C18 Generator Set
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Request a Quote
Product Specs
Engine Specifications
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Fuel System
- Electronic unit injection
- Engine Model
- C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 145 mm (5.71 in)
- Displacement
- 18.13 L (1106.36 in3)
- Stroke
- 183 mm (7.2 in)
- Compression Ratio
- 14.5:1
- Governor Type
- Adem™A4
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Bore
- 5.71in
- Displacement
- 1106.4in³
- Stroke
- 7.2in
Generator Set Specifications
- Minimum Rating
- 500 ekW
- Maximum Rating
- 600 ekW
- Voltage
- 220 to 380 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Duty Cycle
- Standby, Prime
Generator Set Dimensions
- Height - Maximum
- 107.8in
- Length - Maximum
- 218.5in
- Width - Maximum
- 80.9in
Standard/Optional Features
Standard Equipment:
-
- Air Inlet
-
- Air Cleaner
-
- Cooling
-
- Package mounted radiator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Fuel priming pump
- Secondary fuel filter
- Primary fuel filter with integral water separator
-
- Generator
-
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
- Power Termination
-
- Bus Bar
-
- Control Panel
-
- EMCP 4.2
-
- Mounting
-
- Rubber vibration isolators
-
- Starting/charging
-
- 24 volt starting motor
- Batteries
-
- General
-
- Paint - Caterpillar Yellow except rails and radiators gloss black
Optional Equipment:
-
- Exhaust
-
- Industrial, Residential, Critical Mufflers
-
- Generator
-
- Anti-condensation heater
- Oversize and premium generators
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
-
- Power Termination
-
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
- Control Panels
-
- Remote monitoring software
- Local & remote annunciator modules
- Digital I/O module
- EMCP 4.4
- Load share module
-
- Starting/charging
-
- Oversize batteries
- Battery chargers
- Heavy-duty starting system
- Jacket water heater
- Charging alternator
-
- General
-
- Narrow, Wide or Skid Base
- CSA Certification
- UL 2200 package
- EU Certificate of Conformance (CE)
- Enclosures: sound attenuated, weather protective
- Single or dual wall integral fuel tanks
- Integral & sub-base UL listed dual wall fuel tanks
- Automatic transfer switches (ATS)
- Sound attenuated, weather protective or high ambient weather protective enclosure
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- EEC Declaration of Conformity
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007