Cat® C1.5 Diesel Engine

The Cat® C1.5 Industrial Diesel Engine is offered in ratings ranging from 18.4-27.6 bkW (24.7-37.0 bhp) @ 1800-3000 rpm and meet U.S. EPA Tier 4 Final emission standards. Ratings: 20.9-30.0 bkW (28.0-40.2bhp) @ 2200-3000 rpm meet EU Stage IIIA emission standards and are also available in Europe and other regions. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

Request a Quote
Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Bore
84 mm (3.3 in)
Stroke
90 mm (3.5 in)
Displacement
1.496 L (91 in³)

Videos not available for this product.

360 View not available for this product.

Product Specs

General

Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Bore
84 mm (3.3 in)
Stroke
90 mm (3.5 in)
Displacement
1.496 L (91 in³)
Cooling System Capacity
2.6 L (2.75 qt)
Lube System (refill)
6 L (6.3 qt)
Aspiration
Naturally Aspirated (NA) or Turbocharged (T)
Compression Ratio
22.5:1
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Bore
84 mm (3.3 in)
Stroke
90 mm (3.5 in)
Displacement
1.496 L (91 in³)
Cooling System - Capacity
2.6 L (2.75 qt)
Lube System - Refill
6 L (6.3 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
572 mm (22.5 in)
Width
453-512 mm (17.8-20.2 in)
Height
643 mm (25.3 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
149-156.5 kg (328.5-345 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
449 mm, 17.6 in (Tier 4 Final only)
Weight
13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)
Diameter
170 mm (6.7 in) (Tier 4 Final only)

Power Rating

Minimum Power
24.7BHP
Maximum Power
40.2BHP
Rated Speed
2100-3000 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final or EU Stage IIIA

Engine Dimensions - Approximate

Height
643 mm (25.3 in)
Length
572 mm (22.5 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
149-156.5 kg (328.5-345 lb)
Width
453-512 mm (17.8-20.2 in)

Aftertreatment Dimensions - Approximate

Diameter
170 mm (6.7 in) (Tier 4 Final only)
Length
449 mm, 17.6 in (Tier 4 Final only)
Weight
13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
    • Tier 4 Final: Alternator 12V 85 amp
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel & Flywheel Housing
    • Naturally Aspirated: SAE No. 7 1/2 flywheel
    • Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
    • Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
    • Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
    • EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel
    • Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for Power Take Off (PTO)
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
  • Tier 4 Final Aftertreatment / Clean Emissions Control Equipment)
    • Diesel Particulate Filter (DPF)
    • Diesel Oxidation Catalyst (DOC)
    • Passive Regeneration System with Backup

Optional Equipment: