0R24
    • Rim Size - 13 × 25; Wheel Group - Single-Piece; Tires - 17.5R25
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0R24
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0-24
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5-25
    • Note: Consult your dealer for individual tire width, size and brand.

Take The Virtual Product Tour To Explore The Features And Benefits of the 160 Motor Grader

See how 160 / 160 AWD - Tier 4 / Stage 5 compares against frequently compared products

160 / 160 AWD - Tier 4 / Stage 5 Motor Graders

Operating Weight - Typically Equipped
45547 lb
Base Power (1st Gear) - Net
221 hp
Maximum Depth of Cut
29.5 in
Selected Model

120 / 120 AWD Motor Graders

Operating Weight - Typically Equipped
35067 lb
Net Power Range (Tier 4)
139 HP
Basic Blade Width
12 ft
Maximum Depth of Cut
30.5 in
View Full Specs

120 GC Motor Graders

Operating Weight - Typically Equipped
31958 lb
Maximum Depth of Cut
30.5 in
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »