Cat® 3516E Diesel Engine

The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.

The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.

The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.

Request a Quote
Aftertreatment
SCR
Minimum Power
2100 HP
Maximum Power
2100 HP
Maximum Torque
8275 lb-ft @ 1200 rpm

Videos not available for this product.

360 View not available for this product.

Product Specs

General

Aftertreatment
SCR
Engine Configuration
V-16
Bore
6.69in
Stroke
8.46in
Displacement
4760in³
Compression Ratio
16.5:1
Aspiration
Turbocharged Aftercooled (TTA)
Combustion System
MEUI
Rotation from Flywheel End
Counterclockwise

Power Rating

Minimum Power
2100HP
Maximum Power
2100HP
Maximum Torque
8275lb-ft @ 1200 rpm
Rated Speed
1650 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage V

Engine Dimensions - Approximate

Length
122.2in
Width
63.6in
Height
83in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
18025lb

Aftertreatment Dimensions

Length
92.5in
Width
79.1in
Height
31.9in
Weight
2378lb

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Four turbochargers, centre mounted
    • Air-to-Air Aftercooled (ATAAC)
  • Control System
    • Electronic engine control
  • Exhaust System
    • Two exhaust outlets, 203 mm (8 in) round flange
    • Exhaust manifold, dry
    • Four turbochargers with watercooled bearings
  • Cooling System
    • Gear-driven centrifugal jacket water pump
    • Connections for radiator cooling
    • Thermostats and housing
  • Flywheels And Flywheel Housing
    • Flywheel housing, SAE No. 0 or SAE No. 00
    • Flywheel, SAE No. 18 or SAE No. 21
    • SAE standard rotation
  • Fuel System
    • Fuel filter, LH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler and dipstick, LH
    • Oil pump
    • Oil filter, LH, spin-on type
    • Front sump oil pan, 500-hour change interval
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
    • Vibration damper
    • Lifting eyes

Optional Equipment: