Cat® C0.7 Diesel Engine

The C0.7 Industrial Diesel Engine is offered in ratings ranging from 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm. These ratings meet EPA Tier 4 emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

Request a Quote
Minimum Power
16.4 bhp
Maximum Power
20.5 bhp
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Rated Speed
2800-3600 rpm

Videos not available for this product.

360 View not available for this product.

Product Specs

Power Rating

Minimum Power
16.4bhp
Maximum Power
20.5bhp
Rated Speed
2800-3600 rpm
Minimum Power
16.4BHP
Maximum Power
20.5BHP
Rated Speed
2800-3600 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
67 mm (2.64 in)
Stroke
72 mm (2.83 in)
Displacement
.762 L (46.5 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23.5:1
Combustion System
Indirect Injection
Rotation (from flywheel end)
Counterclockwise
Lube System (refill)
2.35-3.05 L (2.48-3.22 qt)
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
67 mm (2.64 in)
Stroke
72 mm (2.83 in)
Aspiration
Naturally Aspirated (NA)
Displacement
.762 L (46.5 in³)
Compression Ratio
23.5:1
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Lube System - Refill
2.35-3.05 L (2.48-3.22 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
480 mm (18.9 in)
Width
371 mm (14.6 in)
Height
528 mm (20.8 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
71 kg (156.5 lb)

Engine Dimensions - Approximate

Height
528 mm (20.8 in)
Length
480 mm (18.9 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
71 kg (156.5 lb)
Width
371 mm (14.6 in)

Standard/Optional Features

Standard Equipment:

  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: