3612 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote
Bore
11 in
Displacement
1127 in3
Stroke
11.8 in
Aspiration
TA

Videos not available for this product.

360 View not available for this product.

Product Specs

Engine Specifications

Bore
11in
Displacement
1127in3
Stroke
11.8in
Aspiration
TA
Fuel System
Direct unit injection
Engine Model
3612 V-12,4-Stroke Water-Cooled Diesel
Total Displacement
13524in³
Compression Ratio
13:01
Governor Type
Generator Set Monitoring System (GMS)
Aspiration
TA
Fuel System
Direct unit injection
Bore
11in
Displacement
13524in³
Stroke
11.8in
Fuel System
13524in³

Generator Set Specifications

Minimum Rating
3300 ekW
Maximum Rating
4000 ekW
Frequency
60 Hz
Speed
720 & 900 rpm
Emissions/Fuel Strategy
Low Fuel Consumption
Duty Cycle
Prime, Continuous

Generator Set Dimensions

Length - Maximum
404in
Width - Maximum
99.62in
Height - Maximum
156.6in
Dry Weight - Genset (maximum)
112690lb

Standard/Optional Features

Standard Equipment:

  • Air Inlet System
    • Turbocharger, watercooled, engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air cleaner
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
  • Cooling System
    • Jacket water thermostats
    • Engine coolant water drains
    • Water temperature regulator
    • Three-bundle oil cooler
    • Front mounted turbos
  • Exhaust System
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by Dealer
  • Governor System
    • UG actuator
  • Lube System
    • Oil pressure regulating valve
    • Oil filler and dipstick
    • Service side engine mounted on cylinder block inspection covers
    • Wet oil sump. Includes engine-driven main lubrication & oil pumps, oil lines and oil pan
    • Centrifugal oil filters with single shutoff
    • Crankcase explosion relief valves
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
    • Two motors, engine mounted at rear, on left side
  • General:
    • Gear driven pumps: Fuel / Oil / Jacket water / Aftercooler / Oil cooler water
    • Paint, Caterpillar yellow

Optional Equipment:

  • Air Inlet System
    • Boost control valve
    • Air inlet adapter
    • Soot Filter
    • Vertical Support Bracket
    • Air cleaner louver assembly
    • Heavy duty air cleaner
  • Cooling System
    • Heat exchanger for single circuit
    • Heating aids
    • Cooling system aids
    • Expansion tank
    • Auxiliary water pump
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Fuel priming pump
    • Duplex primary fuel strainer
  • Generator System
    • Busbar connections
    • Anti-condensation space heaters
    • Class F insulation
    • Winding temperature detectors
    • 3 Phase, six leads, WYE
  • Governor System
    • 723 Plus
    • Digital programmers
    • Electronic / Actuators
    • Battery backup / Power supply
    • 230 UA
    • EGB actuator
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolator
    • Non-vertically restrained
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Redundant air starters
    • Turbine type air starters
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom Paint Colors