3606 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote
Bore
11 in
Displacement
1127 in3
Stroke
11.8 in
Aspiration
TA

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Bore
11in
Displacement
1127in3
Stroke
11.8in
Aspiration
TA
Fuel System
Direct unit injection
Engine Model
3606 I-6, 4-Stroke Water-Cooled Diesel
Total Displacement
6762in³
Compression Ratio
13:01
Governor Type
Generator Set Monitoring System (GMS)
Aspiration
TA
Fuel System
Direct unit injection
Bore
11in
Displacement
6762in³
Stroke
11.8in
Fuel System
6762in³

Generator Set Specifications

Minimum Rating
1775 kVA
Maximum Rating
2688 kVA
Frequency
50 Hz
Speed
750 & 1000 rpm
Emissions/Fuel Strategy
Low Fuel Consumption
Duty Cycle
Continuous

Generator Set Dimensions

Length - Maximum
404in
Width - Maximum
99.62in
Height - Maximum
156.6in
Dry Weight - Genset (maximum)
74970lb

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, Flexible exhaust fitting
  • Fuel System
    • Simplex or Duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water

Optional Equipment:

  • Air Inlet System
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
    • Air inlet adapter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Air cleaner
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Cooling system aids
    • Heating aids
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Duplex primary fuel strainer
    • Fuel priming pump
  • Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
  • Governor System
    • Electronic / actuators
    • Digital programmers
    • 2301 A load share
    • EGB actuator
    • Battery backup / Power supply
    • 723 Plus
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Non-vertically restrained
    • Spring type vibration isolator
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Compressed air flex hose
    • Pressure reducing valve
  • General:
    • Custom paint colors